linux-toradex.git/drivers/tty, branch v3.10.9

serial/mxs-auart: increase time to wait for transmitter to become idle

2013-08-12T01:35:21+00:00

commit 079a036f4283e2b0e5c26080b8c5112bc0cc1831 upstream.

Without this patch the driver waits ~1 ms for the UART to become idle. At
115200n8 this time is (theoretically) enough to transfer 11.5 characters
(= 115200 bits/s / (10 Bits/char) * 1ms). As the mxs-auart has a fifo size
of 16 characters the clock is gated too early. The problem is worse for
lower baud rates.

This only happens to really shut down the transmitter in the middle of a
transfer if /dev/ttyAPPx isn't opened in userspace (e.g. by a getty) but
was at least once (because the bootloader doesn't disable the transmitter).

So increase the timeout to 20 ms which should be enough for 9600n8, too.
Moreover skip gating the clock if the timeout is elapsed.

Signed-off-by: Uwe Kleine-König 
Signed-off-by: Greg Kroah-Hartman

serial: arc_uart: Fix module alias

2013-08-12T01:35:21+00:00

commit d5a12ea7a9e58d9e5c19d25cb668aadb396423ec upstream.

Platform drivers use "platform:" prefix in module alias.
Also use DRIVER_NAME in MODULE_ALIAS to make module autoloading work.

Signed-off-by: Axel Lin 
Acked-by: Vineet Gupta 
Signed-off-by: Greg Kroah-Hartman

serial/mxs-auart: fix race condition in interrupt handler

2013-08-12T01:35:21+00:00

commit d970d7fe65adff5efe75b4a73c4ffc9be57089f7 upstream.

The handler needs to ack the pending events before actually handling them.
Otherwise a new event might come in after it it considered non-pending or
handled and is acked then without being handled. So this event is only
noticed when the next interrupt happens.

Without this patch an i.MX28 based machine running an rt-patched kernel
regularly hangs during boot.

Signed-off-by: Uwe Kleine-König 
Signed-off-by: Greg Kroah-Hartman

parisc: Fix interrupt routing for C8000 serial ports

2013-08-12T01:35:21+00:00

commit dd5e6d6a3db09b16b7c222943977865eead88cc3 upstream.

We can't use dev->mod_index for selecting the interrupt routing entry,
because it's not an index into interrupt routing table. It will be even
wrong on a machine with 2 CPUs (4 cores). But all needed information is
contained in the PAT entries for the serial ports. mod[0] contains the
iosapic address and mod_info has some indications for the interrupt
input (at least it looks like it). This patch implements the searching
for the right iosapic and uses this interrupt input information.

Signed-off-by: Thomas Bogendoerfer 
Signed-off-by: Helge Deller 
Signed-off-by: Greg Kroah-Hartman

tty_port: Fix refcounting leak in tty_port_tty_hangup()

2013-08-04T08:51:14+00:00

commit 1d9e689c934bd5ecb0f273c6c65e0655c5cfee5f upstream.

The function tty_port_tty_hangup() could leak a reference to the tty_struct:

        struct tty_struct *tty = tty_port_tty_get(port);

        if (tty && (!check_clocal || !C_CLOCAL(tty))) {
                tty_hangup(tty);
                tty_kref_put(tty);
        }

If tty != NULL and the second condition is false we never call tty_kref_put and
the reference is leaked.

Fix by always calling tty_kref_put() which accepts a NULL argument.

The patch fixes a regression introduced by commit aa27a094.

Acked-by: Gustavo Padovan 
Signed-off-by: Gianluca Anzolin 
Acked-by: Jiri Slaby 
Signed-off-by: Greg Kroah-Hartman

pch_uart: Add uart_clk selection for the MinnowBoard

2013-07-22T01:21:23+00:00

commit 29692d05647cb7ecea56242241f77291d5624b95 upstream.

Use DMI_BOARD_NAME to determine if we are running on a MinnowBoard and
set the uart clock to 50MHz if so. This removes the need to pass the
user_uartclk to the kernel at boot time.

Signed-off-by: Darren Hart 
Cc: Jiri Slaby 
Cc: "H. Peter Anvin" 
Cc: Peter Waskiewicz 
Cc: Andy Shevchenko 
Signed-off-by: Greg Kroah-Hartman

Revert "serial: 8250_pci: add support for another kind of NetMos Technology PCI 9835 Multi-I/O Controller"

2013-07-13T18:42:26+00:00

commit 828c6a102b1f2b8583fadc0e779c46b31d448f0b upstream.

This reverts commit 8d2f8cd424ca0b99001f3ff4f5db87c4e525f366.

As reported by Stefan, this device already works with the parport_serial
driver, so the 8250_pci driver should not also try to grab it as well.

Reported-by: Stefan Seyfried 
Cc: Wang YanQing 
Signed-off-by: Greg Kroah-Hartman

tty: Reset itty for other pty

2013-07-13T18:42:26+00:00

commit 64e377dcd7d75c241d614458e9619d3445de44ef upstream.

Commit 19ffd68f816878aed456d5e87697f43bd9e3bd2b
('pty: Remove redundant itty reset') introduced a regression
whereby the other pty's linkage is not cleared on teardown.
This triggers a false positive diagnostic in testing.

Properly reset the itty linkage.

Signed-off-by: Peter Hurley 
Signed-off-by: Greg Kroah-Hartman

Merge tag 'tty-3.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2013-06-22T19:00:28+00:00

Pul tty fixes from Greg Kroah-Hartman:
 "Here are two tty core fixes that resolve some regressions that have
  been reported recently.  Both tiny fixes, but needed"

* tag 'tty-3.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: Fix transient pty write() EIO
  tty/vt: Return EBUSY if deallocating VT1 and it is busy

parisc: fix serial ports on C8000 workstation

2013-06-18T18:29:07+00:00

The C8000 workstation (64 bit kernel only) has a somewhat different
serial port configuration than other models.
Thomas Bogendoerfer sent a patch to fix this in September 2010, which
was now minimally modified by me.

Signed-off-by: Thomas Bogendoerfer 
Signed-off-by: Helge Deller