linux-toradex.git/drivers/tty/vt, branch v5.6-rc6

vt: selection, push sel_lock up

2020-02-28T15:06:49+00:00

sel_lock cannot nest in the console lock. Thanks to syzkaller, the
kernel states firmly:

> WARNING: possible circular locking dependency detected
> 5.6.0-rc3-syzkaller #0 Not tainted
> ------------------------------------------------------
> syz-executor.4/20336 is trying to acquire lock:
> ffff8880a2e952a0 (&tty->termios_rwsem){++++}, at: tty_unthrottle+0x22/0x100 drivers/tty/tty_ioctl.c:136
>
> but task is already holding lock:
> ffffffff89462e70 (sel_lock){+.+.}, at: paste_selection+0x118/0x470 drivers/tty/vt/selection.c:374
>
> which lock already depends on the new lock.
>
> the existing dependency chain (in reverse order) is:
>
> -> #2 (sel_lock){+.+.}:
>        mutex_lock_nested+0x1b/0x30 kernel/locking/mutex.c:1118
>        set_selection_kernel+0x3b8/0x18a0 drivers/tty/vt/selection.c:217
>        set_selection_user+0x63/0x80 drivers/tty/vt/selection.c:181
>        tioclinux+0x103/0x530 drivers/tty/vt/vt.c:3050
>        vt_ioctl+0x3f1/0x3a30 drivers/tty/vt/vt_ioctl.c:364

This is ioctl(TIOCL_SETSEL).
Locks held on the path: console_lock -> sel_lock

> -> #1 (console_lock){+.+.}:
>        console_lock+0x46/0x70 kernel/printk/printk.c:2289
>        con_flush_chars+0x50/0x650 drivers/tty/vt/vt.c:3223
>        n_tty_write+0xeae/0x1200 drivers/tty/n_tty.c:2350
>        do_tty_write drivers/tty/tty_io.c:962 [inline]
>        tty_write+0x5a1/0x950 drivers/tty/tty_io.c:1046

This is write().
Locks held on the path: termios_rwsem -> console_lock

> -> #0 (&tty->termios_rwsem){++++}:
>        down_write+0x57/0x140 kernel/locking/rwsem.c:1534
>        tty_unthrottle+0x22/0x100 drivers/tty/tty_ioctl.c:136
>        mkiss_receive_buf+0x12aa/0x1340 drivers/net/hamradio/mkiss.c:902
>        tty_ldisc_receive_buf+0x12f/0x170 drivers/tty/tty_buffer.c:465
>        paste_selection+0x346/0x470 drivers/tty/vt/selection.c:389
>        tioclinux+0x121/0x530 drivers/tty/vt/vt.c:3055
>        vt_ioctl+0x3f1/0x3a30 drivers/tty/vt/vt_ioctl.c:364

This is ioctl(TIOCL_PASTESEL).
Locks held on the path: sel_lock -> termios_rwsem

> other info that might help us debug this:
>
> Chain exists of:
>   &tty->termios_rwsem --> console_lock --> sel_lock

Clearly. From the above, we have:
 console_lock -> sel_lock
 sel_lock -> termios_rwsem
 termios_rwsem -> console_lock

Fix this by reversing the console_lock -> sel_lock dependency in
ioctl(TIOCL_SETSEL). First, lock sel_lock, then console_lock.

Signed-off-by: Jiri Slaby 
Reported-by: syzbot+26183d9746e62da329b8@syzkaller.appspotmail.com
Fixes: 07e6124a1a46 ("vt: selection, close sel_buffer race")
Cc: stable 
Link: https://lore.kernel.org/r/20200228115406.5735-2-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman

vt: selection, push console lock down

2020-02-28T15:06:49+00:00

We need to nest the console lock in sel_lock, so we have to push it down
a bit. Fortunately, the callers of set_selection_* just lock the console
lock around the function call. So moving it down is easy.

In the next patch, we switch the order.

Signed-off-by: Jiri Slaby 
Fixes: 07e6124a1a46 ("vt: selection, close sel_buffer race")
Cc: stable 
Link: https://lore.kernel.org/r/20200228115406.5735-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman

vt: selection, close sel_buffer race

2020-02-13T20:10:07+00:00

syzkaller reported this UAF:
BUG: KASAN: use-after-free in n_tty_receive_buf_common+0x2481/0x2940 drivers/tty/n_tty.c:1741
Read of size 1 at addr ffff8880089e40e9 by task syz-executor.1/13184

CPU: 0 PID: 13184 Comm: syz-executor.1 Not tainted 5.4.7 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Call Trace:
...
 kasan_report+0xe/0x20 mm/kasan/common.c:634
 n_tty_receive_buf_common+0x2481/0x2940 drivers/tty/n_tty.c:1741
 tty_ldisc_receive_buf+0xac/0x190 drivers/tty/tty_buffer.c:461
 paste_selection+0x297/0x400 drivers/tty/vt/selection.c:372
 tioclinux+0x20d/0x4e0 drivers/tty/vt/vt.c:3044
 vt_ioctl+0x1bcf/0x28d0 drivers/tty/vt/vt_ioctl.c:364
 tty_ioctl+0x525/0x15a0 drivers/tty/tty_io.c:2657
 vfs_ioctl fs/ioctl.c:47 [inline]

It is due to a race between parallel paste_selection (TIOCL_PASTESEL)
and set_selection_user (TIOCL_SETSEL) invocations. One uses sel_buffer,
while the other frees it and reallocates a new one for another
selection. Add a mutex to close this race.

The mutex takes care properly of sel_buffer and sel_buffer_lth only. The
other selection global variables (like sel_start, sel_end, and sel_cons)
are protected only in set_selection_user. The other functions need quite
some more work to close the races of the variables there. This is going
to happen later.

This likely fixes (I am unsure as there is no reproducer provided) bug
206361 too. It was marked as CVE-2020-8648.

Signed-off-by: Jiri Slaby 
Reported-by: syzbot+59997e8d5cbdc486e6f6@syzkaller.appspotmail.com
References: https://bugzilla.kernel.org/show_bug.cgi?id=206361
Cc: stable 
Link: https://lore.kernel.org/r/20200210081131.23572-2-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman

vt: selection, handle pending signals in paste_selection

2020-02-13T20:10:07+00:00

When pasting a selection to a vt, the task is set as INTERRUPTIBLE while
waiting for a tty to unthrottle. But signals are not handled at all.
Normally, this is not a problem as tty_ldisc_receive_buf receives all
the goods and a user has no reason to interrupt the task.

There are two scenarios where this matters:
1) when the tty is throttled and a signal is sent to the process, it
   spins on a CPU until the tty is unthrottled. schedule() does not
   really echedule, but returns immediately, of course.
2) when the sel_buffer becomes invalid, KASAN prevents any reads from it
   and the loop simply does not proceed and spins forever (causing the
   tty to throttle, but the code never sleeps, the same as above). This
   sometimes happens as there is a race in the sel_buffer handling code.

So add signal handling to this ioctl (TIOCL_PASTESEL) and return -EINTR
in case a signal is pending.

Signed-off-by: Jiri Slaby 
Cc: stable 
Link: https://lore.kernel.org/r/20200210081131.23572-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman

vt: vt_ioctl: fix race in VT_RESIZEX

2020-02-12T19:53:23+00:00

We need to make sure vc_cons[i].d is not NULL after grabbing
console_lock(), or risk a crash.

general protection fault, probably for non-canonical address 0xdffffc0000000068: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000340-0x0000000000000347]
CPU: 1 PID: 19462 Comm: syz-executor.5 Not tainted 5.5.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:vt_ioctl+0x1f96/0x26d0 drivers/tty/vt/vt_ioctl.c:883
Code: 74 41 e8 bd a6 84 fd 48 89 d8 48 c1 e8 03 42 80 3c 28 00 0f 85 e4 04 00 00 48 8b 03 48 8d b8 40 03 00 00 48 89 fa 48 c1 ea 03 <42> 0f b6 14 2a 84 d2 74 09 80 fa 03 0f 8e b1 05 00 00 44 89 b8 40
RSP: 0018:ffffc900086d7bb0 EFLAGS: 00010202
RAX: 0000000000000000 RBX: ffffffff8c34ee88 RCX: ffffc9001415c000
RDX: 0000000000000068 RSI: ffffffff83f0e6e3 RDI: 0000000000000340
RBP: ffffc900086d7cd0 R08: ffff888054ce0100 R09: fffffbfff16a2f6d
R10: ffff888054ce0998 R11: ffff888054ce0100 R12: 000000000000001d
R13: dffffc0000000000 R14: 1ffff920010daf79 R15: 000000000000ff7f
FS:  00007f7d13c12700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffd477e3c38 CR3: 0000000095d0a000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 tty_ioctl+0xa37/0x14f0 drivers/tty/tty_io.c:2660
 vfs_ioctl fs/ioctl.c:47 [inline]
 ksys_ioctl+0x123/0x180 fs/ioctl.c:763
 __do_sys_ioctl fs/ioctl.c:772 [inline]
 __se_sys_ioctl fs/ioctl.c:770 [inline]
 __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:770
 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x45b399
Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f7d13c11c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007f7d13c126d4 RCX: 000000000045b399
RDX: 0000000020000080 RSI: 000000000000560a RDI: 0000000000000003
RBP: 000000000075bf20 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 0000000000000666 R14: 00000000004c7f04 R15: 000000000075bf2c
Modules linked in:
---[ end trace 80970faf7a67eb77 ]---
RIP: 0010:vt_ioctl+0x1f96/0x26d0 drivers/tty/vt/vt_ioctl.c:883
Code: 74 41 e8 bd a6 84 fd 48 89 d8 48 c1 e8 03 42 80 3c 28 00 0f 85 e4 04 00 00 48 8b 03 48 8d b8 40 03 00 00 48 89 fa 48 c1 ea 03 <42> 0f b6 14 2a 84 d2 74 09 80 fa 03 0f 8e b1 05 00 00 44 89 b8 40
RSP: 0018:ffffc900086d7bb0 EFLAGS: 00010202
RAX: 0000000000000000 RBX: ffffffff8c34ee88 RCX: ffffc9001415c000
RDX: 0000000000000068 RSI: ffffffff83f0e6e3 RDI: 0000000000000340
RBP: ffffc900086d7cd0 R08: ffff888054ce0100 R09: fffffbfff16a2f6d
R10: ffff888054ce0998 R11: ffff888054ce0100 R12: 000000000000001d
R13: dffffc0000000000 R14: 1ffff920010daf79 R15: 000000000000ff7f
FS:  00007f7d13c12700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffd477e3c38 CR3: 0000000095d0a000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet 
Cc: stable 
Reported-by: syzbot 
Link: https://lore.kernel.org/r/20200210190721.200418-1-edumazet@google.com
Signed-off-by: Greg Kroah-Hartman

vt: fix scrollback flushing on background consoles

2020-02-10T21:51:44+00:00

Commit a6dbe4427559 ("vt: perform safe console erase in the right
order") provided fixes to an earlier commit by gathering all console
scrollback flushing operations in a function of its own. This includes
the invocation of vc_sw->con_switch() as previously done through a
update_screen() call. That commit failed to carry over the
con_is_visible() conditional though, as well as cursor handling, which
caused problems when "\e[3J" was written to a background console.

One could argue for preserving the call to update_screen(). However
this does far more than we need, and it is best to remove scrollback
assumptions from it. Instead let's gather the minimum needed to actually
perform scrollback flushing properly in that one place.

While at it, let's document the vc_sw->con_switch() side effect being
relied upon.

Signed-off-by: Nicolas Pitre 
Reported-and-tested-by: Lukas Wunner 
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/nycvar.YSQ.7.76.2001281205560.1655@knanqh.ubzr
Signed-off-by: Greg Kroah-Hartman

kbuild: rename hostprogs-y/always to hostprogs/always-y

2020-02-03T16:53:07+00:00

In old days, the "host-progs" syntax was used for specifying host
programs. It was renamed to the current "hostprogs-y" in 2004.

It is typically useful in scripts/Makefile because it allows Kbuild to
selectively compile host programs based on the kernel configuration.

This commit renames like follows:

  always       ->  always-y
  hostprogs-y  ->  hostprogs

So, scripts/Makefile will look like this:

  always-$(CONFIG_BUILD_BIN2C) += ...
  always-$(CONFIG_KALLSYMS)    += ...
      ...
  hostprogs := $(always-y) $(always-m)

I think this makes more sense because a host program is always a host
program, irrespective of the kernel configuration. We want to specify
which ones to compile by CONFIG options, so always-y will be handier.

The "always", "hostprogs-y", "hostprogs-m" will be kept for backward
compatibility for a while.

Signed-off-by: Masahiro Yamada

vt: Correct comment documenting do_take_over_console()

2020-01-14T15:00:54+00:00

Commit 3e795de7631b ("[PATCH] VT binding: Add binding/unbinding support
for the VT console") introduced a code comment claiming that
"do_take_over_console is basically a register followed by unbind".

However the function actually performs a register followed by *bind*.

Signed-off-by: Lukas Wunner 
Cc: Antonino A. Daplas 
Link: https://lore.kernel.org/r/a500f005ba7013ca8165a6d42f59b2183d56114f.1578574427.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman

vt: Delete comment referencing non-existent unbind_con_driver()

2020-01-14T15:00:54+00:00

Commit c1f5e38a5d35 ("vt: delete unneeded function unbind_con_driver")
removed unbind_con_driver() but retained a comment referencing the
function.  Delete it.

Signed-off-by: Lukas Wunner 
Cc: Wang YanQing 
Link: https://lore.kernel.org/r/4d77a67d77a1c699e9a6cc3e73044c31c02d60b5.1578574427.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman

vt: Initialize conswitchp to dummy_con if unset

2020-01-14T14:29:15+00:00

If the arch setup code hasn't initialized conswitchp yet, set it to
dummy_con in con_init. This will allow us to drop the dummy_con
initialization that's done in almost every architecture.

Signed-off-by: Arvind Sankar 
Link: https://lore.kernel.org/r/20191218214506.49252-3-nivedita@alum.mit.edu
Signed-off-by: Greg Kroah-Hartman