linux-toradex.git/drivers/tty, branch v4.9.125

serial: 8250_dw: Add ACPI support for uart on Broadcom SoC

2018-08-22T05:47:15+00:00

commit 784c29eda5b4e28c3a56aa90b3815f9a1b0cfdc1 upstream.

Add ACPI identifier HID for UART DW 8250 on Broadcom SoCs
to match the HID passed through ACPI tables to enable
UART controller.

Signed-off-by: Srinath Mannam 
Reviewed-by: Vladimir Olovyannikov 
Tested-by: Vladimir Olovyannikov 
Reviewed-by: Andy Shevchenko 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Greg Kroah-Hartman

serial: 8250_dw: always set baud rate in dw8250_set_termios

2018-08-22T05:47:15+00:00

commit dfcab6ba573445c703235ab6c83758eec12d7f28 upstream.

dw8250_set_termios() doesn't set baud rate if the arg "old ktermios" is
NULL. This happens during resume.
Call Trace:
...
[   54.928108] dw8250_set_termios+0x162/0x170
[   54.928114] serial8250_set_termios+0x17/0x20
[   54.928117] uart_change_speed+0x64/0x160
[   54.928119] uart_resume_port
...

So the baud rate is not restored after S3 and breaks the apps who use
UART, for example, console and bluetooth etc.

We address this issue by setting the baud rate irrespective of arg
"old", just like the drivers for other 8250 IPs. This is tested with
Intel Broxton platform.

Signed-off-by: Chen Hu 
Fixes: 4e26b134bd17 ("serial: 8250_dw: clock rate handling for all ACPI platforms")
Cc: Heikki Krogerus 
Cc: stable 
Reviewed-by: Andy Shevchenko 
Signed-off-by: Greg Kroah-Hartman

tty: serial: 8250: Revert NXP SC16C2552 workaround

2018-08-22T05:47:15+00:00

commit 47ac76662ca9c5852fd353093f19de3ae85f2e66 upstream.

Revert commit ecb988a3b7985913d1f0112f66667cdd15e40711: tty: serial:
8250: 8250_core: NXP SC16C2552 workaround

The above commit causes userland application to no longer write
correctly its first write to a dumb terminal connected to /dev/ttyS0.
This commit seems to be the culprit. It's as though the TX FIFO is being
reset during that write. What should be displayed is:

PSW 80000000 INST 00000000                           HALT
//

What is displayed is some variation of:

T 00000000           HAL//

Reverting this commit via this patch fixes my problem.

Signed-off-by: Mark Hounschell 
Fixes: ecb988a3b798 ("tty: serial: 8250: 8250_core: NXP SC16C2552 workaround")
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

tty: Fix data race in tty_insert_flip_string_fixed_flag

2018-08-03T05:55:22+00:00

[ Upstream commit b6da31b2c07c46f2dcad1d86caa835227a16d9ff ]

Unlike normal serials, in pty layer, there is no guarantee that multiple
threads don't insert input characters at the same time. If it is happened,
tty_insert_flip_string_fixed_flag can be executed concurrently. This can
lead slab out-of-bounds write in tty_insert_flip_string_fixed_flag.

Call sequences are as follows.
CPU0                                    CPU1
n_tty_ioctl_helper                      n_tty_ioctl_helper
__start_tty                             tty_send_xchar
tty_wakeup                              pty_write
n_hdlc_tty_wakeup                       tty_insert_flip_string
n_hdlc_send_frames                      tty_insert_flip_string_fixed_flag
pty_write
tty_insert_flip_string
tty_insert_flip_string_fixed_flag

To fix the race, acquire port->lock in pty_write() before it inserts input
characters to tty buffer. It prevents multiple threads from inserting
input characters concurrently.

The crash log is as follows:
BUG: KASAN: slab-out-of-bounds in tty_insert_flip_string_fixed_flag+0xb5/
0x130 drivers/tty/tty_buffer.c:316 at addr ffff880114fcc121
Write of size 1792 by task syz-executor0/30017
CPU: 1 PID: 30017 Comm: syz-executor0 Not tainted 4.8.0 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014
 0000000000000000 ffff88011638f888 ffffffff81694cc3 ffff88007d802140
 ffff880114fcb300 ffff880114fcc300 ffff880114fcb300 ffff88011638f8b0
 ffffffff8130075c ffff88011638f940 ffff88007d802140 ffff880194fcc121
Call Trace:
 __dump_stack lib/dump_stack.c:15 [inline]
 dump_stack+0xb3/0x110 lib/dump_stack.c:51
 kasan_object_err+0x1c/0x70 mm/kasan/report.c:156
 print_address_description mm/kasan/report.c:194 [inline]
 kasan_report_error+0x1f7/0x4e0 mm/kasan/report.c:283
 kasan_report+0x36/0x40 mm/kasan/report.c:303
 check_memory_region_inline mm/kasan/kasan.c:292 [inline]
 check_memory_region+0x13e/0x1a0 mm/kasan/kasan.c:299
 memcpy+0x37/0x50 mm/kasan/kasan.c:335
 tty_insert_flip_string_fixed_flag+0xb5/0x130 drivers/tty/tty_buffer.c:316
 tty_insert_flip_string include/linux/tty_flip.h:35 [inline]
 pty_write+0x7f/0xc0 drivers/tty/pty.c:115
 n_hdlc_send_frames+0x1d4/0x3b0 drivers/tty/n_hdlc.c:419
 n_hdlc_tty_wakeup+0x73/0xa0 drivers/tty/n_hdlc.c:496
 tty_wakeup+0x92/0xb0 drivers/tty/tty_io.c:601
 __start_tty.part.26+0x66/0x70 drivers/tty/tty_io.c:1018
 __start_tty+0x34/0x40 drivers/tty/tty_io.c:1013
 n_tty_ioctl_helper+0x146/0x1e0 drivers/tty/tty_ioctl.c:1138
 n_hdlc_tty_ioctl+0xb3/0x2b0 drivers/tty/n_hdlc.c:794
 tty_ioctl+0xa85/0x16d0 drivers/tty/tty_io.c:2992
 vfs_ioctl fs/ioctl.c:43 [inline]
 do_vfs_ioctl+0x13e/0xba0 fs/ioctl.c:679
 SYSC_ioctl fs/ioctl.c:694 [inline]
 SyS_ioctl+0x8f/0xc0 fs/ioctl.c:685
 entry_SYSCALL_64_fastpath+0x1f/0xbd

Signed-off-by: DaeRyong Jeong 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

hvc_opal: don't set tb_ticks_per_usec in udbg_init_opal_common()

2018-08-03T05:55:14+00:00

[ Upstream commit 447808bf500a7cc92173266a59f8a494e132b122 ]

time_init() will set up tb_ticks_per_usec based on reality.
time_init() is called *after* udbg_init_opal_common() during boot.

from arch/powerpc/kernel/time.c:
  unsigned long tb_ticks_per_usec = 100; /* sane default */

Currently, all powernv systems have a timebase frequency of 512mhz
(512000000/1000000 == 0x200) - although there's nothing written
down anywhere that I can find saying that we couldn't make that
different based on the requirements in the ISA.

So, we've been (accidentally) thwacking the (currently) correct
(for powernv at least) value for tb_ticks_per_usec earlier than
we otherwise would have.

The "sane default" seems to be adequate for our purposes between
udbg_init_opal_common() and time_init() being called, and if it isn't,
then we should probably be setting it somewhere that isn't hvc_opal.c!

Signed-off-by: Stewart Smith 
Signed-off-by: Michael Ellerman 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

vt: prevent leaking uninitialized data to userspace via /dev/vcs*

2018-07-11T14:26:42+00:00

commit 21eff69aaaa0e766ca0ce445b477698dc6a9f55a upstream.

KMSAN reported an infoleak when reading from /dev/vcs*:

  BUG: KMSAN: kernel-infoleak in vcs_read+0x18ba/0x1cc0
  Call Trace:
  ...
   kmsan_copy_to_user+0x7a/0x160 mm/kmsan/kmsan.c:1253
   copy_to_user ./include/linux/uaccess.h:184
   vcs_read+0x18ba/0x1cc0 drivers/tty/vt/vc_screen.c:352
   __vfs_read+0x1b2/0x9d0 fs/read_write.c:416
   vfs_read+0x36c/0x6b0 fs/read_write.c:452
  ...
  Uninit was created at:
   kmsan_save_stack_with_flags mm/kmsan/kmsan.c:279
   kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:189
   kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:315
   __kmalloc+0x13a/0x350 mm/slub.c:3818
   kmalloc ./include/linux/slab.h:517
   vc_allocate+0x438/0x800 drivers/tty/vt/vt.c:787
   con_install+0x8c/0x640 drivers/tty/vt/vt.c:2880
   tty_driver_install_tty drivers/tty/tty_io.c:1224
   tty_init_dev+0x1b5/0x1020 drivers/tty/tty_io.c:1324
   tty_open_by_driver drivers/tty/tty_io.c:1959
   tty_open+0x17b4/0x2ed0 drivers/tty/tty_io.c:2007
   chrdev_open+0xc25/0xd90 fs/char_dev.c:417
   do_dentry_open+0xccc/0x1440 fs/open.c:794
   vfs_open+0x1b6/0x2f0 fs/open.c:908
  ...
  Bytes 0-79 of 240 are uninitialized

Consistently allocating |vc_screenbuf| with kzalloc() fixes the problem

Reported-by: syzbot+17a8efdf800000@syzkaller.appspotmail.com
Signed-off-by: Alexander Potapenko 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

n_tty: Access echo_* variables carefully.

2018-07-11T14:26:41+00:00

commit ebec3f8f5271139df618ebdf8427e24ba102ba94 upstream.

syzbot is reporting stalls at __process_echoes() [1]. This is because
since ldata->echo_commit < ldata->echo_tail becomes true for some reason,
the discard loop is serving as almost infinite loop. This patch tries to
avoid falling into ldata->echo_commit < ldata->echo_tail situation by
making access to echo_* variables more carefully.

Since reset_buffer_flags() is called without output_lock held, it should
not touch echo_* variables. And omit a call to reset_buffer_flags() from
n_tty_open() by using vzalloc().

Since add_echo_byte() is called without output_lock held, it needs memory
barrier between storing into echo_buf[] and incrementing echo_head counter.
echo_buf() needs corresponding memory barrier before reading echo_buf[].
Lack of handling the possibility of not-yet-stored multi-byte operation
might be the reason of falling into ldata->echo_commit < ldata->echo_tail
situation, for if I do WARN_ON(ldata->echo_commit == tail + 1) prior to
echo_buf(ldata, tail + 1), the WARN_ON() fires.

Also, explicitly masking with buffer for the former "while" loop, and
use ldata->echo_commit > tail for the latter "while" loop.

[1] https://syzkaller.appspot.com/bug?id=17f23b094cd80df750e5b0f8982c521ee6bcbf40

Signed-off-by: Tetsuo Handa 
Reported-by: syzbot 
Cc: Peter Hurley 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

n_tty: Fix stall at n_tty_receive_char_special().

2018-07-11T14:26:41+00:00

commit 3d63b7e4ae0dc5e02d28ddd2fa1f945defc68d81 upstream.

syzbot is reporting stalls at n_tty_receive_char_special() [1]. This is
because comparison is not working as expected since ldata->read_head can
change at any moment. Mitigate this by explicitly masking with buffer size
when checking condition for "while" loops.

[1] https://syzkaller.appspot.com/bug?id=3d7481a346958d9469bebbeb0537d5f056bdd6e8

Signed-off-by: Tetsuo Handa 
Reported-by: syzbot 
Fixes: bc5a5e3f45d04784 ("n_tty: Don't wrap input buffer indices at buffer size")
Cc: stable 
Cc: Peter Hurley 
Signed-off-by: Greg Kroah-Hartman

serial: sh-sci: Use spin_{try}lock_irqsave instead of open coding version

2018-07-03T09:23:06+00:00

commit 8afb1d2c12163f77777f84616a8e9444d0050ebe upstream.

Commit 40f70c03e33a ("serial: sh-sci: add locking to console write
function to avoid SMP lockup") copied the strategy to avoid locking
problems in conjuncture with the console from the UART8250
driver. Instead using directly spin_{try}lock_irqsave(),
local_irq_save() followed by spin_{try}lock() was used. While this is
correct on mainline, for -rt it is a problem. spin_{try}lock() will
check if it is running in a valid context. Since the local_irq_save()
has already been executed, the context has changed and
spin_{try}lock() will complain. The reason why spin_{try}lock()
complains is that on -rt the spin locks are turned into mutexes and
therefore can sleep. Sleeping with interrupts disabled is not valid.

BUG: sleeping function called from invalid context at /home/wagi/work/rt/v4.4-cip-rt/kernel/locking/rtmutex.c:995
in_atomic(): 0, irqs_disabled(): 128, pid: 778, name: irq/76-eth0
CPU: 0 PID: 778 Comm: irq/76-eth0 Not tainted 4.4.126-test-cip22-rt14-00403-gcd03665c8318 #12
Hardware name: Generic RZ/G1 (Flattened Device Tree)
Backtrace:
[] (dump_backtrace) from [] (show_stack+0x18/0x1c)
 r7:c06b01f0 r6:60010193 r5:00000000 r4:c06b01f0
[] (show_stack) from [] (dump_stack+0x78/0x94)
[] (dump_stack) from [] (___might_sleep+0x134/0x194)
 r7:60010113 r6:c06d3559 r5:00000000 r4:ffffe000
[] (___might_sleep) from [] (rt_spin_lock+0x20/0x74)
 r5:c06f4d60 r4:c06f4d60
[] (rt_spin_lock) from [] (serial_console_write+0x100/0x118)
 r5:c06f4d60 r4:c06f4d60
[] (serial_console_write) from [] (call_console_drivers.constprop.15+0x10c/0x124)
 r10:c06d2894 r9:c04e18b0 r8:00000028 r7:00000000 r6:c06d3559 r5:c06d2798
 r4:c06b9914 r3:c02576e4
[] (call_console_drivers.constprop.15) from [] (console_unlock+0x32c/0x430)
 r10:c06d30d8 r9:00000028 r8:c06dd518 r7:00000005 r6:00000000 r5:c06d2798
 r4:c06d2798 r3:00000028
[] (console_unlock) from [] (vprintk_emit+0x394/0x4f0)
 r10:c06d2798 r9:c06d30ee r8:00000006 r7:00000005 r6:c06a78fc r5:00000027
 r4:00000003
[] (vprintk_emit) from [] (vprintk+0x28/0x30)
 r10:c060bd46 r9:00001000 r8:c06b9a90 r7:c06b9a90 r6:c06b994c r5:c06b9a3c
 r4:c0062fa8
[] (vprintk) from [] (vprintk_default+0x10/0x14)
[] (vprintk_default) from [] (printk+0x78/0x84)
[] (printk) from [] (credit_entropy_bits+0x17c/0x2cc)
 r3:00000001 r2:decade60 r1:c061a5ee r0:c061a523
 r4:00000006
[] (credit_entropy_bits) from [] (add_interrupt_randomness+0x160/0x178)
 r10:466e7196 r9:1f536000 r8:fffeef74 r7:00000000 r6:c06b9a60 r5:c06b9a3c
 r4:dfbcf680
[] (add_interrupt_randomness) from [] (irq_thread+0x1e8/0x248)
 r10:c006537c r9:c06cdf21 r8:c0064fcc r7:df791c24 r6:df791c00 r5:ffffe000
 r4:df525180
[] (irq_thread) from [] (kthread+0x108/0x11c)
 r10:00000000 r9:00000000 r8:c0065184 r7:df791c00 r6:00000000 r5:df791d00
 r4:decac000
[] (kthread) from [] (ret_from_fork+0x14/0x3c)
 r8:00000000 r7:00000000 r6:00000000 r5:c003fa9c r4:df791d00

Cc: Sebastian Andrzej Siewior 
Signed-off-by: Daniel Wagner 
Reviewed-by: Geert Uytterhoeven 
Signed-off-by: Greg Kroah-Hartman

tty: pl011: Avoid spuriously stuck-off interrupts

2018-06-16T07:52:34+00:00

commit 4a7e625ce50412a7711efa0f2ef0b96ce3826759 upstream.

Commit 9b96fbacda34 ("serial: PL011: clear pending interrupts")
clears the RX and receive timeout interrupts on pl011 startup, to
avoid a screaming-interrupt scenario that can occur when the
firmware or bootloader leaves these interrupts asserted.

This has been noted as an issue when running Linux on qemu [1].

Unfortunately, the above fix seems to lead to potential
misbehaviour if the RX FIFO interrupt is asserted _non_ spuriously
on driver startup, if the RX FIFO is also already full to the
trigger level.

Clearing the RX FIFO interrupt does not change the FIFO fill level.
In this scenario, because the interrupt is now clear and because
the FIFO is already full to the trigger level, no new assertion of
the RX FIFO interrupt can occur unless the FIFO is drained back
below the trigger level.  This never occurs because the pl011
driver is waiting for an RX FIFO interrupt to tell it that there is
something to read, and does not read the FIFO at all until that
interrupt occurs.

Thus, simply clearing "spurious" interrupts on startup may be
misguided, since there is no way to be sure that the interrupts are
truly spurious, and things can go wrong if they are not.

This patch instead clears the interrupt condition by draining the
RX FIFO during UART startup, after clearing any potentially
spurious interrupt.  This should ensure that an interrupt will
definitely be asserted if the RX FIFO subsequently becomes
sufficiently full.

The drain is done at the point of enabling interrupts only.  This
means that it will occur any time the UART is newly opened through
the tty layer.  It will not apply to polled-mode use of the UART by
kgdboc: since that scenario cannot use interrupts by design, this
should not matter.  kgdboc will interact badly with "normal" use of
the UART in any case: this patch makes no attempt to paper over
such issues.

This patch does not attempt to address the case where the RX FIFO
fills faster than it can be drained: that is a pathological
hardware design problem that is beyond the scope of the driver to
work around.  As a failsafe, the number of poll iterations for
draining the FIFO is limited to twice the FIFO size.  This will
ensure that the kernel at least boots even if it is impossible to
drain the FIFO for some reason.

[1] [Qemu-devel] [Qemu-arm] [PATCH] pl011: do not put into fifo
before enabled the interruption
https://lists.gnu.org/archive/html/qemu-devel/2018-01/msg06446.html

Reported-by: Wei Xu 
Cc: Russell King 
Cc: Linus Walleij 
Cc: Peter Maydell 
Fixes: 9b96fbacda34 ("serial: PL011: clear pending interrupts")
Signed-off-by: Dave Martin 
Cc: stable 
Tested-by: Wei Xu 
Signed-off-by: Greg Kroah-Hartman