linux-toradex.git/drivers/tty/serial, branch v6.17-rc2

treewide: rename GPIO set callbacks back to their original names

2025-08-07T08:07:06+00:00

The conversion of all GPIO drivers to using the .set_rv() and
.set_multiple_rv() callbacks from struct gpio_chip (which - unlike their
predecessors - return an integer and allow the controller drivers to
indicate failures to users) is now complete and the legacy ones have
been removed. Rename the new callbacks back to their original names in
one sweeping change.

Signed-off-by: Bartosz Golaszewski

Merge tag 'mips_6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

2025-07-31T18:08:55+00:00

Pull MIPS updates from Thomas Bogendoerfer:

 - DT updates for ralink, mobileye and atheros/qualcomm

 - Clean up of mc146818 usage

 - Speed up delay calibration for CPS

 - Other cleanups and fixes

* tag 'mips_6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (50 commits)
  MIPS: Don't use %pK through printk
  MIPS: Update Joshua Kinard's e-mail address
  MIPS: mobileye: dts: eyeq5,eyeq6h: rename the emmc controller
  MIPS: mm: tlb-r4k: Uniquify TLB entries on init
  MIPS: SGI-IP27: Delete an unnecessary check before kfree() in hub_domain_free()
  mips/malta,loongson2ef: use generic mc146818_get_time function
  mips: remove redundant macro mc146818_decode_year
  mips/mach-rm: remove custom mc146818rtc.h file
  mips: remove unused function mc146818_set_rtc_mmss
  MIPS: CPS: Optimise delay CPU calibration for SMP
  MIPS: CPS: Improve mips_cps_first_online_in_cluster()
  MIPS: disable MMID when not supported by the hardware
  MIPS: eyeq5_defconfig: add I2C subsystem, driver and temp sensor driver
  MIPS: eyeq5_defconfig: add GPIO subsystem & driver
  MIPS: mobileye: eyeq5: add two GPIO bank nodes
  MIPS: mobileye: eyeq5: add evaluation board I2C temp sensor
  MIPS: mobileye: eyeq5: add 5 I2C controller nodes
  MIPS: eyeq5_defconfig: Update for v6.16-rc1
  MIPS: vpe-mt: add missing prototypes for vpe_{alloc,start,stop,free}
  mips: boot: use 'targets' instead of extra-y in Makefile
  ...

MIPS: Update Joshua Kinard's e-mail address

2025-07-28T07:57:24+00:00

I am switching my address to a personal domain, so some files in the
SGI IP30 and IOC3 files need to be updated.  I will send updates for
the MAINTAINERS file and rtc-ds1685 separately to linux-rtc.

Signed-off-by: Joshua Kinard 
Signed-off-by: Thomas Bogendoerfer

serial: 8250: fix panic due to PSLVERR

2025-07-24T09:40:41+00:00

When the PSLVERR_RESP_EN parameter is set to 1, the device generates
an error response if an attempt is made to read an empty RBR (Receive
Buffer Register) while the FIFO is enabled.

In serial8250_do_startup(), calling serial_port_out(port, UART_LCR,
UART_LCR_WLEN8) triggers dw8250_check_lcr(), which invokes
dw8250_force_idle() and serial8250_clear_and_reinit_fifos(). The latter
function enables the FIFO via serial_out(p, UART_FCR, p->fcr).
Execution proceeds to the serial_port_in(port, UART_RX).
This satisfies the PSLVERR trigger condition.

When another CPU (e.g., using printk()) is accessing the UART (UART
is busy), the current CPU fails the check (value & ~UART_LCR_SPAR) ==
(lcr & ~UART_LCR_SPAR) in dw8250_check_lcr(), causing it to enter
dw8250_force_idle().

Put serial_port_out(port, UART_LCR, UART_LCR_WLEN8) under the port->lock
to fix this issue.

Panic backtrace:
[    0.442336] Oops - unknown exception [#1]
[    0.442343] epc : dw8250_serial_in32+0x1e/0x4a
[    0.442351]  ra : serial8250_do_startup+0x2c8/0x88e
...
[    0.442416] console_on_rootfs+0x26/0x70

Fixes: c49436b657d0 ("serial: 8250_dw: Improve unwritable LCR workaround")
Link: https://lore.kernel.org/all/84cydt5peu.fsf@jogness.linutronix.de/T/
Signed-off-by: Yunhui Cui 
Reviewed-by: John Ogness 
Cc: stable 
Link: https://lore.kernel.org/r/20250723023322.464-2-cuiyunhui@bytedance.com
Signed-off-by: Greg Kroah-Hartman

serial: qcom-geni: Enable Serial on SA8255p Qualcomm platforms

2025-07-22T16:52:51+00:00

The Qualcomm automotive SA8255p SoC relies on firmware to configure
platform resources, including clocks, interconnects and TLMM.
The driver requests resources operations over SCMI using power
and performance protocols.

The SCMI power protocol enables or disables resources like clocks,
interconnect paths, and TLMM (GPIOs) using runtime PM framework APIs,
such as resume/suspend, to control power states(on/off).

The SCMI performance protocol manages UART baud rates, with each baud
rate represented by a performance level. The driver uses the
dev_pm_opp_set_level() API to request the desired baud rate by
specifying the performance level.

Reviewed-by: Bryan O'Donoghue 
Signed-off-by: Praveen Talari 
Link: https://lore.kernel.org/r/20250721174532.14022-9-quic_ptalari@quicinc.com
Signed-off-by: Greg Kroah-Hartman

serial: qcom-geni: Enable PM runtime for serial driver

2025-07-22T16:52:51+00:00

The GENI serial driver currently handles power resource management
through calls to the statically defined geni_serial_resources_on() and
geni_serial_resources_off() functions. This approach reduces modularity
and limits support for platforms with diverse power management
mechanisms, including resource managed by firmware.

Improve modularity and enable better integration with platform-specific
power management, introduce support for runtime PM. Use
pm_runtime_resume_and_get() and pm_runtime_put_sync() within the
qcom_geni_serial_pm() callback to control resource power state
transitions based on UART power state changes.

Reviewed-by: Bryan O'Donoghue 
Signed-off-by: Praveen Talari 
Link: https://lore.kernel.org/r/20250721174532.14022-8-quic_ptalari@quicinc.com
Signed-off-by: Greg Kroah-Hartman

serial: qcom-geni: move clock-rate logic to separate function

2025-07-22T16:52:50+00:00

Facilitates future modifications within the new function,
leading to better readability and maintainability of the code.

Move the code that handles the actual logic of clock-rate
calculations to a separate function geni_serial_set_rate()
which enhances code readability.

Signed-off-by: Praveen Talari 
Link: https://lore.kernel.org/r/20250721174532.14022-7-quic_ptalari@quicinc.com
Signed-off-by: Greg Kroah-Hartman

serial: qcom-geni: move resource control logic to separate functions

2025-07-22T16:52:50+00:00

Supports use in PM system/runtime frameworks, helping to distinguish new
resource control mechanisms and facilitate future modifications within
the new API.

The code that handles the actual enable or disable of resources like clock
and ICC paths to a separate function (geni_serial_resources_on() and
geni_serial_resources_off()) which enhances code readability.

Introduced minor return checks in newly added function APIs to enhance
error detection and prevent silent failures.

Signed-off-by: Praveen Talari 
Link: https://lore.kernel.org/r/20250721174532.14022-6-quic_ptalari@quicinc.com
Signed-off-by: Greg Kroah-Hartman

serial: qcom-geni: move resource initialization to separate function

2025-07-22T16:52:50+00:00

Enhances code readability and future modifications within the new API.

Move the code that handles the actual initialization of resources
like clock and ICC paths to a separate function, making the
probe function cleaner.

Reviewed-by: Bryan O'Donoghue 
Signed-off-by: Praveen Talari 
Link: https://lore.kernel.org/r/20250721174532.14022-5-quic_ptalari@quicinc.com
Signed-off-by: Greg Kroah-Hartman

serial: 8250_dw: Fix typo "notifer"

2025-07-22T16:52:37+00:00

There is a spelling mistake of 'notifer' in the comment which
should be 'notifier'.

Reviewed-by: Andy Shevchenko 
Signed-off-by: WangYuli 
Link: https://lore.kernel.org/r/BD4804BF4FBA1648+20250722073431.21983-6-wangyuli@uniontech.com
Signed-off-by: Greg Kroah-Hartman