linux-toradex.git/drivers/tty/serial, branch v3.10.9 Linux kernel for Apalis and Colibri modules serial/mxs-auart: increase time to wait for transmitter to become idle 2013-08-12T01:35:21+00:00 Uwe Kleine-König u.kleine-koenig@pengutronix.de 2013-06-28T09:49:41+00:00 17e94a63470ddbd191bcc386f55f62987b58f912 commit 079a036f4283e2b0e5c26080b8c5112bc0cc1831 upstream. Without this patch the driver waits ~1 ms for the UART to become idle. At 115200n8 this time is (theoretically) enough to transfer 11.5 characters (= 115200 bits/s / (10 Bits/char) * 1ms). As the mxs-auart has a fifo size of 16 characters the clock is gated too early. The problem is worse for lower baud rates. This only happens to really shut down the transmitter in the middle of a transfer if /dev/ttyAPPx isn't opened in userspace (e.g. by a getty) but was at least once (because the bootloader doesn't disable the transmitter). So increase the timeout to 20 ms which should be enough for 9600n8, too. Moreover skip gating the clock if the timeout is elapsed. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 079a036f4283e2b0e5c26080b8c5112bc0cc1831 upstream.

Without this patch the driver waits ~1 ms for the UART to become idle. At
115200n8 this time is (theoretically) enough to transfer 11.5 characters
(= 115200 bits/s / (10 Bits/char) * 1ms). As the mxs-auart has a fifo size
of 16 characters the clock is gated too early. The problem is worse for
lower baud rates.

This only happens to really shut down the transmitter in the middle of a
transfer if /dev/ttyAPPx isn't opened in userspace (e.g. by a getty) but
was at least once (because the bootloader doesn't disable the transmitter).

So increase the timeout to 20 ms which should be enough for 9600n8, too.
Moreover skip gating the clock if the timeout is elapsed.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: arc_uart: Fix module alias 2013-08-12T01:35:21+00:00 Axel Lin axel.lin@ingics.com 2013-07-21T02:14:15+00:00 9ce440addcbede83e6eb6ad944eef8a894883552 commit d5a12ea7a9e58d9e5c19d25cb668aadb396423ec upstream. Platform drivers use "platform:" prefix in module alias. Also use DRIVER_NAME in MODULE_ALIAS to make module autoloading work. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit d5a12ea7a9e58d9e5c19d25cb668aadb396423ec upstream.

Platform drivers use "platform:" prefix in module alias.
Also use DRIVER_NAME in MODULE_ALIAS to make module autoloading work.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial/mxs-auart: fix race condition in interrupt handler 2013-08-12T01:35:21+00:00 Uwe Kleine-König u.kleine-koenig@pengutronix.de 2013-07-04T09:28:51+00:00 15406011c343c3062cb2aa50b6173dfd87bb951b commit d970d7fe65adff5efe75b4a73c4ffc9be57089f7 upstream. The handler needs to ack the pending events before actually handling them. Otherwise a new event might come in after it it considered non-pending or handled and is acked then without being handled. So this event is only noticed when the next interrupt happens. Without this patch an i.MX28 based machine running an rt-patched kernel regularly hangs during boot. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit d970d7fe65adff5efe75b4a73c4ffc9be57089f7 upstream.

The handler needs to ack the pending events before actually handling them.
Otherwise a new event might come in after it it considered non-pending or
handled and is acked then without being handled. So this event is only
noticed when the next interrupt happens.

Without this patch an i.MX28 based machine running an rt-patched kernel
regularly hangs during boot.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
parisc: Fix interrupt routing for C8000 serial ports 2013-08-12T01:35:21+00:00 Thomas Bogendoerfer tsbogend@alpha.franken.de 2013-07-30T00:02:16+00:00 8a08a2ffd5719ed580862a2e525b8615a8b56a6d commit dd5e6d6a3db09b16b7c222943977865eead88cc3 upstream. We can't use dev->mod_index for selecting the interrupt routing entry, because it's not an index into interrupt routing table. It will be even wrong on a machine with 2 CPUs (4 cores). But all needed information is contained in the PAT entries for the serial ports. mod[0] contains the iosapic address and mod_info has some indications for the interrupt input (at least it looks like it). This patch implements the searching for the right iosapic and uses this interrupt input information. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit dd5e6d6a3db09b16b7c222943977865eead88cc3 upstream.

We can't use dev->mod_index for selecting the interrupt routing entry,
because it's not an index into interrupt routing table. It will be even
wrong on a machine with 2 CPUs (4 cores). But all needed information is
contained in the PAT entries for the serial ports. mod[0] contains the
iosapic address and mod_info has some indications for the interrupt
input (at least it looks like it). This patch implements the searching
for the right iosapic and uses this interrupt input information.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pch_uart: Add uart_clk selection for the MinnowBoard 2013-07-22T01:21:23+00:00 Darren Hart dvhart@linux.intel.com 2013-06-26T01:53:22+00:00 c1d2dfed42f0d8d7eb7d3fa458f93e1e6fdb7e93 commit 29692d05647cb7ecea56242241f77291d5624b95 upstream. Use DMI_BOARD_NAME to determine if we are running on a MinnowBoard and set the uart clock to 50MHz if so. This removes the need to pass the user_uartclk to the kernel at boot time. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Waskiewicz <peter.p.waskiewicz.jr@intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 29692d05647cb7ecea56242241f77291d5624b95 upstream.

Use DMI_BOARD_NAME to determine if we are running on a MinnowBoard and
set the uart clock to 50MHz if so. This removes the need to pass the
user_uartclk to the kernel at boot time.

Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Waskiewicz <peter.p.waskiewicz.jr@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert "serial: 8250_pci: add support for another kind of NetMos Technology PCI 9835 Multi-I/O Controller" 2013-07-13T18:42:26+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2013-06-30T16:03:06+00:00 94b86558ab7109fa41e18d33ca510c0bc17b6cba commit 828c6a102b1f2b8583fadc0e779c46b31d448f0b upstream. This reverts commit 8d2f8cd424ca0b99001f3ff4f5db87c4e525f366. As reported by Stefan, this device already works with the parport_serial driver, so the 8250_pci driver should not also try to grab it as well. Reported-by: Stefan Seyfried <stefan.seyfried@googlemail.com> Cc: Wang YanQing <udknight@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 828c6a102b1f2b8583fadc0e779c46b31d448f0b upstream.

This reverts commit 8d2f8cd424ca0b99001f3ff4f5db87c4e525f366.

As reported by Stefan, this device already works with the parport_serial
driver, so the 8250_pci driver should not also try to grab it as well.

Reported-by: Stefan Seyfried <stefan.seyfried@googlemail.com>
Cc: Wang YanQing <udknight@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
parisc: fix serial ports on C8000 workstation 2013-06-18T18:29:07+00:00 Thomas Bogendoerfer tsbogend@alpha.franken.de 2013-06-09T21:00:21+00:00 9a66d1869d90f13fbaf83dcce5b1aeec86fbc699 The C8000 workstation (64 bit kernel only) has a somewhat different serial port configuration than other models. Thomas Bogendoerfer sent a patch to fix this in September 2010, which was now minimally modified by me. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Helge Deller <deller@gmx.de> 
The C8000 workstation (64 bit kernel only) has a somewhat different
serial port configuration than other models.
Thomas Bogendoerfer sent a patch to fix this in September 2010, which
was now minimally modified by me.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Revert "serial: 8250: Make SERIAL_8250_RUNTIME_UARTS work correctly" 2013-06-03T17:08:28+00:00 Kyle McMartin kyle@infradead.org 2013-06-03T13:38:26+00:00 317a68427d4b0a302ecff252fd83a00557947db8 This reverts commit cfcec52e9781f08948c6eb98198d65c45be75a70. This regresses a longstanding behaviour on X86 systems, which end up with PCI serial ports moving between ttyS4 and ttyS0 when you bisect to opposite sides of this commit, resulting in the need to constantly modify the console setting in order to bisect across it. Please revert, we can work on solving this for ARM platforms in a less disruptive way. Signed-off-by: Kyle McMartin <kyle@mcmartin.ca> Cc: Karthik Manamcheri <karthik.manamcheri@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This reverts commit cfcec52e9781f08948c6eb98198d65c45be75a70.

This regresses a longstanding behaviour on X86 systems, which end up with
PCI serial ports moving between ttyS4 and ttyS0 when you bisect to opposite
sides of this commit, resulting in the need to constantly modify the console
setting in order to bisect across it.

Please revert, we can work on solving this for ARM platforms in a less
disruptive way.

Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
Cc: Karthik Manamcheri <karthik.manamcheri@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: samsung: enable clock before clearing pending interrupts during init 2013-06-03T17:08:28+00:00 Chander Kashyap chander.kashyap@linaro.org 2013-05-28T13:02:07+00:00 60e93575476f90a72146b51283f514da655410a7 Ensure that the uart controller clock is enabled prior to writing to the interrupt mask and pending registers in the s3c24xx_serial_init_port function. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Ensure that the uart controller clock is enabled prior to writing to the
interrupt mask and pending registers in the s3c24xx_serial_init_port
function.

Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial/imx: disable hardware flow control at startup 2013-06-03T17:08:28+00:00 Lucas Stach l.stach@pengutronix.de 2013-05-30T13:47:04+00:00 bff09b099b31a31573b3c5943f805f6a08c714f0 We only want to enable hardware flow control if RTS/CTS pins are connected. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
We only want to enable hardware flow control if RTS/CTS pins
are connected.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>