linux-toradex.git/drivers/tty/serial, branch v3.0.25 Linux kernel for Apalis and Colibri modules jsm: Fixed EEH recovery error 2012-02-03T17:19:00+00:00 Lucas Kannebley Tavares lucaskt@linux.vnet.ibm.com 2012-01-09T12:58:06+00:00 d5f0416d678ccf6e903002637c3bd9ce82ddb30f commit 26aa38cafae0dbef3b2fe75ea487c83313c36d45 upstream. There was an error on the jsm driver that would cause it to be unable to recover after a second error is detected. At the first error, the device recovers properly: [72521.485691] EEH: Detected PCI bus error on device 0003:02:00.0 [72521.485695] EEH: This PCI device has failed 1 times in the last hour: ... [72532.035693] ttyn3 at MMIO 0x0 (irq = 49) is a jsm [72532.105689] jsm: Port 3 added However, at the second error, it cascades until EEH disables the device: [72631.229549] Call Trace: ... [72641.725687] jsm: Port 3 added [72641.725695] EEH: Detected PCI bus error on device 0003:02:00.0 [72641.725698] EEH: This PCI device has failed 3 times in the last hour: It was caused because the PCI state was not being saved after the first restore. Therefore, at the second recovery the PCI state would not be restored. Signed-off-by: Lucas Kannebley Tavares <lucaskt@linux.vnet.ibm.com> Signed-off-by: Breno Leitao <brenohl@br.ibm.com> Acked-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 26aa38cafae0dbef3b2fe75ea487c83313c36d45 upstream.

There was an error on the jsm driver that would cause it to be unable to
recover after a second error is detected.

At the first error, the device recovers properly:

[72521.485691] EEH: Detected PCI bus error on device 0003:02:00.0
[72521.485695] EEH: This PCI device has failed 1 times in the last hour:
...
[72532.035693] ttyn3 at MMIO 0x0 (irq = 49) is a jsm
[72532.105689] jsm: Port 3 added

However, at the second error, it cascades until EEH disables the device:

[72631.229549] Call Trace:
...
[72641.725687] jsm: Port 3 added
[72641.725695] EEH: Detected PCI bus error on device 0003:02:00.0
[72641.725698] EEH: This PCI device has failed 3 times in the last hour:

It was caused because the PCI state was not being saved after the first
restore. Therefore, at the second recovery the PCI state would not be
restored.

Signed-off-by: Lucas Kannebley Tavares <lucaskt@linux.vnet.ibm.com>
Signed-off-by: Breno Leitao <brenohl@br.ibm.com>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: amba-pl011: lock console writes against interrupts 2012-02-03T17:19:00+00:00 Rabin Vincent rabin.vincent@stericsson.com 2012-01-17T10:52:28+00:00 f0661faa597be0c7fb7612e8968c2f508e168adf commit ef605fdb33883d687cff5ba75095a91b313b4966 upstream. Protect against pl011_console_write() and the interrupt for the console UART running concurrently on different CPUs. Otherwise the console_write could spin for a long time waiting for the UART to become not busy, while the other CPU continuously services UART interrupts and keeps the UART busy. The checks for sysrq and oops_in_progress are taken from 8250.c. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Reviewed-by: Bibek Basu <bibek.basu@stericsson.com> Reviewed-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ef605fdb33883d687cff5ba75095a91b313b4966 upstream.

Protect against pl011_console_write() and the interrupt for
the console UART running concurrently on different CPUs.

Otherwise the console_write could spin for a long time
waiting for the UART to become not busy, while the other
CPU continuously services UART interrupts and keeps the
UART busy.

The checks for sysrq and oops_in_progress are taken
from 8250.c.

Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Reviewed-by: Bibek Basu <bibek.basu@stericsson.com>
Reviewed-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
atmel_serial: fix spinlock lockup in RS485 code 2012-01-12T19:35:07+00:00 Claudio Scordino claudio@evidence.eu.com 2011-12-16T14:08:49+00:00 630fe244a944ebb950e8b2076177547266d255cf commit dbf1115d3f8c7052788aa4e6e46abd27f3b3eeba upstream. Patch to fix a spinlock lockup in the driver that sometimes happens when the tasklet starts. Signed-off-by: Claudio Scordino <claudio@evidence.eu.com> Signed-off-by: Dave Bender <codehero@gmail.com> Tested-by: Dave Bender <codehero@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit dbf1115d3f8c7052788aa4e6e46abd27f3b3eeba upstream.

Patch to fix a spinlock lockup in the driver that sometimes happens when the
tasklet starts.

Signed-off-by: Claudio Scordino <claudio@evidence.eu.com>
Signed-off-by: Dave Bender <codehero@gmail.com>
Tested-by: Dave Bender <codehero@gmail.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
pch_uart: Support new device LAPIS Semiconductor ML7831 IOH 2011-11-26T17:09:57+00:00 Tomoya MORINAGA tomoya-linux@dsn.lapis-semi.com 2011-10-28T00:38:49+00:00 6e6d3ebc5179779d72837ff38749843506fd6f7f commit 8249f743f732ccbc3056428945ab1d9bd36d46bf upstream. ML7831 is companion chip for Intel Atom E6xx series. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit 8249f743f732ccbc3056428945ab1d9bd36d46bf upstream.

ML7831 is companion chip for Intel Atom E6xx series.

Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
pch_uart: Fix DMA resource leak issue 2011-11-26T17:09:57+00:00 Tomoya MORINAGA tomoya.rohm@gmail.com 2011-11-11T01:55:27+00:00 b74d0a317e75a602085cf73428bfe7ad456aee85 commit 90f04c2926cfb5bf74533b0a7766bc896f6a0c0e upstream. Changing UART mode PIO->DMA->PIO->DMA like below, pch_uart driver can't get DMA channel resource. setserial /dev/ttyPCH0 ^low_latency setserial /dev/ttyPCH0 low_latency CAUSE: Changing mode using setserial command, ".startup" function which gets DMA channel is called before ".verify_port" function which sets dma-flag(use_dma/use_dma_flag) as 1. PIO->DMA .startup: Since dma-flag is 0, DMA channel is not requested. .verify_port: dma-flag is set as 1. .shutdown: N/A DMA->PIO .startup: Since dma-flag is 1, DMA channel is requested. .verify_port: dma-flag is set as 0. .shutdown: Since dma-flag is 0, DMA channel is not released. This means DMA channel resource leak occurs. Next time, this driver can't get DMA channel resource forever. MODIFICATION: Currently, when release DMA channel resource, this driver checks dma-flag. However, this specification occurs the above issue. This driver must check whether dma_request_channel is executed or not. The values are saved in private data variable "chan_tx/chan_tx". These variables mean if the value is NULL, DMA channel is not requested, if not NULL, DMA channel is requested. This patch fixes the issue. Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit 90f04c2926cfb5bf74533b0a7766bc896f6a0c0e upstream.

Changing UART mode PIO->DMA->PIO->DMA like below, pch_uart driver can't get
DMA channel resource.

setserial /dev/ttyPCH0 ^low_latency
setserial /dev/ttyPCH0 low_latency

CAUSE:
Changing mode using setserial command, ".startup" function which gets DMA
channel is called before ".verify_port" function which sets
dma-flag(use_dma/use_dma_flag) as 1.

PIO->DMA
  .startup: Since dma-flag is 0, DMA channel is not requested.
  .verify_port: dma-flag is set as 1.
  .shutdown: N/A

DMA->PIO
  .startup: Since dma-flag is 1, DMA channel is requested.
  .verify_port: dma-flag is set as 0.
  .shutdown: Since dma-flag is 0, DMA channel is not released.

This means DMA channel resource leak occurs.
Next time, this driver can't get DMA channel resource forever.

MODIFICATION:
  Currently, when release DMA channel resource, this driver checks dma-flag.
  However, this specification occurs the above issue.
  This driver must check whether dma_request_channel is executed or not.
  The values are saved in private data variable "chan_tx/chan_tx".
  These variables mean if the value is NULL, DMA channel is not requested,
  if not NULL, DMA channel is requested.

This patch fixes the issue.

Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
pch_uart: Fix hw-flow control issue 2011-11-26T17:09:57+00:00 Tomoya MORINAGA tomoya-linux@dsn.lapis-semi.com 2011-10-27T06:45:18+00:00 3f04930ad551f504006e35ba5b6d6f717406638c commit a1d7cfe29f13cf45f8094929864b9c66bf0cd91b upstream. Using hardware flow control, currently, register of the control-bit(AFE) is not set. This patch fixes the issue. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit a1d7cfe29f13cf45f8094929864b9c66bf0cd91b upstream.

Using hardware flow control,
currently, register of the control-bit(AFE) is not set.
This patch fixes the issue.

Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
jsm: remove buggy write queue 2011-11-11T17:36:24+00:00 Thadeu Lima de Souza Cascardo cascardo@linux.vnet.ibm.com 2011-08-24T16:14:22+00:00 6c3ad7aee6e6d62169948d09f2b4a1279d253cbe commit 9d898966c4a07e4a5092215b5a2829d0ef02baa2 upstream. jsm uses a write queue that copies from uart_core circular buffer. This copying however has some bugs, like not wrapping the head counter. Since this write queue is also a circular buffer, the consumer function is ready to use the uart_core circular buffer directly. This buggy copying function was making some bytes be dropped when transmitting to a raw tty, doing something like this. [root@hostname ~]$ cat /dev/ttyn1 > cascardo/dump & [1] 2658 [root@hostname ~]$ cat /proc/tty/drivers > /dev/ttyn0 [root@hostname ~]$ cat /proc/tty/drivers /dev/tty /dev/tty 5 0 system:/dev/tty /dev/console /dev/console 5 1 system:console /dev/ptmx /dev/ptmx 5 2 system /dev/vc/0 /dev/vc/0 4 0 system:vtmaster jsm /dev/ttyn 250 0-31 serial serial /dev/ttyS 4 64-95 serial hvc /dev/hvc 229 0-7 system pty_slave /dev/pts 136 0-1048575 pty:slave pty_master /dev/ptm 128 0-1048575 pty:master unknown /dev/tty 4 1-63 console [root@hostname ~]$ cat cascardo/dump /dev/tty /dev/tty 5 0 system:/dev/tty /dev/console /dev/console 5 1 system:console /dev/ptmx /dev/ptmx 5 2 system /dev/vc/0 /dev/vc/0 4 0 system:vtmaste[root@hostname ~]$ This patch drops the driver write queue entirely, using the circular buffer from uart_core only. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit 9d898966c4a07e4a5092215b5a2829d0ef02baa2 upstream.

jsm uses a write queue that copies from uart_core circular buffer. This
copying however has some bugs, like not wrapping the head counter. Since
this write queue is also a circular buffer, the consumer function is
ready to use the uart_core circular buffer directly.

This buggy copying function was making some bytes be dropped when
transmitting to a raw tty, doing something like this.

[root@hostname ~]$ cat /dev/ttyn1 > cascardo/dump &
[1] 2658
[root@hostname ~]$ cat /proc/tty/drivers > /dev/ttyn0
[root@hostname ~]$ cat /proc/tty/drivers
/dev/tty             /dev/tty        5       0 system:/dev/tty
/dev/console         /dev/console    5       1 system:console
/dev/ptmx            /dev/ptmx       5       2 system
/dev/vc/0            /dev/vc/0       4       0 system:vtmaster
jsm                  /dev/ttyn     250 0-31 serial
serial               /dev/ttyS       4 64-95 serial
hvc                  /dev/hvc      229 0-7 system
pty_slave            /dev/pts      136 0-1048575 pty:slave
pty_master           /dev/ptm      128 0-1048575 pty:master
unknown              /dev/tty        4 1-63 console
[root@hostname ~]$ cat cascardo/dump
/dev/tty             /dev/tty        5       0 system:/dev/tty
/dev/console         /dev/console    5       1 system:console
/dev/ptmx            /dev/ptmx       5       2 system
/dev/vc/0            /dev/vc/0       4       0 system:vtmaste[root@hostname ~]$

This patch drops the driver write queue entirely, using the circular
buffer from uart_core only.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
serial-core: power up uart port early before we do set_termios when resuming 2011-11-11T17:35:15+00:00 Ning Jiang ning.jiang@marvell.com 2011-09-05T08:28:18+00:00 3e9efdd45f78e0ad859b60906c6556e8efe2579b commit 94abc56f4d90f289ea32a0a11d3577fcd8cb28fb upstream. The following patch removed uart_change_pm() in uart_resume_port(): commit 5933a161abcb8d83a2c145177f48027c3c0a8995 Author: Yin Kangkai <kangkai.yin@linux.intel.com> serial-core: reset the console speed on resume It will break the pxa serial driver when the system resumes from suspend mode as it will try to set baud rate divider register in set_termios but with clock off. The register value can not be set correctly on some platform if the clock is disabled. The pxa driver will check the value and report the following warning: ------------[ cut here ]------------ WARNING: at drivers/tty/serial/pxa.c:545 serial_pxa_set_termios+0x1dc/0x250() Modules linked in: [<c0281f30>] (unwind_backtrace+0x0/0xf0) from [<c029341c>] (warn_slowpath_common+0x4c/0x64) [<c029341c>] (warn_slowpath_common+0x4c/0x64) from [<c029344c>] (warn_slowpath_null+0x18/0x1c) [<c029344c>] (warn_slowpath_null+0x18/0x1c) from [<c044b1e4>] (serial_pxa_set_termios+0x1dc/0x250) [<c044b1e4>] (serial_pxa_set_termios+0x1dc/0x250) from [<c044a840>] (uart_resume_port+0x128/0x2dc) [<c044a840>] (uart_resume_port+0x128/0x2dc) from [<c044bbe0>] (serial_pxa_resume+0x18/0x24) [<c044bbe0>] (serial_pxa_resume+0x18/0x24) from [<c0454d34>] (platform_pm_resume+0x40/0x4c) [<c0454d34>] (platform_pm_resume+0x40/0x4c) from [<c0457ebc>] (pm_op+0x68/0xb4) [<c0457ebc>] (pm_op+0x68/0xb4) from [<c0458368>] (device_resume+0xb0/0xec) [<c0458368>] (device_resume+0xb0/0xec) from [<c04584c8>] (dpm_resume+0xe0/0x194) [<c04584c8>] (dpm_resume+0xe0/0x194) from [<c0458588>] (dpm_resume_end+0xc/0x18) [<c0458588>] (dpm_resume_end+0xc/0x18) from [<c02c518c>] (suspend_devices_and_enter+0x16c/0x1ac) [<c02c518c>] (suspend_devices_and_enter+0x16c/0x1ac) from [<c02c5278>] (enter_state+0xac/0xdc) [<c02c5278>] (enter_state+0xac/0xdc) from [<c02c48ec>] (state_store+0xa0/0xbc) [<c02c48ec>] (state_store+0xa0/0xbc) from [<c0408f7c>] (kobj_attr_store+0x18/0x1c) [<c0408f7c>] (kobj_attr_store+0x18/0x1c) from [<c034a6a4>] (sysfs_write_file+0x108/0x140) [<c034a6a4>] (sysfs_write_file+0x108/0x140) from [<c02fb798>] (vfs_write+0xac/0x134) [<c02fb798>] (vfs_write+0xac/0x134) from [<c02fb8cc>] (sys_write+0x3c/0x68) [<c02fb8cc>] (sys_write+0x3c/0x68) from [<c027c700>] (ret_fast_syscall+0x0/0x2c) ---[ end trace 88289eceb4675b04 ]--- This patch fix the problem by adding the power on opertion back for uart console when console_suspend_enabled is true. Signed-off-by: Ning Jiang <ning.jiang@marvell.com> Tested-by: Mayank Rana <mrana@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit 94abc56f4d90f289ea32a0a11d3577fcd8cb28fb upstream.

The following patch removed uart_change_pm() in uart_resume_port():

commit 5933a161abcb8d83a2c145177f48027c3c0a8995
Author: Yin Kangkai <kangkai.yin@linux.intel.com>
    serial-core: reset the console speed on resume

It will break the pxa serial driver when the system resumes from suspend mode
as it will try to set baud rate divider register in set_termios but with
clock off. The register value can not be set correctly on some platform if
the clock is disabled. The pxa driver will check the value and report the
following warning:

------------[ cut here ]------------
WARNING: at drivers/tty/serial/pxa.c:545 serial_pxa_set_termios+0x1dc/0x250()
Modules linked in:
[<c0281f30>] (unwind_backtrace+0x0/0xf0) from [<c029341c>] (warn_slowpath_common+0x4c/0x64)
[<c029341c>] (warn_slowpath_common+0x4c/0x64) from [<c029344c>] (warn_slowpath_null+0x18/0x1c)
[<c029344c>] (warn_slowpath_null+0x18/0x1c) from [<c044b1e4>] (serial_pxa_set_termios+0x1dc/0x250)
[<c044b1e4>] (serial_pxa_set_termios+0x1dc/0x250) from [<c044a840>] (uart_resume_port+0x128/0x2dc)
[<c044a840>] (uart_resume_port+0x128/0x2dc) from [<c044bbe0>] (serial_pxa_resume+0x18/0x24)
[<c044bbe0>] (serial_pxa_resume+0x18/0x24) from [<c0454d34>] (platform_pm_resume+0x40/0x4c)
[<c0454d34>] (platform_pm_resume+0x40/0x4c) from [<c0457ebc>] (pm_op+0x68/0xb4)
[<c0457ebc>] (pm_op+0x68/0xb4) from [<c0458368>] (device_resume+0xb0/0xec)
[<c0458368>] (device_resume+0xb0/0xec) from [<c04584c8>] (dpm_resume+0xe0/0x194)
[<c04584c8>] (dpm_resume+0xe0/0x194) from [<c0458588>] (dpm_resume_end+0xc/0x18)
[<c0458588>] (dpm_resume_end+0xc/0x18) from [<c02c518c>] (suspend_devices_and_enter+0x16c/0x1ac)
[<c02c518c>] (suspend_devices_and_enter+0x16c/0x1ac) from [<c02c5278>] (enter_state+0xac/0xdc)
[<c02c5278>] (enter_state+0xac/0xdc) from [<c02c48ec>] (state_store+0xa0/0xbc)
[<c02c48ec>] (state_store+0xa0/0xbc) from [<c0408f7c>] (kobj_attr_store+0x18/0x1c)
[<c0408f7c>] (kobj_attr_store+0x18/0x1c) from [<c034a6a4>] (sysfs_write_file+0x108/0x140)
[<c034a6a4>] (sysfs_write_file+0x108/0x140) from [<c02fb798>] (vfs_write+0xac/0x134)
[<c02fb798>] (vfs_write+0xac/0x134) from [<c02fb8cc>] (sys_write+0x3c/0x68)
[<c02fb8cc>] (sys_write+0x3c/0x68) from [<c027c700>] (ret_fast_syscall+0x0/0x2c)
---[ end trace 88289eceb4675b04 ]---

This patch fix the problem by adding the power on opertion back for uart
console when console_suspend_enabled is true.

Signed-off-by: Ning Jiang <ning.jiang@marvell.com>
Tested-by: Mayank Rana <mrana@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
serial: pxa: work around for errata #20 2011-11-11T17:35:15+00:00 Marcus Folkesson marcus.folkesson@gmail.com 2011-08-30T11:53:10+00:00 d5fe5d1648b88aa16b5d97d088d9b743bc9ce0a8 commit e44aabd649c80e8be16ede3ed3cbff6fb2561ca9 upstream. Errata E20: UART: Character Timeout interrupt remains set under certain software conditions. Implication: The software servicing the UART can be trapped in an infinite loop. Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit e44aabd649c80e8be16ede3ed3cbff6fb2561ca9 upstream.

Errata E20: UART: Character Timeout interrupt remains set under certain
software conditions.

Implication: The software servicing the UART can be trapped in an infinite loop.

Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
cris: fix a build error in drivers/tty/serial/crisv10.c 2011-11-11T17:35:11+00:00 WANG Cong xiyou.wangcong@gmail.com 2011-09-01T05:58:29+00:00 47bbdafa8ab90e3d4b7a4c6dd9bf54f7bc6df66d commit 2f7861de111bb8e33e6ab9f9607583c6fbc00132 upstream. This patch fixes the following build error: drivers/tty/serial/crisv10.c:4453: error: 'if_ser0' undeclared (first use in this function): 2 errors in 2 logs v3.1-rc4/cris/cris-allmodconfig v3.1-rc4/cris/cris-allyesconfig drivers/tty/serial/crisv10.c:4453: error: (Each undeclared identifier is reported only once: 2 errors in 2 logs v3.1-rc4/cris/cris-allmodconfig v3.1-rc4/cris/cris-allyesconfig drivers/tty/serial/crisv10.c:4453: error: for each function it appears in.): 2 errors in 2 logs v3.1-rc4/cris/cris-allmodconfig v3.1-rc4/cris/cris-allyesconfig "if_ser0" is a typo, it should be "if_serial_0". Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit 2f7861de111bb8e33e6ab9f9607583c6fbc00132 upstream.

This patch fixes the following build error:

drivers/tty/serial/crisv10.c:4453: error: 'if_ser0' undeclared (first use in this function): 2 errors in 2 logs
        v3.1-rc4/cris/cris-allmodconfig v3.1-rc4/cris/cris-allyesconfig
drivers/tty/serial/crisv10.c:4453: error: (Each undeclared identifier is reported only once: 2 errors in 2 logs
        v3.1-rc4/cris/cris-allmodconfig v3.1-rc4/cris/cris-allyesconfig
drivers/tty/serial/crisv10.c:4453: error: for each function it appears in.): 2 errors in 2 logs
        v3.1-rc4/cris/cris-allmodconfig v3.1-rc4/cris/cris-allyesconfig

"if_ser0" is a typo, it should be "if_serial_0".

Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>