Pull UML updates from Richard Weinberger:

 - Support for optimized routines based on the host CPU

 - Support for PCI via virtio

 - Various fixes

* tag 'for-linus-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: remove unneeded semicolon in um_arch.c
  um: Remove the repeated declaration
  um: fix error return code in winch_tramp()
  um: fix error return code in slip_open()
  um: Fix stack pointer alignment
  um: implement flush_cache_vmap/flush_cache_vunmap
  um: add a UML specific futex implementation
  um: enable the use of optimized xor routines in UML
  um: Add support for host CPU flags and alignment
  um: allow not setting extra rpaths in the linux binary
  um: virtio/pci: enable suspend/resume
  um: add PCI over virtio emulation driver
  um: irqs: allow invoking time-travel handler multiple times
  um: time-travel/signals: fix ndelay() in interrupt
  um: expose time-travel mode to userspace side
  um: export signals_enabled directly
  um: remove unused smp_sigio_handler() declaration
  lib: add iomem emulation (logic_iomem)
  um: allow disabling NO_IOMEM

Pull tty / serial updates from Greg KH:
 "Here is the big set of tty and serial driver patches for 5.14-rc1.

  A bit more than normal, but nothing major, lots of cleanups.
  Highlights are:

   - lots of tty api cleanups and mxser driver cleanups from Jiri

   - build warning fixes

   - various serial driver updates

   - coding style cleanups

   - various tty driver minor fixes and updates

   - removal of broken and disable r3964 line discipline (finally!)

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (227 commits)
  serial: mvebu-uart: remove unused member nb from struct mvebu_uart
  arm64: dts: marvell: armada-37xx: Fix reg for standard variant of UART
  dt-bindings: mvebu-uart: fix documentation
  serial: mvebu-uart: correctly calculate minimal possible baudrate
  serial: mvebu-uart: do not allow changing baudrate when uartclk is not available
  serial: mvebu-uart: fix calculation of clock divisor
  tty: make linux/tty_flip.h self-contained
  serial: Prefer unsigned int to bare use of unsigned
  serial: 8250: 8250_omap: Fix possible interrupt storm on K3 SoCs
  serial: qcom_geni_serial: use DT aliases according to DT bindings
  Revert "tty: serial: Add UART driver for Cortina-Access platform"
  tty: serial: Add UART driver for Cortina-Access platform
  MAINTAINERS: add me back as mxser maintainer
  mxser: Documentation, fix typos
  mxser: Documentation, make the docs up-to-date
  mxser: Documentation, remove traces of callout device
  mxser: introduce mxser_16550A_or_MUST helper
  mxser: rename flags to old_speed in mxser_set_serial_info
  mxser: use port variable in mxser_set_serial_info
  mxser: access info->MCR under info->slock
  ...

Pull driver core changes from Greg KH:
 "Here is the small set of driver core and debugfs updates for 5.14-rc1.

  Included in here are:

   - debugfs api cleanups (touched some drivers)

   - devres updates

   - tiny driver core updates and tweaks

  Nothing major in here at all, and all have been in linux-next for a
  while with no reported issues"

* tag 'driver-core-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (27 commits)
  docs: ABI: testing: sysfs-firmware-memmap: add some memmap types.
  devres: Enable trace events
  devres: No need to call remove_nodes() when there none present
  devres: Use list_for_each_safe_from() in remove_nodes()
  devres: Make locking straight forward in release_nodes()
  kernfs: move revalidate to be near lookup
  drivers/base: Constify static attribute_group structs
  firmware_loader: remove unneeded 'comma' macro
  devcoredump: remove contact information
  driver core: Drop helper devm_platform_ioremap_resource_wc()
  component: Rename 'dev' to 'parent'
  component: Drop 'dev' argument to component_match_realloc()
  device property: Don't check for NULL twice in the loops
  driver core: auxiliary bus: Fix typo in the docs
  drivers/base/node.c: make CACHE_ATTR define static DEVICE_ATTR_RO
  debugfs: remove return value of debugfs_create_ulong()
  debugfs: remove return value of debugfs_create_bool()
  scsi: snic: debugfs: remove local storage of debugfs files
  b43: don't save dentries for debugfs
  b43legacy: don't save dentries for debugfs
  ...

Pull char / misc driver updates from Greg KH:
 "Here is the big set of char / misc and other driver subsystem updates
  for 5.14-rc1. Included in here are:

   - habanalabs driver updates

   - fsl-mc driver updates

   - comedi driver updates

   - fpga driver updates

   - extcon driver updates

   - interconnect driver updates

   - mei driver updates

   - nvmem driver updates

   - phy driver updates

   - pnp driver updates

   - soundwire driver updates

   - lots of other tiny driver updates for char and misc drivers

  This is looking more and more like the "various driver subsystems
  mushed together" tree...

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits)
  mcb: Use DEFINE_RES_MEM() helper macro and fix the end address
  PNP: moved EXPORT_SYMBOL so that it immediately followed its function/variable
  bus: mhi: pci-generic: Add missing 'pci_disable_pcie_error_reporting()' calls
  bus: mhi: Wait for M2 state during system resume
  bus: mhi: core: Fix power down latency
  intel_th: Wait until port is in reset before programming it
  intel_th: msu: Make contiguous buffers uncached
  intel_th: Remove an unused exit point from intel_th_remove()
  stm class: Spelling fix
  nitro_enclaves: Set Bus Master for the NE PCI device
  misc: ibmasm: Modify matricies to matrices
  misc: vmw_vmci: return the correct errno code
  siox: Simplify error handling via dev_err_probe()
  fpga: machxo2-spi: Address warning about unused variable
  lkdtm/heap: Add init_on_alloc tests
  selftests/lkdtm: Enable various testable CONFIGs
  lkdtm: Add CONFIG hints in errors where possible
  lkdtm: Enable DOUBLE_FAULT on all architectures
  lkdtm/heap: Add vmalloc linear overflow test
  lkdtm/bugs: XFAIL UNALIGNED_LOAD_STORE_WRITE
  ...

Pull s390 updates from Vasily Gorbik:

 - Rework inline asm to get rid of error prone "register asm"
   constructs, which are problematic especially when code
   instrumentation is enabled.

   In particular introduce and use register pair union to allocate
   even/odd register pairs. Unfortunately this breaks compatibility with
   older clang compilers and minimum clang version for s390 has been
   raised to 13.

     https://lore.kernel.org/linux-next/CAK7LNARuSmPCEy-ak0erPrPTgZdGVypBROFhtw+=3spoGoYsyw@mail.gmail.com/

 - Fix gcc 11 warnings, which triggered various minor reworks all over
   the code.

 - Add zstd kernel image compression support.

 - Rework boot CPU lowcore handling.

 - De-duplicate and move kernel memory layout setup logic earlier.

 - Few fixes in preparation for FORTIFY_SOURCE performing compile-time
   and run-time field bounds checking for mem functions.

 - Remove broken and unused power management support leftovers in s390
   drivers.

 - Disable stack-protector for decompressor and purgatory to fix
   buildroot build.

 - Fix vt220 sclp console name to match the char device name.

 - Enable HAVE_IOREMAP_PROT and add zpci_set_irq()/zpci_clear_irq() in
   zPCI code.

 - Remove some implausible WARN_ON_ONCEs and remove arch specific
   counter transaction call backs in favour of default transaction
   handling in perf code.

 - Extend/add new uevents for online/config/mode state changes of AP
   card / queue device in zcrypt.

 - Minor entry and ccwgroup code improvements.

 - Other small various fixes and improvements all over the code.

* tag 's390-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (91 commits)
  s390/dasd: use register pair instead of register asm
  s390/qdio: get rid of register asm
  s390/ioasm: use symbolic names for asm operands
  s390/ioasm: get rid of register asm
  s390/cmf: get rid of register asm
  s390/lib,string: get rid of register asm
  s390/lib,uaccess: get rid of register asm
  s390/string: get rid of register asm
  s390/cmpxchg: use register pair instead of register asm
  s390/mm,pages-states: get rid of register asm
  s390/lib,xor: get rid of register asm
  s390/timex: get rid of register asm
  s390/hypfs: use register pair instead of register asm
  s390/zcrypt: Switch to flexible array member
  s390/speculation: Use statically initialized const for instructions
  virtio/s390: get rid of open-coded kvm hypercall
  s390/pci: add zpci_set_irq()/zpci_clear_irq()
  scripts/min-tool-version.sh: Raise minimum clang version to 13.0.0 for s390
  s390/ipl: use register pair instead of register asm
  s390/mem_detect: fix tprot() program check new psw handling
  ...

Pull powerpc updates from Michael Ellerman:

 - A big series refactoring parts of our KVM code, and converting some
   to C.

 - Support for ARCH_HAS_SET_MEMORY, and ARCH_HAS_STRICT_MODULE_RWX on
   some CPUs.

 - Support for the Microwatt soft-core.

 - Optimisations to our interrupt return path on 64-bit.

 - Support for userspace access to the NX GZIP accelerator on PowerVM on
   Power10.

 - Enable KUAP and KUEP by default on 32-bit Book3S CPUs.

 - Other smaller features, fixes & cleanups.

Thanks to: Andy Shevchenko, Aneesh Kumar K.V, Arnd Bergmann, Athira
Rajeev, Baokun Li, Benjamin Herrenschmidt, Bharata B Rao, Christophe
Leroy, Daniel Axtens, Daniel Henrique Barboza, Finn Thain, Geoff Levand,
Haren Myneni, Jason Wang, Jiapeng Chong, Joel Stanley, Jordan Niethe,
Kajol Jain, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas
Piggin, Nick Desaulniers, Paul Mackerras, Russell Currey, Sathvika
Vasireddy, Shaokun Zhang, Stephen Rothwell, Sudeep Holla, Suraj Jitindar
Singh, Tom Rix, Vaibhav Jain, YueHaibing, Zhang Jianhua, and Zhen Lei.

* tag 'powerpc-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (218 commits)
  powerpc: Only build restart_table.c for 64s
  powerpc/64s: move ret_from_fork etc above __end_soft_masked
  powerpc/64s/interrupt: clean up interrupt return labels
  powerpc/64/interrupt: add missing kprobe annotations on interrupt exit symbols
  powerpc/64: enable MSR[EE] in irq replay pt_regs
  powerpc/64s/interrupt: preserve regs->softe for NMI interrupts
  powerpc/64s: add a table of implicit soft-masked addresses
  powerpc/64e: remove implicit soft-masking and interrupt exit restart logic
  powerpc/64e: fix CONFIG_RELOCATABLE build warnings
  powerpc/64s: fix hash page fault interrupt handler
  powerpc/4xx: Fix setup_kuep() on SMP
  powerpc/32s: Fix setup_{kuap/kuep}() on SMP
  powerpc/interrupt: Use names in check_return_regs_valid()
  powerpc/interrupt: Also use exit_must_hard_disable() on PPC32
  powerpc/sysfs: Replace sizeof(arr)/sizeof(arr[0]) with ARRAY_SIZE
  powerpc/ptrace: Refactor regs_set_return_{msr/ip}
  powerpc/ptrace: Move set_return_regs_changed() before regs_set_return_{msr/ip}
  powerpc/stacktrace: Fix spurious "stale" traces in raise_backtrace_ipi()
  powerpc/pseries/vas: Include irqdomain.h
  powerpc: mark local variables around longjmp as volatile
  ...

Member nb in struct mvebu_uart is not set nor read. So remove it completely.

Signed-off-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20210624224909.6350-7-pali@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For default (x16) scheme which is currently used by mvebu-uart.c driver,
maximal divisor of UART base clock is 1023*16. Therefore there is limit for
minimal supported baudrate. This change calculate it correctly and prevents
setting invalid divisor 0 into hardware registers.

Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 68a0db1d7da2 ("serial: mvebu-uart: add function to change baudrate")
Link: https://lore.kernel.org/r/20210624224909.6350-4-pali@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Testing mvuart->clk for non-error is not enough as mvuart->clk may contain
valid clk pointer but when clk_prepare_enable(mvuart->clk) failed then
port->uartclk is zero.

When mvuart->clk is not available then port->uartclk is zero too.

Parent clock rate port->uartclk is needed to calculate UART clock divisor
and without it is not possible to change baudrate.

So fix test condition when it is possible to change baudrate.

Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 68a0db1d7da2 ("serial: mvebu-uart: add function to change baudrate")
Link: https://lore.kernel.org/r/20210624224909.6350-3-pali@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The clock divisor should be rounded to the closest value.

Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 68a0db1d7da2 ("serial: mvebu-uart: add function to change baudrate")
Cc: stable@vger.kernel.org # 0e4cf69ede87 ("serial: mvebu-uart: clarify the baud rate derivation")
Link: https://lore.kernel.org/r/20210624224909.6350-2-pali@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>