linux-toradex.git/drivers/usb/chipidea/bits.h, branch v4.10 Linux kernel for Apalis and Colibri modules usb: chipidea: add tx/rx burst size configuration interface 2015-08-14T02:03:58+00:00 Peter Chen peter.chen@freescale.com 2015-03-17T09:32:45+00:00 96625eadca1bb8832fb502f0899a543695f1ba35 The user can adjust it through dts or platform data Signed-off-by: Peter Chen <peter.chen@freescale.com> 
The user can adjust it through dts or platform data

Signed-off-by: Peter Chen <peter.chen@freescale.com>
usb: chipidea: add ahb burst configuration interface 2015-08-14T02:03:55+00:00 Peter Chen peter.chen@freescale.com 2015-03-17T06:21:00+00:00 65668718f2c5b76d5f4513564a3c56672bb07892 The users can change it through dts or platform data if they want to change the default value. Signed-off-by: Peter Chen <peter.chen@freescale.com> 
The users can change it through dts or platform data if they
want to change the default value.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
usb: chipidea: add ttctrl.ttha control interface 2015-08-14T01:13:10+00:00 Peter Chen peter.chen@freescale.com 2015-06-18T03:51:53+00:00 28362673129e7d4510a5a92a8b68ee47f282210b The register of ttctrl.ttha describes like below: - Internal TT Hub Address Representation - RW - Default = 0000000b This field is used to match against the Hub Address field in QH & siTD to determine if the packet is routed to the internal TT for directly attached FS/LS devices. If the Hub Address in the QH or siTD does not match this address then the packet will be broadcast on the High Speed ports destined for a downstream High Speed hub with the address in the QH/siTD. In silicon RTL, this entry only affects QH and siTD, and the hub.addr at both QH and siTD are 0 in ehci core for chipidea (with hcd->has_tt = 1). So, for QH, if the "usage_tt" flag at RTL is 0, set CI_HDRC_SET_NON_ZERO_TTHA will not affect QH (with non-hs device); for siTD, set this flag will change remaining space requirement for the last transaction from 1023 bytes to 188 bytes, it can increase the number of transactions within one frame, ehci periodic schedule code will not queue the packet if the frame space is full, so it is safe to set this flag for siTD. With this flag, it can fix the problem Alan Stern reported below: http://www.spinics.net/lists/linux-usb/msg123125.html And may fix Michael Tessier's problem too. http://www.spinics.net/lists/linux-usb/msg118679.html CC: stern@rowland.harvard.edu CC: michael.tessier@axiontech.ca Signed-off-by: Peter Chen <peter.chen@freescale.com> 
The register of ttctrl.ttha describes like below:
- Internal TT Hub Address Representation
- RW
- Default = 0000000b
This field is used to match against the Hub Address field in QH & siTD
to determine if the packet is routed to the internal TT for directly
attached FS/LS devices. If the Hub Address in the QH or siTD does not
match this address then the packet will be broadcast on the High Speed
ports destined for a downstream High Speed hub with the address in the QH/siTD.

In silicon RTL, this entry only affects QH and siTD, and the hub.addr at
both QH and siTD are 0 in ehci core for chipidea (with hcd->has_tt = 1).

So, for QH, if the "usage_tt" flag at RTL is 0, set CI_HDRC_SET_NON_ZERO_TTHA
will not affect QH (with non-hs device); for siTD, set this flag
will change remaining space requirement for the last transaction from 1023
bytes to 188 bytes, it can increase the number of transactions within one
frame, ehci periodic schedule code will not queue the packet if the frame space
is full, so it is safe to set this flag for siTD.

With this flag, it can fix the problem Alan Stern reported below:
http://www.spinics.net/lists/linux-usb/msg123125.html
And may fix Michael Tessier's problem too.
http://www.spinics.net/lists/linux-usb/msg118679.html

CC: stern@rowland.harvard.edu
CC: michael.tessier@axiontech.ca
Signed-off-by: Peter Chen <peter.chen@freescale.com>
usb: chipidea: support runtime power management for otg fsm mode 2015-03-18T15:19:12+00:00 Li Jun b47624@freescale.com 2015-02-11T04:45:03+00:00 961ea496facda611eeb153d8133a4d40055e56ca This patch adds runtime power management support for otg fsm mode, since A-device in a_idle state cannot detect data pulse irq after suspended, here enable wakeup by connection before suspend to make it can be resumed by DP; and handle wakeup from that state like SRP. Signed-off-by: Li Jun <jun.li@freescale.com> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This patch adds runtime power management support for otg fsm mode, since
A-device in a_idle state cannot detect data pulse irq after suspended, here
enable wakeup by connection before suspend to make it can be resumed by DP;
and handle wakeup from that state like SRP.

Signed-off-by: Li Jun <jun.li@freescale.com>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: chipidea: add chipidea revision information 2015-03-18T15:19:10+00:00 Peter Chen peter.chen@freescale.com 2015-02-11T04:44:55+00:00 cb271f3ce969a0fc4ecf9fc4b5a28852509714ed Define ci_get_revision API to know the controller revision information according to chipidea 1.1a, 2.0a and 2.5a spec. Besides, add one entry at struct ci_hdrc to indicate revision information, it can be used for adding different code for revisions, eg kinds of errata. Reviewed-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Define ci_get_revision API to know the controller revision
information according to chipidea 1.1a, 2.0a and 2.5a spec.
Besides, add one entry at struct ci_hdrc to indicate revision
information, it can be used for adding different code for
revisions, eg kinds of errata.

Reviewed-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: chipidea: OTG fsm timers initialization 2014-04-24T19:56:35+00:00 Li Jun b47624@freescale.com 2014-04-23T07:56:49+00:00 e287b67b00c8d5306e0fe6be1d597e23d8c4783e This patch adds OTG fsm timers initialization, which use controller's 1ms interrupt as timeout counter, also adds some local timers which are not in otg_fsm_timer list. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Li Jun <b47624@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This patch adds OTG fsm timers initialization, which use controller's 1ms
interrupt as timeout counter, also adds some local timers which are not
in otg_fsm_timer list.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Li Jun <b47624@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: chipidea: add OTG fsm operation functions implementation 2014-04-24T19:56:35+00:00 Li Jun B47624@freescale.com 2014-04-23T07:56:48+00:00 826cfe751f3e1faf4a63b65245f5ee3a7efeb763 Add OTG HNP and SRP operation functions implementation: - charge vbus - drive vbus - connection signaling - drive sof - start data pulse - add fsm timer - delete fsm timer - start host - start gadget Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Li Jun <b47624@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Add OTG HNP and SRP operation functions implementation:
- charge vbus
- drive vbus
- connection signaling
- drive sof
- start data pulse
- add fsm timer
- delete fsm timer
- start host
- start gadget

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Li Jun <b47624@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: chipidea: udc: add maximum-speed = full-speed option 2014-02-25T01:07:52+00:00 Michael Grzeschik m.grzeschik@pengutronix.de 2014-02-19T05:41:43+00:00 4f6743d5ca97ac66831add302cc5467db4ee3809 This patch makes it possible to set the chipidea udc into full-speed only mode. It is set by the oftree property "maximum-speed = full-speed". Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This patch makes it possible to set the chipidea udc into full-speed only mode.
It is set by the oftree property "maximum-speed = full-speed".

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: chipidea: add ci_hdrc_enter_lpm API 2013-10-01T01:54:07+00:00 Peter Chen peter.chen@freescale.com 2013-09-24T04:47:55+00:00 864cf949981754c53de0a2efdc6c542c51d61328 This API is used to let the PHY enter/leave low power mode. Before the controller going to work(at probe/resume), it needs to let the PHY leave low power mode. After the controller stopping working(at remove/suspend), it needs to let the PHY enter low power mode to save power consumption. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This API is used to let the PHY enter/leave low power mode.
Before the controller going to work(at probe/resume), it needs to let
the PHY leave low power mode.
After the controller stopping working(at remove/suspend), it needs to
let the PHY enter low power mode to save power consumption.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: chipidea: otg: add otg file used to access otgsc 2013-08-14T19:37:19+00:00 Peter Chen peter.chen@freescale.com 2013-08-14T09:44:06+00:00 c10b4f033e7c0ddba2b7b699d01109e4de46e831 This file is mainly used to access otgsc currently, it may add otg related things in the future. Tested-by: Marek Vasut <marex@denx.de> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This file is mainly used to access otgsc currently, it may
add otg related things in the future.

Tested-by: Marek Vasut <marex@denx.de>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>