linux-toradex.git/drivers/tty/serial, branch v6.6-rc3

Merge tag 'tty-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2023-09-01T16:38:00+00:00

Pull tty/serial driver updates from Greg KH:
 "Here is the big set of tty and serial driver changes for 6.6-rc1.

  Lots of cleanups in here this cycle, and some driver updates. Short
  summary is:

   - Jiri's continued work to make the tty code and apis be a bit more
     sane with regards to modern kernel coding style and types

   - cpm_uart driver updates

   - n_gsm updates and fixes

   - meson driver updates

   - sc16is7xx driver updates

   - 8250 driver updates for different hardware types

   - qcom-geni driver fixes

   - tegra serial driver change

   - stm32 driver updates

   - synclink_gt driver cleanups

   - tty structure size reduction

  All of these have been in linux-next this week with no reported
  issues. The last bit of cleanups from Jiri and the tty structure size
  reduction came in last week, a bit late but as they were just style
  changes and size reductions, I figured they should get into this merge
  cycle so that others can work on top of them with no merge conflicts"

* tag 'tty-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits)
  tty: shrink the size of struct tty_struct by 40 bytes
  tty: n_tty: deduplicate copy code in n_tty_receive_buf_real_raw()
  tty: n_tty: extract ECHO_OP processing to a separate function
  tty: n_tty: unify counts to size_t
  tty: n_tty: use u8 for chars and flags
  tty: n_tty: simplify chars_in_buffer()
  tty: n_tty: remove unsigned char casts from character constants
  tty: n_tty: move newline handling to a separate function
  tty: n_tty: move canon handling to a separate function
  tty: n_tty: use MASK() for masking out size bits
  tty: n_tty: make n_tty_data::num_overrun unsigned
  tty: n_tty: use time_is_before_jiffies() in n_tty_receive_overrun()
  tty: n_tty: use 'num' for writes' counts
  tty: n_tty: use output character directly
  tty: n_tty: make flow of n_tty_receive_buf_common() a bool
  Revert "tty: serial: meson: Add a earlycon for the T7 SoC"
  Documentation: devices.txt: Fix minors for ttyCPM*
  Documentation: devices.txt: Remove ttySIOC*
  Documentation: devices.txt: Remove ttyIOC*
  serial: 8250_bcm7271: improve bcm7271 8250 port
  ...

Merge tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

2023-08-29T21:53:51+00:00

Pull non-MM updates from Andrew Morton:

 - An extensive rework of kexec and crash Kconfig from Eric DeVolder
   ("refactor Kconfig to consolidate KEXEC and CRASH options")

 - kernel.h slimming work from Andy Shevchenko ("kernel.h: Split out a
   couple of macros to args.h")

 - gdb feature work from Kuan-Ying Lee ("Add GDB memory helper
   commands")

 - vsprintf inclusion rationalization from Andy Shevchenko
   ("lib/vsprintf: Rework header inclusions")

 - Switch the handling of kdump from a udev scheme to in-kernel
   handling, by Eric DeVolder ("crash: Kernel handling of CPU and memory
   hot un/plug")

 - Many singleton patches to various parts of the tree

* tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (81 commits)
  document while_each_thread(), change first_tid() to use for_each_thread()
  drivers/char/mem.c: shrink character device's devlist[] array
  x86/crash: optimize CPU changes
  crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()
  crash: hotplug support for kexec_load()
  x86/crash: add x86 crash hotplug support
  crash: memory and CPU hotplug sysfs attributes
  kexec: exclude elfcorehdr from the segment digest
  crash: add generic infrastructure for crash hotplug support
  crash: move a few code bits to setup support of crash hotplug
  kstrtox: consistently use _tolower()
  kill do_each_thread()
  nilfs2: fix WARNING in mark_buffer_dirty due to discarded buffer reuse
  scripts/bloat-o-meter: count weak symbol sizes
  treewide: drop CONFIG_EMBEDDED
  lockdep: fix static memory detection even more
  lib/vsprintf: declare no_hash_pointers in sprintf.h
  lib/vsprintf: split out sprintf() and friends
  kernel/fork: stop playing lockless games for exe_file replacement
  adfs: delete unused "union adfs_dirtail" definition
  ...

Revert "tty: serial: meson: Add a earlycon for the T7 SoC"

2023-08-27T09:43:01+00:00

This reverts commit 6a4197f9763325043abf7690a21124a9facbf52e

New SoC will use ttyS0 instead of ttyAML, so T7 SoC doesn't need a
OF_EARLYCON_DECLARE.

Fixes: 6a4197f97633 ("tty: serial: meson: Add a earlycon for the T7 SoC")
Signed-off-by: Lucas Tanure 
Link: https://lore.kernel.org/r/20230827082944.5100-1-tanure@linux.com
Signed-off-by: Greg Kroah-Hartman

serial: 8250_bcm7271: improve bcm7271 8250 port

2023-08-22T13:30:59+00:00

The 8250 BCM7271 UART is not a direct match to PORT_16550A and other
generic ports do not match its hardware capabilities. PORT_ALTR matches
the rx trigger levels, but its vendor configurations are not compatible.
Unfortunately this means we need to create another port to fully capture
the hardware capabilities of the BCM7271 UART.

To alleviate some latency pressures, we default the rx trigger level to 8.

Signed-off-by: Justin Chen 
Reviewed-by: Florian Fainelli 
Acked-by: Doug Berger 
Reviewed-by: Andy Shevchenko 
Link: https://lore.kernel.org/r/1692643978-16570-1-git-send-email-justin.chen@broadcom.com
Signed-off-by: Greg Kroah-Hartman

serial: sc16is7xx: add missing support for rs485 devicetree properties

2023-08-22T13:30:00+00:00

Retrieve rs485 devicetree properties on registration of sc16is7xx ports in
case they are attached to an rs485 transceiver.

Signed-off-by: Hugo Villeneuve 
Reviewed-by: Ilpo Järvinen 
Reviewed-by: Lech Perczak 
Tested-by: Lech Perczak 
Link: https://lore.kernel.org/r/20230807214556.540627-7-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman

serial: sc16is7xx: fix bug when first setting GPIO direction

2023-08-22T13:30:00+00:00

When configuring a pin as an output pin with a value of logic 0, we
end up as having a value of logic 1 on the output pin. Setting a
logic 0 a second time (or more) after that will correctly output a
logic 0 on the output pin.

By default, all GPIO pins are configured as inputs. When we enter
sc16is7xx_gpio_direction_output() for the first time, we first set the
desired value in IOSTATE, and then we configure the pin as an output.
The datasheet states that writing to IOSTATE register will trigger a
transfer of the value to the I/O pin configured as output, so if the
pin is configured as an input, nothing will be transferred.

Therefore, set the direction first in IODIR, and then set the desired
value in IOSTATE.

This is what is done in NXP application note AN10587.

Fixes: dfeae619d781 ("serial: sc16is7xx")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve 
Reviewed-by: Lech Perczak 
Tested-by: Lech Perczak 
Link: https://lore.kernel.org/r/20230807214556.540627-6-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman

serial: sc16is7xx: fix regression with GPIO configuration

2023-08-22T13:30:00+00:00

Commit 679875d1d880 ("sc16is7xx: Separate GPIOs from modem control lines")
and commit 21144bab4f11 ("sc16is7xx: Handle modem status lines")
changed the function of the GPIOs pins to act as modem control
lines without any possibility of selecting GPIO function.

As a consequence, applications that depends on GPIO lines configured
by default as GPIO pins no longer work as expected.

Also, the change to select modem control lines function was done only
for channel A of dual UART variants (752/762). This was not documented
in the log message.

Allow to specify GPIO or modem control line function in the device
tree, and for each of the ports (A or B).

Do so by using the new device-tree property named
"nxp,modem-control-line-ports" (property added in separate patch).

When registering GPIO chip controller, mask-out GPIO pins declared as
modem control lines according to this new DT property.

Fixes: 679875d1d880 ("sc16is7xx: Separate GPIOs from modem control lines")
Fixes: 21144bab4f11 ("sc16is7xx: Handle modem status lines")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve 
Reviewed-by: Andy Shevchenko 
Reviewed-by: Lech Perczak 
Tested-by: Lech Perczak 
Acked-by: Rob Herring 
Link: https://lore.kernel.org/r/20230807214556.540627-5-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman

serial: sc16is7xx: remove obsolete out_thread label

2023-08-22T13:30:00+00:00

Commit c8f71b49ee4d ("serial: sc16is7xx: setup GPIO controller later
in probe") moved GPIO setup code later in probe function. Doing so
also required to move ports cleanup code (out_ports label) after the
GPIO cleanup code.

After these moves, the out_thread label becomes misplaced and makes
part of the cleanup code illogical.

This patch remove the now obsolete out_thread label and make GPIO
setup code jump to out_ports label if it fails.

Signed-off-by: Hugo Villeneuve 
Reviewed-by: Lech Perczak 
Tested-by: Lech Perczak 
Reviewed-by: Andy Shevchenko 
Link: https://lore.kernel.org/r/20230807214556.540627-3-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman

serial: sc16is7xx: fix broken port 0 uart init

2023-08-22T13:30:00+00:00

The sc16is7xx_config_rs485() function is called only for the second
port (index 1, channel B), causing initialization problems for the
first port.

For the sc16is7xx driver, port->membase and port->mapbase are not set,
and their default values are 0. And we set port->iobase to the device
index. This means that when the first device is registered using the
uart_add_one_port() function, the following values will be in the port
structure:
    port->membase = 0
    port->mapbase = 0
    port->iobase  = 0

Therefore, the function uart_configure_port() in serial_core.c will
exit early because of the following check:
	/*
	 * If there isn't a port here, don't do anything further.
	 */
	if (!port->iobase && !port->mapbase && !port->membase)
		return;

Typically, I2C and SPI drivers do not set port->membase and
port->mapbase.

The max310x driver sets port->membase to ~0 (all ones). By
implementing the same change in this driver, uart_configure_port() is
now correctly executed for all ports.

Fixes: dfeae619d781 ("serial: sc16is7xx")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve 
Reviewed-by: Ilpo Järvinen 
Reviewed-by: Lech Perczak 
Tested-by: Lech Perczak 
Link: https://lore.kernel.org/r/20230807214556.540627-2-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman

serial: 8250_dw: fall back to poll if there's no interrupt

2023-08-22T13:29:29+00:00

When there's no irq(this can be due to various reasons, for example,
no irq from HW support, or we just want to use poll solution, and so
on), falling back to poll is still better than no support at all.

Signed-off-by: Jisheng Zhang 
Link: https://lore.kernel.org/r/20230806092056.2467-3-jszhang@kernel.org
Signed-off-by: Greg Kroah-Hartman