linux-toradex.git/drivers/tty/serial, branch v3.2.67

serial: samsung: wait for transfer completion before clock disable

2015-02-20T00:49:25+00:00

commit 1ff383a4c3eda8893ec61b02831826e1b1f46b41 upstream.

This patch adds waiting until transmit buffer and shifter will be empty
before clock disabling.

Without this fix it's possible to have clock disabled while data was
not transmited yet, which causes unproper state of TX line and problems
in following data transfers.

Signed-off-by: Robert Baldyga 
Signed-off-by: Greg Kroah-Hartman 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

serial: Fix divide-by-zero fault in uart_get_divisor()

2014-12-14T16:23:55+00:00

commit 547039ec502076e60034eeb79611df3433a99b7d upstream.

uart_get_baud_rate() will return baud == 0 if the max rate is set
to the "magic" 38400 rate and the SPD_* flags are also specified.
On the first iteration, if the current baud rate is higher than the
max, the baud rate is clamped at the max (which in the degenerate
case is 38400). On the second iteration, the now-"magic" 38400 baud
rate selects the possibly higher alternate baud rate indicated by
the SPD_* flag. Since only two loop iterations are performed, the
loop is exited, a kernel WARNING is generated and a baud rate of
0 is returned.

Reproducible with:
 setserial /dev/ttyS0 spd_hi base_baud 38400

Only perform the "magic" 38400 -> SPD_* baud transform on the first
loop iteration, which prevents the degenerate case from recognizing
the clamped baud rate as the "magic" 38400 value.

Reported-by: Robert Święcki 
Signed-off-by: Peter Hurley 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings

sunsab: Fix detection of BREAK on sunsab serial console

2014-09-13T22:41:50+00:00

[ Upstream commit fe418231b195c205701c0cc550a03f6c9758fd9e ]

Fix detection of BREAK on sunsab serial console: BREAK detection was only
performed when there were also serial characters received simultaneously.
To handle all BREAKs correctly, the check for BREAK and the corresponding
call to uart_handle_break() must also be done if count == 0, therefore
duplicate this code fragment and pull it out of the loop over the received
characters.

Patch applies to 3.16-rc6.

Signed-off-by: Christopher Alexander Tobias Schulze 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

serial: core: Preserve termios c_cflag for console resume

2014-09-13T22:41:37+00:00

commit ae84db9661cafc63d179e1d985a2c5b841ff0ac4 upstream.

When a tty is opened for the serial console, the termios c_cflag
settings are inherited from the console line settings.
However, if the tty is subsequently closed, the termios settings
are lost. This results in a garbled console if the console is later
suspended and resumed.

Preserve the termios c_cflag for the serial console when the tty
is shutdown; this reflects the most recent line settings.

Fixes: Bugzilla #69751, 'serial console does not wake from S3'
Reported-by: Valerio Vanni 
Acked-by: Alan Cox 
Signed-off-by: Peter Hurley 
Signed-off-by: Greg Kroah-Hartman 
[bwh: Backported to 3.2: tty_struct::termios is a pointer]
Signed-off-by: Ben Hutchings

TTY: pmac_zilog, check existence of ports in pmz_console_init()

2014-04-01T23:59:00+00:00

commit dc1dc2f8a5dd863bf2e79f338fc3ae29e99c683a upstream.

When booting a multi-platform m68k kernel on a non-Mac with "console=ttyS0"
on the kernel command line, it crashes with:

Unable to handle kernel NULL pointer dereference at virtual address   (null)
Oops: 00000000
PC: [<0013ad28>] __pmz_startup+0x32/0x2a0
...
Call Trace: [<002c5d3e>] pmz_console_setup+0x64/0xe4

The normal tty driver doesn't crash, because init_pmz() checks
pmz_ports_count again after calling pmz_probe().

In the serial console initialization path, pmz_console_init() doesn't do
this, causing the driver to crash later.

Add a check for pmz_ports_count to fix this.

Signed-off-by: Geert Uytterhoeven 
Cc: Finn Thain 
Cc: Benjamin Herrenschmidt 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings

serial: 8250: enable UART_BUG_NOMSR for Tegra

2014-04-01T23:58:41+00:00

commit 3685f19e07802ec4207b52465c408f185b66490e upstream.

Tegra chips have 4 or 5 identical UART modules embedded. UARTs C..E have
their MODEM-control signals tied off to a static state. However UARTs A
and B can optionally route those signals to/from package pins, depending
on the exact pinmux configuration.

When these signals are not routed to package pins, false interrupts may
trigger either temporarily, or permanently, all while not showing up in
the IIR; it will read as NO_INT. This will eventually lead to the UART
IRQ being disabled due to unhandled interrupts. When this happens, the
kernel may print e.g.:

    irq 68: nobody cared (try booting with the "irqpoll" option)

In order to prevent this, enable UART_BUG_NOMSR. This prevents
UART_IER_MSI from being enabled, which prevents the false interrupts
from triggering.

In practice, this is not needed under any of the following conditions:

* On Tegra chips after Tegra30, since the HW bug has apparently been
  fixed.

* On UARTs C..E since their MODEM control signals are tied to the correct
  static state which doesn't trigger the issue.

* On UARTs A..B if the MODEM control signals are routed out to package
  pins, since they will then carry valid signals.

However, we ignore these exceptions for now, since they are only relevant
if a board actually hooks up more than a 4-wire UART, and no currently
supported board does this. If we ever support a board that does, we can
refine the algorithm that enables UART_BUG_NOMSR to take those exceptions
into account, and/or read a flag from DT/... that indicates that the
board has hooked up and pinmux'd more than a 4-wire UART.

Reported-by: Olof Johansson  # autotester
Signed-off-by: Stephen Warren 
Signed-off-by: Greg Kroah-Hartman 
[bwh: Backported to 3.2:
 - Adjust filename
 - s/port->/up->port./]
Signed-off-by: Ben Hutchings

serial: add support for 200 v3 series Titan card

2014-04-01T23:58:40+00:00

commit 48c0247d7b7bf58abb85a39021099529df365c4d upstream.

Signed-off-by: Yegor Yefremov 
Signed-off-by: Greg Kroah-Hartman 
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings

serial: add support for 400 and 800 v3 series Titan cards

2014-04-01T23:58:39+00:00

commit 1e9deb118ed76b9df89d189f27a06522a03cf743 upstream.

add support for 400Hv3, 410Hv3 and 800Hv3

Signed-off-by: Yegor Yefremov 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings

serial: pch_uart: fix tty-kref leak in dma-rx path

2013-10-26T20:06:05+00:00

commit 19b85cfb190eb9980eaf416bff96aef4159a430e upstream.

Fix tty_kref leak when tty_buffer_request room fails in dma-rx path.

Note that the tty ref isn't really needed anymore, but as the leak has
always been there, fixing it before removing should makes it easier to
backport the fix.

Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

serial: pch_uart: fix tty-kref leak in rx-error path

2013-10-26T20:06:05+00:00

commit fc0919c68cb2f75bb1af759315f9d7e2a9443c28 upstream.

Fix tty-kref leak introduced by commit 384e301e ("pch_uart: fix a
deadlock when pch_uart as console") which never put its tty reference.

Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings