The conversion of all GPIO drivers to using the .set_rv() and
.set_multiple_rv() callbacks from struct gpio_chip (which - unlike their
predecessors - return an integer and allow the controller drivers to
indicate failures to users) is now complete and the legacy ones have
been removed. Rename the new callbacks back to their original names in
one sweeping change.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Pull MIPS updates from Thomas Bogendoerfer:

 - DT updates for ralink, mobileye and atheros/qualcomm

 - Clean up of mc146818 usage

 - Speed up delay calibration for CPS

 - Other cleanups and fixes

* tag 'mips_6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (50 commits)
  MIPS: Don't use %pK through printk
  MIPS: Update Joshua Kinard's e-mail address
  MIPS: mobileye: dts: eyeq5,eyeq6h: rename the emmc controller
  MIPS: mm: tlb-r4k: Uniquify TLB entries on init
  MIPS: SGI-IP27: Delete an unnecessary check before kfree() in hub_domain_free()
  mips/malta,loongson2ef: use generic mc146818_get_time function
  mips: remove redundant macro mc146818_decode_year
  mips/mach-rm: remove custom mc146818rtc.h file
  mips: remove unused function mc146818_set_rtc_mmss
  MIPS: CPS: Optimise delay CPU calibration for SMP
  MIPS: CPS: Improve mips_cps_first_online_in_cluster()
  MIPS: disable MMID when not supported by the hardware
  MIPS: eyeq5_defconfig: add I2C subsystem, driver and temp sensor driver
  MIPS: eyeq5_defconfig: add GPIO subsystem & driver
  MIPS: mobileye: eyeq5: add two GPIO bank nodes
  MIPS: mobileye: eyeq5: add evaluation board I2C temp sensor
  MIPS: mobileye: eyeq5: add 5 I2C controller nodes
  MIPS: eyeq5_defconfig: Update for v6.16-rc1
  MIPS: vpe-mt: add missing prototypes for vpe_{alloc,start,stop,free}
  mips: boot: use 'targets' instead of extra-y in Makefile
  ...

Pull sysctl updates from Joel Granados:

 - Move sysctls out of the kern_table array

   This is the final move of ctl_tables into their respective
   subsystems. Only 5 (out of the original 50) will remain in
   kernel/sysctl.c file; these handle either sysctl or common arch
   variables.

   By decentralizing sysctl registrations, subsystem maintainers regain
   control over their sysctl interfaces, improving maintainability and
   reducing the likelihood of merge conflicts.

 - docs: Remove false positives from check-sysctl-docs

   Stopped falsely identifying sysctls as undocumented or unimplemented
   in the check-sysctl-docs script. This script can now be used to
   automatically identify if documentation is missing.

* tag 'sysctl-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl: (23 commits)
  docs: Downgrade arm64 & riscv from titles to comment
  docs: Replace spaces with tabs in check-sysctl-docs
  docs: Remove colon from ctltable title in vm.rst
  docs: Add awk section for ucount sysctl entries
  docs: Use skiplist when checking sysctl admin-guide
  docs: nixify check-sysctl-docs
  sysctl: rename kern_table -> sysctl_subsys_table
  kernel/sys.c: Move overflow{uid,gid} sysctl into kernel/sys.c
  uevent: mv uevent_helper into kobject_uevent.c
  sysctl: Removed unused variable
  sysctl: Nixify sysctl.sh
  sysctl: Remove superfluous includes from kernel/sysctl.c
  sysctl: Remove (very) old file changelog
  sysctl: Move sysctl_panic_on_stackoverflow to kernel/panic.c
  sysctl: move cad_pid into kernel/pid.c
  sysctl: Move tainted ctl_table into kernel/panic.c
  Input: sysrq: mv sysrq into drivers/tty/sysrq.c
  fork: mv threads-max into kernel/fork.c
  parisc/power: Move soft-power into power.c
  mm: move randomize_va_space into memory.c
  ...

Pull tty / serial driver updates from Greg KH:
 "Here is the big set of TTY and Serial driver updates for 6.17-rc1.
  Included in here is the following types of changes:

   - another cleanup round from Jiri for the 8250 serial driver and some
     other tty drivers, things are slowly getting better with our apis
     thanks to this work. This touched many tty drivers all over the
     tree.

   - qcom_geni_serial driver update for new platforms and devices

   - 8250 quirk handling fixups

   - dt serial binding updates for different boards/platforms

   - other minor cleanups and fixes

  All of these have been in linux-next with no reported issues"

* tag 'tty-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits)
  dt-bindings: serial: snps-dw-apb-uart: Allow use of a power-domain
  serial: 8250: fix panic due to PSLVERR
  dt-bindings: serial: samsung: add samsung,exynos2200-uart compatible
  vt: defkeymap: Map keycodes above 127 to K_HOLE
  vt: keyboard: Don't process Unicode characters in K_OFF mode
  serial: qcom-geni: Enable Serial on SA8255p Qualcomm platforms
  serial: qcom-geni: Enable PM runtime for serial driver
  serial: qcom-geni: move clock-rate logic to separate function
  serial: qcom-geni: move resource control logic to separate functions
  serial: qcom-geni: move resource initialization to separate function
  soc: qcom: geni-se: Enable QUPs on SA8255p Qualcomm platforms
  dt-bindings: qcom: geni-se: describe SA8255p
  dt-bindings: serial: describe SA8255p
  serial: 8250_dw: Fix typo "notifer"
  dt-bindings: serial: 8250: spacemit: set clocks property as required
  dt-bindings: serial: renesas: Document RZ/V2N SCIF
  serial: 8250_ce4100: Fix CONFIG_SERIAL_8250=n build
  tty: omit need_resched() before cond_resched()
  serial: 8250_ni: Reorder local variables
  serial: 8250_ni: Fix build warning
  ...

Pull power management updates from Rafael Wysocki:
 "As is tradition, cpufreq is the part with the largest number of
  updates that include core fixes and cleanups as well as updates of
  several assorted drivers, but there are also quite a few updates
  related to system sleep, mostly focused on asynchronous suspend and
  resume of devices and on making the integration of system suspend
  and resume with runtime PM easier.

  Runtime PM is also updated to allow some code duplication in drivers
  to be eliminated going forward and to work more consistently overall
  in some cases.

  Apart from that, there are some driver core updates related to PM
  domains that should help to address ordering issues with devm_ cleanup
  routines relying on PM domains, some assorted devfreq updates
  including core fixes and cleanups, tooling updates, and documentation
  and MAINTAINERS updates.

  Specifics:

   - Fix two initialization ordering issues in the cpufreq core and a
     governor initialization error path in it, and clean it up (Lifeng
     Zheng)

   - Add Granite Rapids support in no-HWP mode to the intel_pstate
     cpufreq driver (Li RongQing)

   - Make intel_pstate always use HWP_DESIRED_PERF when operating in the
     passive mode (Rafael Wysocki)

   - Allow building the tegra124 cpufreq driver as a module (Aaron
     Kling)

   - Do minor cleanups for Rust cpufreq and cpumask APIs and fix
     MAINTAINERS entry for cpu.rs (Abhinav Ananthu, Ritvik Gupta, Lukas
     Bulwahn)

   - Clean up assorted cpufreq drivers (Arnd Bergmann, Dan Carpenter,
     Krzysztof Kozlowski, Sven Peter, Svyatoslav Ryhel, Lifeng Zheng)

   - Add the NEED_UPDATE_LIMITS flag to the CPPC cpufreq driver
     (Prashant Malani)

   - Fix minimum performance state label error in the amd-pstate driver
     documentation (Shouye Liu)

   - Add the CPUFREQ_GOV_STRICT_TARGET flag to the userspace cpufreq
     governor and explain HW coordination influence on it in the
     documentation (Shashank Balaji)

   - Fix opencoded for_each_cpu() in idle_state_valid() in the DT
     cpuidle driver (Yury Norov)

   - Remove info about non-existing QoS interfaces from the PM QoS
     documentation (Ulf Hansson)

   - Use c_* types via kernel prelude in Rust for OPP (Abhinav Ananthu)

   - Add HiSilicon uncore frequency scaling driver to devfreq (Jie Zhan)

   - Allow devfreq drivers to add custom sysfs ABIs (Jie Zhan)

   - Simplify the sun8i-a33-mbus devfreq driver by using more devm
     functions (Uwe Kleine-König)

   - Fix an index typo in trans_stat() in devfreq (Chanwoo Choi)

   - Check devfreq governor before using governor->name (Lifeng Zheng)

   - Remove a redundant devfreq_get_freq_range() call from
     devfreq_add_device() (Lifeng Zheng)

   - Limit max_freq with scaling_min_freq in devfreq (Lifeng Zheng)

   - Replace sscanf() with kstrtoul() in set_freq_store() (Lifeng Zheng)

   - Extend the asynchronous suspend and resume of devices to handle
     suppliers like parents and consumers like children (Rafael Wysocki)

   - Make pm_runtime_force_resume() work for drivers that set the
     DPM_FLAG_SMART_SUSPEND flag and allow PCI drivers and drivers that
     collaborate with the general ACPI PM domain to set it (Rafael
     Wysocki)

   - Add kernel parameter to disable asynchronous suspend/resume of
     devices (Tudor Ambarus)

   - Drop redundant might_sleep() calls from some functions in the
     device suspend/resume core code (Zhongqiu Han)

   - Fix the handling of monitors connected right before waking up the
     system from sleep (tuhaowen)

   - Clean up MAINTAINERS entries for suspend and hibernation (Rafael
     Wysocki)

   - Fix error code path in the KEXEC_JUMP flow and drop a redundant
     pm_restore_gfp_mask() call from it (Rafael Wysocki)

   - Rearrange suspend/resume error handling in the core device suspend
     and resume code (Rafael Wysocki)

   - Fix up white space that does not follow coding style in the
     hibernation core code (Darshan Rathod)

   - Document return values of suspend-related API functions in the
     runtime PM framework (Sakari Ailus)

   - Mark last busy stamp in multiple autosuspend-related functions in
     the runtime PM framework and update its documentation (Sakari
     Ailus)

   - Take active children into account in pm_runtime_get_if_in_use() for
     consistency (Rafael Wysocki)

   - Fix NULL pointer dereference in get_pd_power_uw() in the dtpm_cpu
     power capping driver (Sivan Zohar-Kotzer)

   - Add support for the Bartlett Lake platform to the Intel RAPL power
     capping driver (Qiao Wei)

   - Add PL4 support for Panther Lake to the intel_rapl_msr power
     capping driver (Zhang Rui)

   - Update contact information in the PM ABI docs and maintainer
     information in the power domains DT binding (Rafael Wysocki)

   - Update PM header inclusions to follow the IWYU (Include What You
     Use) principle (Andy Shevchenko)

   - Add flags to specify power on attach/detach for PM domains, make
     the driver core detach PM domains in device_unbind_cleanup(), and
     drop the dev_pm_domain_detach() call from the platform bus type
     (Claudiu Beznea)

   - Improve Python binding's Makefile for cpupower (John B. Wyatt IV)

   - Fix printing of CORE, CPU fields in cpupower-monitor (Gautham
     Shenoy)"

* tag 'pm-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (75 commits)
  cpufreq: CPPC: Mark driver with NEED_UPDATE_LIMITS flag
  PM: docs: Use my kernel.org address in ABI docs and DT bindings
  PM: hibernate: Fix up white space that does not follow coding style
  PM: sleep: Rearrange suspend/resume error handling in the core
  Documentation: amd-pstate:fix minimum performance state label error
  PM: runtime: Take active children into account in pm_runtime_get_if_in_use()
  kexec_core: Drop redundant pm_restore_gfp_mask() call
  kexec_core: Fix error code path in the KEXEC_JUMP flow
  PM: sleep: Clean up MAINTAINERS entries for suspend and hibernation
  drivers: cpufreq: add Tegra114 support
  rust: cpumask: Replace `MaybeUninit` and `mem::zeroed` with `Opaque` APIs
  cpufreq: Exit governor when failed to start old governor
  cpufreq: Move the check of cpufreq_driver->get into cpufreq_verify_current_freq()
  cpufreq: Init policy->rwsem before it may be possibly used
  cpufreq: Initialize cpufreq-based frequency-invariance later
  cpufreq: Remove duplicate check in __cpufreq_offline()
  cpufreq: Contain scaling_cur_freq.attr in cpufreq_attrs
  cpufreq: intel_pstate: Add Granite Rapids support in no-HWP mode
  cpufreq: intel_pstate: Always use HWP_DESIRED_PERF in passive mode
  PM / devfreq: Add HiSilicon uncore frequency scaling driver
  ...

I am switching my address to a personal domain, so some files in the
SGI IP30 and IOC3 files need to be updated.  I will send updates for
the MAINTAINERS file and rtc-ds1685 separately to linux-rtc.

Signed-off-by: Joshua Kinard <kumba@gentoo.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

When the PSLVERR_RESP_EN parameter is set to 1, the device generates
an error response if an attempt is made to read an empty RBR (Receive
Buffer Register) while the FIFO is enabled.

In serial8250_do_startup(), calling serial_port_out(port, UART_LCR,
UART_LCR_WLEN8) triggers dw8250_check_lcr(), which invokes
dw8250_force_idle() and serial8250_clear_and_reinit_fifos(). The latter
function enables the FIFO via serial_out(p, UART_FCR, p->fcr).
Execution proceeds to the serial_port_in(port, UART_RX).
This satisfies the PSLVERR trigger condition.

When another CPU (e.g., using printk()) is accessing the UART (UART
is busy), the current CPU fails the check (value & ~UART_LCR_SPAR) ==
(lcr & ~UART_LCR_SPAR) in dw8250_check_lcr(), causing it to enter
dw8250_force_idle().

Put serial_port_out(port, UART_LCR, UART_LCR_WLEN8) under the port->lock
to fix this issue.

Panic backtrace:
[    0.442336] Oops - unknown exception [#1]
[    0.442343] epc : dw8250_serial_in32+0x1e/0x4a
[    0.442351]  ra : serial8250_do_startup+0x2c8/0x88e
...
[    0.442416] console_on_rootfs+0x26/0x70

Fixes: c49436b657d0 ("serial: 8250_dw: Improve unwritable LCR workaround")
Link: https://lore.kernel.org/all/84cydt5peu.fsf@jogness.linutronix.de/T/
Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20250723023322.464-2-cuiyunhui@bytedance.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move both sysrq ctl_table and supported sysrq_sysctl_handler helper
function into drivers/tty/sysrq.c. Replaced the __do_proc_dointvec in
helper function with do_proc_dointvec_minmax as the former is local to
kernel/sysctl.c. Here we use the minmax version of do_proc_dointvec
because do_proc_dointvec is static and calling do_proc_dointvec_minmax
with a NULL min and max is the same as calling do_proc_dointvec.

This is part of a greater effort to move ctl tables into their
respective subsystems which will reduce the merge conflicts in
kernel/sysctl.c.

Reviewed-by: Kees Cook <kees@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joel Granados <joel.granados@kernel.org>

The maximum number of keycodes got bumped to 256 a very long time ago,
but the default keymaps were never adjusted to match. This is causing
the kernel to interpret keycodes above 127 as U+0000 if the shipped
generated keymap is used.

Fix this by mapping all keycodes above 127 to K_HOLE so the kernel
ignores them.

The contents of this patche were generated by rerunning `loadkeys
--mktable --unicode` and only including the changes to map keycodes
above 127 to K_HOLE.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Myrrh Periwinkle <myrrhperiwinkle@qtmlabs.xyz>
Cc: stable <stable@kernel.org>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250702-vt-misc-unicode-fixes-v1-2-c27e143cc2eb@qtmlabs.xyz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We don't process Unicode characters if the virtual terminal is in raw
mode, so there's no reason why we shouldn't do the same for K_OFF
(especially since people would expect K_OFF to actually turn off all VT
key processing).

Fixes: 9fc3de9c8356 ("vt: Add virtual console keyboard mode OFF")
Signed-off-by: Myrrh Periwinkle <myrrhperiwinkle@qtmlabs.xyz>
Cc: stable <stable@kernel.org>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250702-vt-misc-unicode-fixes-v1-1-c27e143cc2eb@qtmlabs.xyz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>