linux-toradex.git/drivers/usb/atm, branch v3.11

drivers: avoid parsing names as kthread_run() format strings

2013-07-03T23:07:41+00:00

Calling kthread_run with a single name parameter causes it to be handled
as a format string. Many callers are passing potentially dynamic string
content, so use "%s" in those cases to avoid any potential accidents.

Signed-off-by: Kees Cook 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

USB: cxacru: potential underflow in cxacru_cm_get_array()

2013-05-20T18:35:47+00:00

The value of "offd" comes off the instance->rcv_buf[] and we used it as
the offset into an array.  The problem is that we check the upper bound
but not for negative values.

Signed-off-by: Dan Carpenter 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

usbatm: fix potential NULL pointer dereference

2013-04-19T17:20:41+00:00

The dereference to 'instance' in the debug code should be moved
below the NULL test.

Signed-off-by: Wei Yongjun 
Signed-off-by: Duncan Sands 
Signed-off-by: Greg Kroah-Hartman

USB: regroup all depends on USB within an if USB block

2013-04-09T23:49:07+00:00

This patch removes the depends on USB from all config symbols in
drivers/usb/host/Kconfig and replace that with an if USB / endif block
as suggested by Alan Stern. Some source ... Kconfig lines have been
shuffled around to permit a better regroupment of the Kconfig files
depending on "config USB" item. No functionnal change is introduced.

Acked-by: Alan Stern 
Signed-off-by: Florian Fainelli 
Signed-off-by: Greg Kroah-Hartman

Merge branch 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq

2012-10-02T16:54:49+00:00

Pull workqueue changes from Tejun Heo:
 "This is workqueue updates for v3.7-rc1.  A lot of activities this
  round including considerable API and behavior cleanups.

   * delayed_work combines a timer and a work item.  The handling of the
     timer part has always been a bit clunky leading to confusing
     cancelation API with weird corner-case behaviors.  delayed_work is
     updated to use new IRQ safe timer and cancelation now works as
     expected.

   * Another deficiency of delayed_work was lack of the counterpart of
     mod_timer() which led to cancel+queue combinations or open-coded
     timer+work usages.  mod_delayed_work[_on]() are added.

     These two delayed_work changes make delayed_work provide interface
     and behave like timer which is executed with process context.

   * A work item could be executed concurrently on multiple CPUs, which
     is rather unintuitive and made flush_work() behavior confusing and
     half-broken under certain circumstances.  This problem doesn't
     exist for non-reentrant workqueues.  While non-reentrancy check
     isn't free, the overhead is incurred only when a work item bounces
     across different CPUs and even in simulated pathological scenario
     the overhead isn't too high.

     All workqueues are made non-reentrant.  This removes the
     distinction between flush_[delayed_]work() and
     flush_[delayed_]_work_sync().  The former is now as strong as the
     latter and the specified work item is guaranteed to have finished
     execution of any previous queueing on return.

   * In addition to the various bug fixes, Lai redid and simplified CPU
     hotplug handling significantly.

   * Joonsoo introduced system_highpri_wq and used it during CPU
     hotplug.

  There are two merge commits - one to pull in IRQ safe timer from
  tip/timers/core and the other to pull in CPU hotplug fixes from
  wq/for-3.6-fixes as Lai's hotplug restructuring depended on them."

Fixed a number of trivial conflicts, but the more interesting conflicts
were silent ones where the deprecated interfaces had been used by new
code in the merge window, and thus didn't cause any real data conflicts.

Tejun pointed out a few of them, I fixed a couple more.

* 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (46 commits)
  workqueue: remove spurious WARN_ON_ONCE(in_irq()) from try_to_grab_pending()
  workqueue: use cwq_set_max_active() helper for workqueue_set_max_active()
  workqueue: introduce cwq_set_max_active() helper for thaw_workqueues()
  workqueue: remove @delayed from cwq_dec_nr_in_flight()
  workqueue: fix possible stall on try_to_grab_pending() of a delayed work item
  workqueue: use hotcpu_notifier() for workqueue_cpu_down_callback()
  workqueue: use __cpuinit instead of __devinit for cpu callbacks
  workqueue: rename manager_mutex to assoc_mutex
  workqueue: WORKER_REBIND is no longer necessary for idle rebinding
  workqueue: WORKER_REBIND is no longer necessary for busy rebinding
  workqueue: reimplement idle worker rebinding
  workqueue: deprecate __cancel_delayed_work()
  workqueue: reimplement cancel_delayed_work() using try_to_grab_pending()
  workqueue: use mod_delayed_work() instead of __cancel + queue
  workqueue: use irqsafe timer for delayed_work
  workqueue: clean up delayed_work initializers and add missing one
  workqueue: make deferrable delayed_work initializer names consistent
  workqueue: cosmetic whitespace updates for macro definitions
  workqueue: deprecate system_nrt[_freezable]_wq
  workqueue: deprecate flush[_delayed]_work_sync()
  ...

USB: atm: usbatm: fix up debug printing code

2012-09-13T18:21:12+00:00

If VERBOSE_DEBUG was enabled, lots of build errors happend (obviously no
one uses this mode.)  So fix that up, and get rid of the dbg() call, and
use dev_dbg() like the rest of the driver does.

Cc: Duncan Sands 
Signed-off-by: Greg Kroah-Hartman

workqueue: deprecate flush[_delayed]_work_sync()

2012-08-20T21:51:24+00:00

flush[_delayed]_work_sync() are now spurious.  Mark them deprecated
and convert all users to flush[_delayed]_work().

If you're cc'd and wondering what's going on: Now all workqueues are
non-reentrant and the regular flushes guarantee that the work item is
not pending or running on any CPU on return, so there's no reason to
use the sync flushes at all and they're going away.

This patch doesn't make any functional difference.

Signed-off-by: Tejun Heo 
Cc: Russell King 
Cc: Paul Mundt 
Cc: Ian Campbell 
Cc: Jens Axboe 
Cc: Mattia Dongili 
Cc: Kent Yoder 
Cc: David Airlie 
Cc: Jiri Kosina 
Cc: Karsten Keil 
Cc: Bryan Wu 
Cc: Benjamin Herrenschmidt 
Cc: Alasdair Kergon 
Cc: Mauro Carvalho Chehab 
Cc: Florian Tobias Schandinat 
Cc: David Woodhouse 
Cc: "David S. Miller" 
Cc: linux-wireless@vger.kernel.org
Cc: Anton Vorontsov 
Cc: Sangbeom Kim 
Cc: "James E.J. Bottomley" 
Cc: Greg Kroah-Hartman 
Cc: Eric Van Hensbergen 
Cc: Takashi Iwai 
Cc: Steven Whitehouse 
Cc: Petr Vandrovec 
Cc: Mark Fasheh 
Cc: Christoph Hellwig 
Cc: Avi Kivity

USB: atm: ueagle-atm: Declare MODULE_FIRMWARE usage

2012-08-15T22:17:40+00:00

Signed-off-by: Tim Gardner 
Cc: Stanislaw Gruszka 
Acked-by: Matthieu Castet 
Signed-off-by: Greg Kroah-Hartman

usb: Use eth_random_addr

2012-07-17T05:39:07+00:00

Convert the existing uses of random_ether_addr to
the new eth_random_addr.

Signed-off-by: Joe Perches 
Acked-by: Felipe Balbi 
Signed-off-by: David S. Miller

USB: xusbatm.c: remove dbg() usage

2012-05-02T04:33:30+00:00

dbg() was a very old USB-specific macro that should no longer
be used. This patch removes it from being used in the driver
and uses dev_dbg() instead.

Signed-off-by: Greg Kroah-Hartman