linux-toradex.git/drivers/tty, branch v4.9.132

serial: mvebu-uart: Fix reporting of effective CSIZE to userspace

2018-10-10T06:53:17+00:00

commit e0bf2d4982fe7d9ddaf550dd023803ea286f47fc upstream.

Apparently, this driver (or the hardware) does not support character
length settings. It's apparently running in 8-bit mode, but it makes
userspace believe it's in 5-bit mode. That makes tcsetattr with CS8
incorrectly fail, breaking e.g. getty from busybox, thus the login shell
on ttyMVx.

Fix by hard-wiring CS8 into c_cflag.

Signed-off-by: Jan Kiszka 
Fixes: 30530791a7a0 ("serial: mvebu-uart: initial support for Armada-3700 serial port")
Cc: stable  # 4.6+
Signed-off-by: Greg Kroah-Hartman

serial: imx: restore handshaking irq for imx1

2018-10-04T00:01:51+00:00

commit 7e620984b62532783912312e334f3c48cdacbd5d upstream.

Back in 2015 when irda was dropped from the driver imx1 was broken. This
change reintroduces the support for the third interrupt of the UART.

Fixes: afe9cbb1a6ad ("serial: imx: drop support for IRDA")
Cc: stable 
Signed-off-by: Uwe Kleine-König 
Reviewed-by: Leonard Crestez 
Signed-off-by: Greg Kroah-Hartman

serial: cpm_uart: return immediately from console poll

2018-10-04T00:01:49+00:00

commit be28c1e3ca29887e207f0cbcd294cefe5074bab6 upstream.

kgdb expects poll function to return immediately and
returning NO_POLL_CHAR when no character is available.

Fixes: f5316b4aea024 ("kgdb,8250,pl011: Return immediately from console poll")
Cc: Jason Wessel 
Cc: 
Signed-off-by: Christophe Leroy 
Signed-off-by: Greg Kroah-Hartman

tty: serial: lpuart: avoid leaking struct tty_struct

2018-10-04T00:01:49+00:00

commit 3216c622a24b0ebb9c159a8d1daf7f17a106b3f5 upstream.

The function tty_port_tty_get() gets a reference to the tty. Since
the code is not using tty_port_tty_set(), the reference is kept
even after closing the tty.

Avoid using tty_port_tty_get() by directly access the tty instance.
Since lpuart_start_rx_dma() is called from the .startup() and
.set_termios() callback, it is safe to assume the tty instance is
valid.

Cc: stable@vger.kernel.org # v4.9+
Fixes: 5887ad43ee02 ("tty: serial: fsl_lpuart: Use cyclic DMA for Rx")
Signed-off-by: Stefan Agner 
Signed-off-by: Greg Kroah-Hartman

drivers/tty: add error handling for pcmcia_loop_config

2018-10-04T00:01:46+00:00

[ Upstream commit 85c634e919bd6ef17427f26a52920aeba12e16ee ]

When pcmcia_loop_config fails, the lack of error-handling code may
cause unexpected results.

This patch adds error-handling code after calling pcmcia_loop_config.

Signed-off-by: Zhouyang Jia 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

tty: vt_ioctl: fix potential Spectre v1

2018-09-29T10:07:34+00:00

commit e97267cb4d1ee01ca0929638ec0fcbb0904f903d upstream.

vsa.console is indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.

This issue was detected with the help of Smatch:

drivers/tty/vt/vt_ioctl.c:711 vt_ioctl() warn: potential spectre issue
'vc_cons' [r]

Fix this by sanitizing vsa.console before using it to index vc_cons

Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2

Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva 
Reviewed-by: Alan Cox 
Signed-off-by: Greg Kroah-Hartman

tty: rocket: Fix possible buffer overwrite on register_PCI

2018-09-19T20:47:13+00:00

[ Upstream commit 0419056ec8fd01ddf5460d2dba0491aad22657dd ]

If number of isa and pci boards exceed NUM_BOARDS on the path
rp_init()->init_PCI()->register_PCI() then buffer overwrite occurs
in register_PCI() on assign rcktpt_io_addr[i].

The patch adds check on upper bound for index of registered
board in register_PCI.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Anton Vasilyev 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

uart: fix race between uart_put_char() and uart_shutdown()

2018-09-09T18:01:21+00:00

commit a5ba1d95e46ecaea638ddd7cd144107c783acb5d upstream.

We have reports of the following crash:

    PID: 7 TASK: ffff88085c6d61c0 CPU: 1 COMMAND: "kworker/u25:0"
    #0 [ffff88085c6db710] machine_kexec at ffffffff81046239
    #1 [ffff88085c6db760] crash_kexec at ffffffff810fc248
    #2 [ffff88085c6db830] oops_end at ffffffff81008ae7
    #3 [ffff88085c6db860] no_context at ffffffff81050b8f
    #4 [ffff88085c6db8b0] __bad_area_nosemaphore at ffffffff81050d75
    #5 [ffff88085c6db900] bad_area_nosemaphore at ffffffff81050e83
    #6 [ffff88085c6db910] __do_page_fault at ffffffff8105132e
    #7 [ffff88085c6db9b0] do_page_fault at ffffffff8105152c
    #8 [ffff88085c6db9c0] page_fault at ffffffff81a3f122
    [exception RIP: uart_put_char+149]
    RIP: ffffffff814b67b5 RSP: ffff88085c6dba78 RFLAGS: 00010006
    RAX: 0000000000000292 RBX: ffffffff827c5120 RCX: 0000000000000081
    RDX: 0000000000000000 RSI: 000000000000005f RDI: ffffffff827c5120
    RBP: ffff88085c6dba98 R8: 000000000000012c R9: ffffffff822ea320
    R10: ffff88085fe4db04 R11: 0000000000000001 R12: ffff881059f9c000
    R13: 0000000000000001 R14: 000000000000005f R15: 0000000000000fba
    ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
    #9 [ffff88085c6dbaa0] tty_put_char at ffffffff81497544
    #10 [ffff88085c6dbac0] do_output_char at ffffffff8149c91c
    #11 [ffff88085c6dbae0] __process_echoes at ffffffff8149cb8b
    #12 [ffff88085c6dbb30] commit_echoes at ffffffff8149cdc2
    #13 [ffff88085c6dbb60] n_tty_receive_buf_fast at ffffffff8149e49b
    #14 [ffff88085c6dbbc0] __receive_buf at ffffffff8149ef5a
    #15 [ffff88085c6dbc20] n_tty_receive_buf_common at ffffffff8149f016
    #16 [ffff88085c6dbca0] n_tty_receive_buf2 at ffffffff8149f194
    #17 [ffff88085c6dbcb0] flush_to_ldisc at ffffffff814a238a
    #18 [ffff88085c6dbd50] process_one_work at ffffffff81090be2
    #19 [ffff88085c6dbe20] worker_thread at ffffffff81091b4d
    #20 [ffff88085c6dbeb0] kthread at ffffffff81096384
    #21 [ffff88085c6dbf50] ret_from_fork at ffffffff81a3d69f

after slogging through some dissasembly:

ffffffff814b6720 :
ffffffff814b6720:	55                   	push   %rbp
ffffffff814b6721:	48 89 e5             	mov    %rsp,%rbp
ffffffff814b6724:	48 83 ec 20          	sub    $0x20,%rsp
ffffffff814b6728:	48 89 1c 24          	mov    %rbx,(%rsp)
ffffffff814b672c:	4c 89 64 24 08       	mov    %r12,0x8(%rsp)
ffffffff814b6731:	4c 89 6c 24 10       	mov    %r13,0x10(%rsp)
ffffffff814b6736:	4c 89 74 24 18       	mov    %r14,0x18(%rsp)
ffffffff814b673b:	e8 b0 8e 58 00       	callq  ffffffff81a3f5f0 
ffffffff814b6740:	4c 8b a7 88 02 00 00 	mov    0x288(%rdi),%r12
ffffffff814b6747:	45 31 ed             	xor    %r13d,%r13d
ffffffff814b674a:	41 89 f6             	mov    %esi,%r14d
ffffffff814b674d:	49 83 bc 24 70 01 00 	cmpq   $0x0,0x170(%r12)
ffffffff814b6754:	00 00
ffffffff814b6756:	49 8b 9c 24 80 01 00 	mov    0x180(%r12),%rbx
ffffffff814b675d:	00
ffffffff814b675e:	74 2f                	je     ffffffff814b678f 
ffffffff814b6760:	48 89 df             	mov    %rbx,%rdi
ffffffff814b6763:	e8 a8 67 58 00       	callq  ffffffff81a3cf10 <_raw_spin_lock_irqsave>
ffffffff814b6768:	41 8b 8c 24 78 01 00 	mov    0x178(%r12),%ecx
ffffffff814b676f:	00
ffffffff814b6770:	89 ca                	mov    %ecx,%edx
ffffffff814b6772:	f7 d2                	not    %edx
ffffffff814b6774:	41 03 94 24 7c 01 00 	add    0x17c(%r12),%edx
ffffffff814b677b:	00
ffffffff814b677c:	81 e2 ff 0f 00 00    	and    $0xfff,%edx
ffffffff814b6782:	75 23                	jne    ffffffff814b67a7 
ffffffff814b6784:	48 89 c6             	mov    %rax,%rsi
ffffffff814b6787:	48 89 df             	mov    %rbx,%rdi
ffffffff814b678a:	e8 e1 64 58 00       	callq  ffffffff81a3cc70 <_raw_spin_unlock_irqrestore>
ffffffff814b678f:	44 89 e8             	mov    %r13d,%eax
ffffffff814b6792:	48 8b 1c 24          	mov    (%rsp),%rbx
ffffffff814b6796:	4c 8b 64 24 08       	mov    0x8(%rsp),%r12
ffffffff814b679b:	4c 8b 6c 24 10       	mov    0x10(%rsp),%r13
ffffffff814b67a0:	4c 8b 74 24 18       	mov    0x18(%rsp),%r14
ffffffff814b67a5:	c9                   	leaveq
ffffffff814b67a6:	c3                   	retq
ffffffff814b67a7:	49 8b 94 24 70 01 00 	mov    0x170(%r12),%rdx
ffffffff814b67ae:	00
ffffffff814b67af:	48 63 c9             	movslq %ecx,%rcx
ffffffff814b67b2:	41 b5 01             	mov    $0x1,%r13b
ffffffff814b67b5:	44 88 34 0a          	mov    %r14b,(%rdx,%rcx,1)
ffffffff814b67b9:	41 8b 94 24 78 01 00 	mov    0x178(%r12),%edx
ffffffff814b67c0:	00
ffffffff814b67c1:	83 c2 01             	add    $0x1,%edx
ffffffff814b67c4:	81 e2 ff 0f 00 00    	and    $0xfff,%edx
ffffffff814b67ca:	41 89 94 24 78 01 00 	mov    %edx,0x178(%r12)
ffffffff814b67d1:	00
ffffffff814b67d2:	eb b0                	jmp    ffffffff814b6784 
ffffffff814b67d4:	66 66 66 2e 0f 1f 84 	data32 data32 nopw %cs:0x0(%rax,%rax,1)
ffffffff814b67db:	00 00 00 00 00

for our build, this is crashing at:

    circ->buf[circ->head] = c;

Looking in uart_port_startup(), it seems that circ->buf (state->xmit.buf)
protected by the "per-port mutex", which based on uart_port_check() is
state->port.mutex. Indeed, the lock acquired in uart_put_char() is
uport->lock, i.e. not the same lock.

Anyway, since the lock is not acquired, if uart_shutdown() is called, the
last chunk of that function may release state->xmit.buf before its assigned
to null, and cause the race above.

To fix it, let's lock uport->lock when allocating/deallocating
state->xmit.buf in addition to the per-port mutex.

v2: switch to locking uport->lock on allocation/deallocation instead of
    locking the per-port mutex in uart_put_char. Note that since
    uport->lock is a spin lock, we have to switch the allocation to
    GFP_ATOMIC.
v3: move the allocation outside the lock, so we can switch back to
    GFP_KERNEL

Signed-off-by: Tycho Andersen 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

serial: 8250_dw: Add ACPI support for uart on Broadcom SoC

2018-08-22T05:47:15+00:00

commit 784c29eda5b4e28c3a56aa90b3815f9a1b0cfdc1 upstream.

Add ACPI identifier HID for UART DW 8250 on Broadcom SoCs
to match the HID passed through ACPI tables to enable
UART controller.

Signed-off-by: Srinath Mannam 
Reviewed-by: Vladimir Olovyannikov 
Tested-by: Vladimir Olovyannikov 
Reviewed-by: Andy Shevchenko 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Greg Kroah-Hartman

serial: 8250_dw: always set baud rate in dw8250_set_termios

2018-08-22T05:47:15+00:00

commit dfcab6ba573445c703235ab6c83758eec12d7f28 upstream.

dw8250_set_termios() doesn't set baud rate if the arg "old ktermios" is
NULL. This happens during resume.
Call Trace:
...
[   54.928108] dw8250_set_termios+0x162/0x170
[   54.928114] serial8250_set_termios+0x17/0x20
[   54.928117] uart_change_speed+0x64/0x160
[   54.928119] uart_resume_port
...

So the baud rate is not restored after S3 and breaks the apps who use
UART, for example, console and bluetooth etc.

We address this issue by setting the baud rate irrespective of arg
"old", just like the drivers for other 8250 IPs. This is tested with
Intel Broxton platform.

Signed-off-by: Chen Hu 
Fixes: 4e26b134bd17 ("serial: 8250_dw: clock rate handling for all ACPI platforms")
Cc: Heikki Krogerus 
Cc: stable 
Reviewed-by: Andy Shevchenko 
Signed-off-by: Greg Kroah-Hartman