linux-toradex.git/drivers/tty, branch v3.14.57 Linux kernel for Apalis and Colibri modules serial: 8250_pci: Add support for 12 port Exar boards 2015-11-09T20:50:26+00:00 Soeren Grunewald soeren.grunewald@desy.de 2015-06-11T07:25:04+00:00 e7a10d9297c1abfd27138d86a13f7b6435634a46 commit be32c0cf0462c36f482b5ddcff1d8371be1e183c upstream. The Exar XR17V358 can also be combined with a XR17V354 chip to act as a single 12 port chip. This works the same way as the combining two XR17V358 chips. But the reported device id then is 0x4358. Signed-off-by: Soeren Grunewald <soeren.grunewald@desy.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit be32c0cf0462c36f482b5ddcff1d8371be1e183c upstream.

The Exar XR17V358 can also be combined with a XR17V354 chip to act as a
single 12 port chip. This works the same way as the combining two XR17V358
chips. But the reported device id then is 0x4358.

Signed-off-by: Soeren Grunewald <soeren.grunewald@desy.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: 8250_pci: Add support for 16 port Exar boards 2015-11-09T20:50:26+00:00 Soeren Grunewald soeren.grunewald@desy.de 2015-04-28T14:29:49+00:00 8843ae25ac43ed45159984c08ed4dd14cca7349c commit 96a5d18bc1338786fecac73599f1681f59a59a8e upstream. The Exar XR17V358 chip usually provides only 8 ports. But two chips can be combined to act as a single 16 port chip. Therefor one chip is configured as master the second as slave by connecting the mode pin to VCC (master) or GND (slave). Then the master chip is reporting a different device-id depending on whether a slave is detected or not. The UARTs 8-15 are addressed from 0x2000-0x3fff. So the offset of 0x400 from UART to UART can be used to address all 16 ports as before. See: https://www.exar.com/common/content/document.ashx?id=1587 page 11 Signed-off-by: Soeren Grunewald <soeren.grunewald@desy.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 96a5d18bc1338786fecac73599f1681f59a59a8e upstream.

The Exar XR17V358 chip usually provides only 8 ports. But two chips can be
combined to act as a single 16 port chip. Therefor one chip is configured
as master the second as slave by connecting the mode pin to VCC (master)
or GND (slave).

Then the master chip is reporting a different device-id depending on
whether a slave is detected or not. The UARTs 8-15 are addressed from
0x2000-0x3fff. So the offset of 0x400 from UART to UART can be used to
address all 16 ports as before.

See: https://www.exar.com/common/content/document.ashx?id=1587 page 11

Signed-off-by: Soeren Grunewald <soeren.grunewald@desy.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tty/vt: don't set font mappings on vc not supporting this 2015-09-21T17:02:21+00:00 Imre Deak imre.deak@intel.com 2014-10-02T13:34:31+00:00 8af4352278c88da800df901e80a99dccc583cf56 commit 9e326f78713a4421fe11afc2ddeac07698fac131 upstream. We can call this function for a dummy console that doesn't support setting the font mapping, which will result in a null ptr BUG. So check for this case and return error for consoles w/o font mapping support. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=59321 Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 9e326f78713a4421fe11afc2ddeac07698fac131 upstream.

We can call this function for a dummy console that doesn't support
setting the font mapping, which will result in a null ptr BUG. So check
for this case and return error for consoles w/o font mapping support.

Reference: https://bugzilla.kernel.org/show_bug.cgi?id=59321
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: 8250: don't bind to SMSC IrCC IR port 2015-09-21T17:02:18+00:00 Maciej S. Szmigiero mail@maciej.szmigiero.name 2015-08-02T21:11:52+00:00 4d025a21c7e6c3262ed9a093227df8d4c9a937d6 commit ffa34de03bcfbfa88d8352942bc238bb48e94e2d upstream. SMSC IrCC SIR/FIR port should not be bound to by (legacy) serial driver so its own driver (smsc-ircc2) can bind to it. Signed-off-by: Maciej Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ffa34de03bcfbfa88d8352942bc238bb48e94e2d upstream.

SMSC IrCC SIR/FIR port should not be bound to by
(legacy) serial driver so its own driver (smsc-ircc2)
can bind to it.

Signed-off-by: Maciej Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: imx: Fix DMA handling for IDLE condition aborts 2015-06-23T00:01:23+00:00 Philipp Zabel p.zabel@pengutronix.de 2015-05-19T08:54:09+00:00 bb6060654459407ca7bf656456a178f40cbf1f7a commit 392bceedb107a3dc1d4287e63d7670d08f702feb upstream. The driver configures the IDLE condition to interrupt the SDMA engine. Since the SDMA UART ROM script doesn't clear the IDLE bit itself, this caused repeated 1-byte DMA transfers, regardless of available data in the RX FIFO. Also, when returning due to the IDLE condition, the UART ROM script already increased its counter, causing residue to be off by one. This patch clears the IDLE condition to avoid repeated 1-byte DMA transfers and decreases count by when the DMA transfer was aborted due to the IDLE condition, fixing serial transfers using DMA on i.MX6Q. Reported-by: Peter Seiderer <ps.report@gmx.net> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 392bceedb107a3dc1d4287e63d7670d08f702feb upstream.

The driver configures the IDLE condition to interrupt the SDMA engine.
Since the SDMA UART ROM script doesn't clear the IDLE bit itself, this
caused repeated 1-byte DMA transfers, regardless of available data in the
RX FIFO. Also, when returning due to the IDLE condition, the UART ROM
script already increased its counter, causing residue to be off by one.

This patch clears the IDLE condition to avoid repeated 1-byte DMA transfers
and decreases count by when the DMA transfer was aborted due to the IDLE
condition, fixing serial transfers using DMA on i.MX6Q.

Reported-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
n_tty: Fix auditing support for cannonical mode 2015-06-23T00:01:19+00:00 Laura Abbott labbott@fedoraproject.org 2015-05-14T18:42:17+00:00 3bb76d57f40a3d086b386c26e4340ba3017fd471 commit 72586c6061ab8c23ffd9f301ed19782a44ff5f04 upstream. Commit 32f13521ca68bc624ff6effc77f308a52b038bf0 ("n_tty: Line copy to user buffer in canonical mode") changed cannonical mode copying to use copy_to_user but missed adding the call to the audit framework. Add in the appropriate functions to get audit support. Fixes: 32f13521ca68 ("n_tty: Line copy to user buffer in canonical mode") Reported-by: Miloslav Trmač <mitr@redhat.com> Signed-off-by: Laura Abbott <labbott@fedoraproject.org> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 72586c6061ab8c23ffd9f301ed19782a44ff5f04 upstream.

Commit 32f13521ca68bc624ff6effc77f308a52b038bf0
("n_tty: Line copy to user buffer in canonical mode")
changed cannonical mode copying to use copy_to_user
but missed adding the call to the audit framework.
Add in the appropriate functions to get audit support.

Fixes: 32f13521ca68 ("n_tty: Line copy to user buffer in canonical mode")
Reported-by: Miloslav Trmač <mitr@redhat.com>
Signed-off-by: Laura Abbott <labbott@fedoraproject.org>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tty/n_gsm.c: fix a memory leak when gsmtty is removed 2015-06-06T15:19:35+00:00 Pan Xinhui xinhuix.pan@intel.com 2015-03-28T02:42:56+00:00 ad34c79b5fda56d036ce3274f286a454887d76cc commit 8f9cfeed3eae86c70d3b04445a6f2036b27b6304 upstream. when gsmtty_remove put dlci, it will cause memory leak if dlci->port's refcount is zero. So we do the cleanup work in .cleanup callback instead. dlci will be last put in two call chains. 1) gsmld_close -> gsm_cleanup_mux -> gsm_dlci_release -> dlci_put 2) gsmld_remove -> dlci_put so there is a race. the memory leak depends on the race. In call chain 2. we hit the memory leak. below comment tells. release_tty -> tty_driver_remove_tty -> gsmtty_remove -> dlci_put -> tty_port_destructor (WARN_ON(port->itty) and return directly) | tty->port->itty = NULL; | tty_kref_put ---> release_one_tty -> gsmtty_cleanup (added by our patch) So our patch fix the memory leak by doing the cleanup work after tty core did. Signed-off-by: Pan Xinhui <xinhuix.pan@intel.com> Fixes: dfabf7ffa30585 Acked-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8f9cfeed3eae86c70d3b04445a6f2036b27b6304 upstream.

when gsmtty_remove put dlci, it will cause memory leak if dlci->port's refcount is zero.
So we do the cleanup work in .cleanup callback instead.

dlci will be last put in two call chains.
1) gsmld_close -> gsm_cleanup_mux -> gsm_dlci_release -> dlci_put
2) gsmld_remove -> dlci_put
so there is a race. the memory leak depends on the race.

In call chain 2. we hit the memory leak. below comment tells.

release_tty -> tty_driver_remove_tty -> gsmtty_remove -> dlci_put -> tty_port_destructor (WARN_ON(port->itty) and return directly)
                         |
                tty->port->itty = NULL;
                         |
                tty_kref_put ---> release_one_tty -> gsmtty_cleanup (added by our patch)

So our patch fix the memory leak by doing the cleanup work after tty core did.

Signed-off-by: Pan Xinhui <xinhuix.pan@intel.com>
Fixes: dfabf7ffa30585
Acked-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xen/events: don't bind non-percpu VIRQs with percpu chip 2015-06-06T15:19:32+00:00 David Vrabel david.vrabel@citrix.com 2015-05-19T17:40:49+00:00 8d3cbb90968e6fc0114b6666d393ad968eaeb16a commit 77bb3dfdc0d554befad58fdefbc41be5bc3ed38a upstream. A non-percpu VIRQ (e.g., VIRQ_CONSOLE) may be freed on a different VCPU than it is bound to. This can result in a race between handle_percpu_irq() and removing the action in __free_irq() because handle_percpu_irq() does not take desc->lock. The interrupt handler sees a NULL action and oopses. Only use the percpu chip/handler for per-CPU VIRQs (like VIRQ_TIMER). # cat /proc/interrupts | grep virq 40: 87246 0 xen-percpu-virq timer0 44: 0 0 xen-percpu-virq debug0 47: 0 20995 xen-percpu-virq timer1 51: 0 0 xen-percpu-virq debug1 69: 0 0 xen-dyn-virq xen-pcpu 74: 0 0 xen-dyn-virq mce 75: 29 0 xen-dyn-virq hvc_console Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 77bb3dfdc0d554befad58fdefbc41be5bc3ed38a upstream.

A non-percpu VIRQ (e.g., VIRQ_CONSOLE) may be freed on a different
VCPU than it is bound to.  This can result in a race between
handle_percpu_irq() and removing the action in __free_irq() because
handle_percpu_irq() does not take desc->lock.  The interrupt handler
sees a NULL action and oopses.

Only use the percpu chip/handler for per-CPU VIRQs (like VIRQ_TIMER).

  # cat /proc/interrupts | grep virq
   40:      87246          0  xen-percpu-virq      timer0
   44:          0          0  xen-percpu-virq      debug0
   47:          0      20995  xen-percpu-virq      timer1
   51:          0          0  xen-percpu-virq      debug1
   69:          0          0   xen-dyn-virq      xen-pcpu
   74:          0          0   xen-dyn-virq      mce
   75:         29          0   xen-dyn-virq      hvc_console

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xen/console: Update console event channel on resume 2015-05-17T16:53:49+00:00 Boris Ostrovsky boris.ostrovsky@oracle.com 2015-04-29T21:10:14+00:00 9965d51efbd5a9cd6fa833d2839b4b80d78fa7df commit b9d934f27c91b878c4b2e64299d6e419a4022f8d upstream. After a resume the hypervisor/tools may change console event channel number. We should re-query it. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b9d934f27c91b878c4b2e64299d6e419a4022f8d upstream.

After a resume the hypervisor/tools may change console event
channel number. We should re-query it.

Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tty/serial: at91: maxburst was missing for dma transfers 2015-05-13T12:16:57+00:00 Ludovic Desroches ludovic.desroches@atmel.com 2015-04-16T14:58:12+00:00 48ff72850c4faaa4a156c7f71a292eac0acd030d commit a8d4e01637902311c5643b69a5c80e2805f04054 upstream. Maxburst was not set when doing the dma slave configuration. This value is checked by the recently introduced xdmac. It causes an error when doing the slave configuration and so prevents from using dma. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a8d4e01637902311c5643b69a5c80e2805f04054 upstream.

Maxburst was not set when doing the dma slave configuration. This value
is checked by the recently introduced xdmac. It causes an error when
doing the slave configuration and so prevents from using dma.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>