Commit 7a637784d517 ("serial: imx: reduce RX interrupt frequency")
introduced a regression on the i.MX6UL EVK board. The issue can be
reproduced with the following steps:

- Open vi on the board.
- Paste a text file (~150 characters).
- Save the file, then repeat the process.
- Compare the sha256sum of the saved files.

The checksums do not match due to missing characters or entire lines.

Fix this by restoring the RXTL value to 1 when the UART is used as a
console.

This ensures timely RX interrupts and reliable data reception in console
mode.

With this change, pasted content is saved correctly, and checksums are
always consistent.

Cc: stable <stable@kernel.org>
Fixes: 7a637784d517 ("serial: imx: reduce RX interrupt frequency")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20250619114617.2791939-1-festevam@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Since in v6.8-rc1, the of_node symlink under tty devices is
missing. This breaks any udev rules relying on this information.

Link the of_node information in the serial controller device with the
parent defined in the device tree. This will also apply to the serial
device which takes the serial controller as a parent device.

Fixes: b286f4e87e32 ("serial: core: Move tty and serdev to be children of serial core port device")
Cc: stable@vger.kernel.org
Signed-off-by: Aidan Stewart <astewart@tektelic.com>
Link: https://lore.kernel.org/r/20250617164819.13912-1-astewart@tektelic.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move this API to the canonical timer_*() namespace.

[ tglx: Redone against pre rc1 ]

Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com

Commit 1788cf6a91d9 ("tty: serial: switch from circ_buf to kfifo")
introduced an error in the TX DMA handling for 8250_omap.

When the OMAP_DMA_TX_KICK flag is set, the "skip_byte" is pulled from
the kfifo and emitted directly in order to start the DMA. While the
kfifo is updated, dma->tx_size is not decreased. This leads to
uart_xmit_advance() called in omap_8250_dma_tx_complete() advancing the
kfifo by one too much.

In practice, transmitting N bytes has been seen to result in the last
N-1 bytes being sent repeatedly.

This change fixes the problem by moving all of the dma setup after the
OMAP_DMA_TX_KICK handling and using kfifo_len() instead of the DMA size
for the 4-byte cutoff check. This slightly changes the behaviour at
buffer wraparound, but it still transmits the correct bytes somehow.

Now, the "skip_byte" would no longer be accounted to the stats. As
previously, dma->tx_size included also this skip byte, up->icount.tx was
updated by aforementioned uart_xmit_advance() in
omap_8250_dma_tx_complete(). Fix this by using the uart_fifo_out()
helper instead of bare kfifo_get().

Based on patch by Mans Rullgard <mans@mansr.com>

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Fixes: 1788cf6a91d9 ("tty: serial: switch from circ_buf to kfifo")
Link: https://lore.kernel.org/all/20250506150748.3162-1-mans@mansr.com/
Reported-by: Mans Rullgard <mans@mansr.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250522053835.3495975-1-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Refactor parity calculations to use the standard parity8() helper.
This change eliminates redundant implementations.

Co-developed-by: Yu-Chun Lin <eleanor15x@gmail.com>
Signed-off-by: Yu-Chun Lin <eleanor15x@gmail.com>
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Link: https://lore.kernel.org/r/20250515081311.775559-1-visitorckw@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

No device was set which caused serial_base_ctrl_add to crash.

 BUG: kernel NULL pointer dereference, address: 0000000000000050
 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
 CPU: 16 UID: 0 PID: 368 Comm: (udev-worker) Not tainted 6.12.25-amd64 #1  Debian 6.12.25-1
 RIP: 0010:serial_base_ctrl_add+0x96/0x120
 Call Trace:
  <TASK>
  serial_core_register_port+0x1a0/0x580
  ? __setup_irq+0x39c/0x660
  ? __kmalloc_cache_noprof+0x111/0x310
  jsm_uart_port_init+0xe8/0x180 [jsm]
  jsm_probe_one+0x1f4/0x410 [jsm]
  local_pci_probe+0x42/0x90
  pci_device_probe+0x22f/0x270
  really_probe+0xdb/0x340
  ? pm_runtime_barrier+0x54/0x90
  ? __pfx___driver_attach+0x10/0x10
  __driver_probe_device+0x78/0x110
  driver_probe_device+0x1f/0xa0
  __driver_attach+0xba/0x1c0
  bus_for_each_dev+0x8c/0xe0
  bus_add_driver+0x112/0x1f0
  driver_register+0x72/0xd0
  jsm_init_module+0x36/0xff0 [jsm]
  ? __pfx_jsm_init_module+0x10/0x10 [jsm]
  do_one_initcall+0x58/0x310
  do_init_module+0x60/0x230

Tested with Digi Neo PCIe 8 port card.

Fixes: 84a9582fd203 ("serial: core: Start managing serial controllers to enable runtime PM")
Cc: stable <stable@kernel.org>
Signed-off-by: Dustin Lundquist <dustin@null-ptr.net>
Link: https://lore.kernel.org/r/3f31d4f75863614655c4673027a208be78d022ec.camel@null-ptr.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Systems that issue PCIe hot reset requests during a suspend/resume
cycle cause PCI1XXXX device revisions prior to C0 to get its UART
configuration registers reset to hardware default values. This results
in device inaccessibility and data transfer failures. Starting with
Revision C0, support was added in the device hardware (via the Hot
Reset Disable Bit) to allow resetting only the PCIe interface and its
associated logic, but preserving the UART configuration during a hot
reset. This patch enables the hot reset disable feature during suspend/
resume for C0 and later revisions of the device.

Signed-off-by: Rengarajan S <rengarajan.s@microchip.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250425145500.29036-1-rengarajan.s@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ExynosAutov920 SoC supports 18 UART ports, update
the value of UART_NR to accommodate the same.

Signed-off-by: Faraz Ata <faraz.ata@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250429102941.4138463-1-faraz.ata@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We need the tty/serial fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Since commit 8700a7ea5519 (serial: 8250_omap: Drop
pm_runtime_irq_safe()), all the serial8250_rpm_*() functions are used
solely in 8250_port.

Unexport them.

Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250425111315.1036184-7-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>