linux-toradex.git/drivers/usb/chipidea, branch v5.14 Linux kernel for Apalis and Colibri modules Merge tag 'v5.13-rc7' into usb-next 2021-06-21T08:56:05+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2021-06-21T08:56:05+00:00 cfb0276373dfb5dccef0f60df0d1f7c0328918a7 We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
We need the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: chipidea: imx: Fix Battery Charger 1.2 CDP detection 2021-06-16T01:04:22+00:00 Breno Lima breno.lima@nxp.com 2021-06-14T17:50:13+00:00 c6d580d96f140596d69220f60ce0cfbea4ee5c0f i.MX8MM cannot detect certain CDP USB HUBs. usbmisc_imx.c driver is not following CDP timing requirements defined by USB BC 1.2 specification and section 3.2.4 Detection Timing CDP. During Primary Detection the i.MX device should turn on VDP_SRC and IDM_SINK for a minimum of 40ms (TVDPSRC_ON). After a time of TVDPSRC_ON, the i.MX is allowed to check the status of the D- line. Current implementation is waiting between 1ms and 2ms, and certain BC 1.2 complaint USB HUBs cannot be detected. Increase delay to 40ms allowing enough time for primary detection. During secondary detection the i.MX is required to disable VDP_SRC and IDM_SNK, and enable VDM_SRC and IDP_SINK for at least 40ms (TVDMSRC_ON). Current implementation is not disabling VDP_SRC and IDM_SNK, introduce disable sequence in imx7d_charger_secondary_detection() function. VDM_SRC and IDP_SINK should be enabled for at least 40ms (TVDMSRC_ON). Increase delay allowing enough time for detection. Cc: <stable@vger.kernel.org> Fixes: 746f316b753a ("usb: chipidea: introduce imx7d USB charger detection") Signed-off-by: Breno Lima <breno.lima@nxp.com> Signed-off-by: Jun Li <jun.li@nxp.com> Link: https://lore.kernel.org/r/20210614175013.495808-1-breno.lima@nxp.com Signed-off-by: Peter Chen <peter.chen@kernel.org> 
i.MX8MM cannot detect certain CDP USB HUBs. usbmisc_imx.c driver is not
following CDP timing requirements defined by USB BC 1.2 specification
and section 3.2.4 Detection Timing CDP.

During Primary Detection the i.MX device should turn on VDP_SRC and
IDM_SINK for a minimum of 40ms (TVDPSRC_ON). After a time of TVDPSRC_ON,
the i.MX is allowed to check the status of the D- line. Current
implementation is waiting between 1ms and 2ms, and certain BC 1.2
complaint USB HUBs cannot be detected. Increase delay to 40ms allowing
enough time for primary detection.

During secondary detection the i.MX is required to disable VDP_SRC and
IDM_SNK, and enable VDM_SRC and IDP_SINK for at least 40ms (TVDMSRC_ON).

Current implementation is not disabling VDP_SRC and IDM_SNK, introduce
disable sequence in imx7d_charger_secondary_detection() function.

VDM_SRC and IDP_SINK should be enabled for at least 40ms (TVDMSRC_ON).
Increase delay allowing enough time for detection.

Cc: <stable@vger.kernel.org>
Fixes: 746f316b753a ("usb: chipidea: introduce imx7d USB charger detection")
Signed-off-by: Breno Lima <breno.lima@nxp.com>
Signed-off-by: Jun Li <jun.li@nxp.com>
Link: https://lore.kernel.org/r/20210614175013.495808-1-breno.lima@nxp.com
Signed-off-by: Peter Chen <peter.chen@kernel.org>
Merge 5.13-rc4 into usb-next 2021-05-31T07:50:26+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2021-05-31T07:50:26+00:00 aa10fab0f859ef86e998ee1cdaa89fc8e542e2c9 We need the usb/thunderbolt fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
We need the usb/thunderbolt fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: chipidea: udc: Fix incorrectly documented function 'hw_port_is_high_speed()' 2021-05-27T07:43:45+00:00 Lee Jones lee.jones@linaro.org 2021-05-26T13:00:29+00:00 9b3c1c90d6e76b6ef0412aef893b8afc0b0b8b4c Fixes the following W=1 kernel build warning(s): drivers/usb/chipidea/udc.c:247: warning: expecting prototype for hw_is_port_high_speed(). Prototype was for hw_port_is_high_speed() instead Cc: Peter Chen <peter.chen@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210526130037.856068-17-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Fixes the following W=1 kernel build warning(s):

 drivers/usb/chipidea/udc.c:247: warning: expecting prototype for hw_is_port_high_speed(). Prototype was for hw_port_is_high_speed() instead

Cc: Peter Chen <peter.chen@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210526130037.856068-17-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: chipidea: otg: Fix formatting and missing documentation issues 2021-05-27T07:43:44+00:00 Lee Jones lee.jones@linaro.org 2021-05-26T13:00:27+00:00 953c3a3c310ff4961c4b37f5f4db557cb83eeba7 Fixes the following W=1 kernel build warning(s): drivers/usb/chipidea/otg.c:25: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/usb/chipidea/otg.c:78: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/usb/chipidea/otg.c:143: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Cc: Peter Chen <peter.chen@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210526130037.856068-15-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Fixes the following W=1 kernel build warning(s):

 drivers/usb/chipidea/otg.c:25: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 drivers/usb/chipidea/otg.c:78: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 drivers/usb/chipidea/otg.c:143: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst

Cc: Peter Chen <peter.chen@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210526130037.856068-15-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: chipidea: core: Fix incorrectly documented function 'ci_usb_phy_exit()' 2021-05-27T07:43:44+00:00 Lee Jones lee.jones@linaro.org 2021-05-26T13:00:26+00:00 b1f562f1c40151ae59c7b81ae6e361777ad31989 Fixes the following W=1 kernel build warning(s): drivers/usb/chipidea/core.c:343: warning: expecting prototype for _ci_usb_phy_exit(). Prototype was for ci_usb_phy_exit() instead Cc: Peter Chen <peter.chen@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: David Lopo <dlopo@chipidea.mips.com> Cc: linux-usb@vger.kernel.org Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210526130037.856068-14-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Fixes the following W=1 kernel build warning(s):

 drivers/usb/chipidea/core.c:343: warning: expecting prototype for _ci_usb_phy_exit(). Prototype was for ci_usb_phy_exit() instead

Cc: Peter Chen <peter.chen@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: David Lopo <dlopo@chipidea.mips.com>
Cc: linux-usb@vger.kernel.org
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210526130037.856068-14-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: chipidea: remove dentry storage for debugfs file 2021-05-27T07:34:34+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2021-05-25T17:14:19+00:00 8f6c7c5a11ec599be524190122a56dbb730069a3 There is no need to store the dentry pointer for a debugfs file that we only use to remove it when the device goes away. debugfs can do the lookup for us instead, saving us some trouble, and making things smaller overall. Cc: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20210525171419.758146-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
There is no need to store the dentry pointer for a debugfs file that we
only use to remove it when the device goes away.  debugfs can do the
lookup for us instead, saving us some trouble, and making things smaller
overall.

Cc: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20210525171419.758146-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: chipidea: udc: assign interrupt number to USB gadget structure 2021-05-17T02:04:05+00:00 Li Jun jun.li@nxp.com 2021-05-14T10:59:44+00:00 9e3927f6373da54cb17e17f4bd700907e1123d2f Chipidea also need sync interrupt before unbind the udc while gadget remove driver, otherwise setup irq handling may happen while unbind, see below dump generated from android function switch stress test: [ 4703.503056] android_work: sent uevent USB_STATE=CONNECTED [ 4703.514642] android_work: sent uevent USB_STATE=DISCONNECTED [ 4703.651339] android_work: sent uevent USB_STATE=CONNECTED [ 4703.661806] init: Control message: Processed ctl.stop for 'adbd' from pid: 561 (system_server) [ 4703.673469] init: processing action (init.svc.adbd=stopped) from (/system/etc/init/hw/init.usb.configfs.rc:14) [ 4703.676451] Unable to handle kernel read from unreadable memory at virtual address 0000000000000090 [ 4703.676454] Mem abort info: [ 4703.676458] ESR = 0x96000004 [ 4703.676461] EC = 0x25: DABT (current EL), IL = 32 bits [ 4703.676464] SET = 0, FnV = 0 [ 4703.676466] EA = 0, S1PTW = 0 [ 4703.676468] Data abort info: [ 4703.676471] ISV = 0, ISS = 0x00000004 [ 4703.676473] CM = 0, WnR = 0 [ 4703.676478] user pgtable: 4k pages, 48-bit VAs, pgdp=000000004a867000 [ 4703.676481] [0000000000000090] pgd=0000000000000000, p4d=0000000000000000 [ 4703.676503] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 4703.758297] Modules linked in: synaptics_dsx_i2c moal(O) mlan(O) [ 4703.764327] CPU: 0 PID: 235 Comm: lmkd Tainted: G W O 5.10.9-00001-g3f5fd8487c38-dirty #63 [ 4703.773720] Hardware name: NXP i.MX8MNano EVK board (DT) [ 4703.779033] pstate: 60400085 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 4703.785046] pc : _raw_write_unlock_bh+0xc0/0x2c8 [ 4703.789667] lr : android_setup+0x4c/0x168 [ 4703.793676] sp : ffff80001256bd80 [ 4703.796989] x29: ffff80001256bd80 x28: 00000000000000a8 [ 4703.802304] x27: ffff800012470000 x26: ffff80006d923000 [ 4703.807616] x25: ffff800012471000 x24: ffff00000b091140 [ 4703.812929] x23: ffff0000077dbd38 x22: ffff0000077da490 [ 4703.818242] x21: ffff80001256be30 x20: 0000000000000000 [ 4703.823554] x19: 0000000000000080 x18: ffff800012561048 [ 4703.828867] x17: 0000000000000000 x16: 0000000000000039 [ 4703.834180] x15: ffff8000106ad258 x14: ffff80001194c277 [ 4703.839493] x13: 0000000000003934 x12: 0000000000000000 [ 4703.844805] x11: 0000000000000000 x10: 0000000000000001 [ 4703.850117] x9 : 0000000000000000 x8 : 0000000000000090 [ 4703.855429] x7 : 6f72646e61203a70 x6 : ffff8000124f2450 [ 4703.860742] x5 : ffffffffffffffff x4 : 0000000000000009 [ 4703.866054] x3 : ffff8000108a290c x2 : ffff00007fb3a9c8 [ 4703.871367] x1 : 0000000000000000 x0 : 0000000000000090 [ 4703.876681] Call trace: [ 4703.879129] _raw_write_unlock_bh+0xc0/0x2c8 [ 4703.883397] android_setup+0x4c/0x168 [ 4703.887059] udc_irq+0x824/0xa9c [ 4703.890287] ci_irq+0x124/0x148 [ 4703.893429] __handle_irq_event_percpu+0x84/0x268 [ 4703.898131] handle_irq_event+0x64/0x14c [ 4703.902054] handle_fasteoi_irq+0x110/0x210 [ 4703.906236] __handle_domain_irq+0x8c/0xd4 [ 4703.910332] gic_handle_irq+0x6c/0x124 [ 4703.914081] el1_irq+0xdc/0x1c0 [ 4703.917221] _raw_spin_unlock_irq+0x20/0x54 [ 4703.921405] finish_task_switch+0x84/0x224 [ 4703.925502] __schedule+0x4a4/0x734 [ 4703.928990] schedule+0xa0/0xe8 [ 4703.932132] do_notify_resume+0x150/0x184 [ 4703.936140] work_pending+0xc/0x40c [ 4703.939633] Code: d5384613 521b0a69 d5184609 f9800111 (885ffd01) [ 4703.945732] ---[ end trace ba5c1875ae49d53c ]--- [ 4703.950350] Kernel panic - not syncing: Oops: Fatal exception in interrupt [ 4703.957223] SMP: stopping secondary CPUs [ 4703.961151] Kernel Offset: disabled [ 4703.964638] CPU features: 0x0240002,2000200c [ 4703.968905] Memory Limit: none [ 4703.971963] Rebooting in 5 seconds.. Tested-by: faqiang.zhu <faqiang.zhu@nxp.com> Signed-off-by: Li Jun <jun.li@nxp.com> Link: https://lore.kernel.org/r/1620989984-7653-1-git-send-email-jun.li@nxp.com Signed-off-by: Peter Chen <peter.chen@kernel.org> 
Chipidea also need sync interrupt before unbind the udc while
gadget remove driver, otherwise setup irq handling may happen
while unbind, see below dump generated from android function
switch stress test:

[ 4703.503056] android_work: sent uevent USB_STATE=CONNECTED
[ 4703.514642] android_work: sent uevent USB_STATE=DISCONNECTED
[ 4703.651339] android_work: sent uevent USB_STATE=CONNECTED
[ 4703.661806] init: Control message: Processed ctl.stop for 'adbd' from pid: 561 (system_server)
[ 4703.673469] init: processing action (init.svc.adbd=stopped) from (/system/etc/init/hw/init.usb.configfs.rc:14)
[ 4703.676451] Unable to handle kernel read from unreadable memory at virtual address 0000000000000090
[ 4703.676454] Mem abort info:
[ 4703.676458]   ESR = 0x96000004
[ 4703.676461]   EC = 0x25: DABT (current EL), IL = 32 bits
[ 4703.676464]   SET = 0, FnV = 0
[ 4703.676466]   EA = 0, S1PTW = 0
[ 4703.676468] Data abort info:
[ 4703.676471]   ISV = 0, ISS = 0x00000004
[ 4703.676473]   CM = 0, WnR = 0
[ 4703.676478] user pgtable: 4k pages, 48-bit VAs, pgdp=000000004a867000
[ 4703.676481] [0000000000000090] pgd=0000000000000000, p4d=0000000000000000
[ 4703.676503] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[ 4703.758297] Modules linked in: synaptics_dsx_i2c moal(O) mlan(O)
[ 4703.764327] CPU: 0 PID: 235 Comm: lmkd Tainted: G        W  O      5.10.9-00001-g3f5fd8487c38-dirty #63
[ 4703.773720] Hardware name: NXP i.MX8MNano EVK board (DT)
[ 4703.779033] pstate: 60400085 (nZCv daIf +PAN -UAO -TCO BTYPE=--)
[ 4703.785046] pc : _raw_write_unlock_bh+0xc0/0x2c8
[ 4703.789667] lr : android_setup+0x4c/0x168
[ 4703.793676] sp : ffff80001256bd80
[ 4703.796989] x29: ffff80001256bd80 x28: 00000000000000a8
[ 4703.802304] x27: ffff800012470000 x26: ffff80006d923000
[ 4703.807616] x25: ffff800012471000 x24: ffff00000b091140
[ 4703.812929] x23: ffff0000077dbd38 x22: ffff0000077da490
[ 4703.818242] x21: ffff80001256be30 x20: 0000000000000000
[ 4703.823554] x19: 0000000000000080 x18: ffff800012561048
[ 4703.828867] x17: 0000000000000000 x16: 0000000000000039
[ 4703.834180] x15: ffff8000106ad258 x14: ffff80001194c277
[ 4703.839493] x13: 0000000000003934 x12: 0000000000000000
[ 4703.844805] x11: 0000000000000000 x10: 0000000000000001
[ 4703.850117] x9 : 0000000000000000 x8 : 0000000000000090
[ 4703.855429] x7 : 6f72646e61203a70 x6 : ffff8000124f2450
[ 4703.860742] x5 : ffffffffffffffff x4 : 0000000000000009
[ 4703.866054] x3 : ffff8000108a290c x2 : ffff00007fb3a9c8
[ 4703.871367] x1 : 0000000000000000 x0 : 0000000000000090
[ 4703.876681] Call trace:
[ 4703.879129]  _raw_write_unlock_bh+0xc0/0x2c8
[ 4703.883397]  android_setup+0x4c/0x168
[ 4703.887059]  udc_irq+0x824/0xa9c
[ 4703.890287]  ci_irq+0x124/0x148
[ 4703.893429]  __handle_irq_event_percpu+0x84/0x268
[ 4703.898131]  handle_irq_event+0x64/0x14c
[ 4703.902054]  handle_fasteoi_irq+0x110/0x210
[ 4703.906236]  __handle_domain_irq+0x8c/0xd4
[ 4703.910332]  gic_handle_irq+0x6c/0x124
[ 4703.914081]  el1_irq+0xdc/0x1c0
[ 4703.917221]  _raw_spin_unlock_irq+0x20/0x54
[ 4703.921405]  finish_task_switch+0x84/0x224
[ 4703.925502]  __schedule+0x4a4/0x734
[ 4703.928990]  schedule+0xa0/0xe8
[ 4703.932132]  do_notify_resume+0x150/0x184
[ 4703.936140]  work_pending+0xc/0x40c
[ 4703.939633] Code: d5384613 521b0a69 d5184609 f9800111 (885ffd01)
[ 4703.945732] ---[ end trace ba5c1875ae49d53c ]---
[ 4703.950350] Kernel panic - not syncing: Oops: Fatal exception in interrupt
[ 4703.957223] SMP: stopping secondary CPUs
[ 4703.961151] Kernel Offset: disabled
[ 4703.964638] CPU features: 0x0240002,2000200c
[ 4703.968905] Memory Limit: none
[ 4703.971963] Rebooting in 5 seconds..

Tested-by: faqiang.zhu <faqiang.zhu@nxp.com>
Signed-off-by: Li Jun <jun.li@nxp.com>
Link: https://lore.kernel.org/r/1620989984-7653-1-git-send-email-jun.li@nxp.com
Signed-off-by: Peter Chen <peter.chen@kernel.org>
usb: chipidea: tegra: Silence deferred probe error 2021-03-23T11:50:32+00:00 Dmitry Osipenko digetx@gmail.com 2021-03-14T20:39:27+00:00 fb9b31e4ea2f55fc3acee29f30c7c65460df8996 Silence deferred probe error caused by the PHY driver which is probed later than the ChipIdea driver. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20210314203927.2572-1-digetx@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Silence deferred probe error caused by the PHY driver which is probed
later than the ChipIdea driver.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210314203927.2572-1-digetx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: chipidea: tegra: fix flexible_array.cocci warnings 2021-03-10T08:37:15+00:00 kernel test robot lkp@intel.com 2021-02-13T20:09:55+00:00 4294a8c2b8db914b029801cf2a2ba438e8785714 Zero-length and one-element arrays are deprecated, see Documentation/process/deprecated.rst Flexible-array members should be used instead. Generated by: scripts/coccinelle/misc/flexible_array.cocci Fixes: fc53d5279094 ("usb: chipidea: tegra: Support host mode") CC: Peter Geis <pgwipeout@gmail.com> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: kernel test robot <lkp@intel.com> Signed-off-by: Julia Lawall <julia.lawall@inria.fr> Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2102132108040.2720@hadrien Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Zero-length and one-element arrays are deprecated, see
Documentation/process/deprecated.rst
Flexible-array members should be used instead.

Generated by: scripts/coccinelle/misc/flexible_array.cocci

Fixes: fc53d5279094 ("usb: chipidea: tegra: Support host mode")
CC: Peter Geis <pgwipeout@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2102132108040.2720@hadrien
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>