linux-toradex.git/drivers/usb/class, branch v6.6-rc5

Merge tag 'tty-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2023-09-01T16:38:00+00:00

Pull tty/serial driver updates from Greg KH:
 "Here is the big set of tty and serial driver changes for 6.6-rc1.

  Lots of cleanups in here this cycle, and some driver updates. Short
  summary is:

   - Jiri's continued work to make the tty code and apis be a bit more
     sane with regards to modern kernel coding style and types

   - cpm_uart driver updates

   - n_gsm updates and fixes

   - meson driver updates

   - sc16is7xx driver updates

   - 8250 driver updates for different hardware types

   - qcom-geni driver fixes

   - tegra serial driver change

   - stm32 driver updates

   - synclink_gt driver cleanups

   - tty structure size reduction

  All of these have been in linux-next this week with no reported
  issues. The last bit of cleanups from Jiri and the tty structure size
  reduction came in last week, a bit late but as they were just style
  changes and size reductions, I figured they should get into this merge
  cycle so that others can work on top of them with no merge conflicts"

* tag 'tty-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits)
  tty: shrink the size of struct tty_struct by 40 bytes
  tty: n_tty: deduplicate copy code in n_tty_receive_buf_real_raw()
  tty: n_tty: extract ECHO_OP processing to a separate function
  tty: n_tty: unify counts to size_t
  tty: n_tty: use u8 for chars and flags
  tty: n_tty: simplify chars_in_buffer()
  tty: n_tty: remove unsigned char casts from character constants
  tty: n_tty: move newline handling to a separate function
  tty: n_tty: move canon handling to a separate function
  tty: n_tty: use MASK() for masking out size bits
  tty: n_tty: make n_tty_data::num_overrun unsigned
  tty: n_tty: use time_is_before_jiffies() in n_tty_receive_overrun()
  tty: n_tty: use 'num' for writes' counts
  tty: n_tty: use output character directly
  tty: n_tty: make flow of n_tty_receive_buf_common() a bool
  Revert "tty: serial: meson: Add a earlycon for the T7 SoC"
  Documentation: devices.txt: Fix minors for ttyCPM*
  Documentation: devices.txt: Remove ttySIOC*
  Documentation: devices.txt: Remove ttyIOC*
  serial: 8250_bcm7271: improve bcm7271 8250 port
  ...

USB: cdc-acm: support flushing write buffers (TCOFLUSH)

2023-08-22T12:46:11+00:00

If the serial device never reads data written to it (because it is "output
only") then the write buffers will still be waiting for the URB to complete
on close(), which will hang for 30s until the closing_wait timeout expires.

This can happen with the ESP32-H2/ESP32-C6 USB serial interface. Changing
the port closing_wait timeout is a privileged operation but flushing the
output buffer is not a privileged operation.

Implement the flush_buffer tty operation to cancel in-progress writes so
that tcflush(fd, TCOFLUSH) can be used to unblock the serial port before
close.

Signed-off-by: Simon Arlott 
Link: https://lore.kernel.org/r/555fbc4c-043b-8932-fb9b-a208d61ffbe4@0882a8b5-c6c3-11e9-b005-00805fc181fe.uuid.home.arpa
Signed-off-by: Greg Kroah-Hartman

usb: cdc-acm: move ldisc dcd notification outside of acm's read lock

2023-08-22T12:45:02+00:00

dcd_change notification call moved outside of the acm->read_lock
to protect any future tty ldisc that calls wait_serial_change()

Signed-off-by: Dan Drown 
Acked-by: Oliver Neukum 
Link: https://lore.kernel.org/r/ZN1zV/zjPgpGlHXo@vps3.drown.org
Signed-off-by: Greg Kroah-Hartman

tty: make tty_operations::write()'s count size_t

2023-08-11T19:12:46+00:00

Unify with the rest of the code. Use size_t for counts and ssize_t for
retval.

Signed-off-by: "Jiri Slaby (SUSE)" 
Link: https://lore.kernel.org/r/20230810091510.13006-30-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman

tty: propagate u8 data to tty_operations::write()

2023-08-11T19:12:46+00:00

Data are now typed as u8. Propagate this change to
tty_operations::write().

Signed-off-by: "Jiri Slaby (SUSE)" 
Cc: Richard Henderson 
Cc: Ivan Kokshaysky 
Cc: Matt Turner 
Cc: Geert Uytterhoeven 
Cc: Richard Weinberger 
Cc: Anton Ivanov 
Cc: Johannes Berg 
Cc: Chris Zankel 
Cc: Max Filippov 
Cc: Arnd Bergmann 
Cc: Vaibhav Gupta 
Cc: Jens Taprogge 
Cc: Karsten Keil 
Cc: Scott Branden 
Cc: Ulf Hansson 
Cc: "David S. Miller" 
Cc: Eric Dumazet 
Cc: Jakub Kicinski 
Cc: Paolo Abeni 
Cc: Heiko Carstens 
Cc: Vasily Gorbik 
Cc: Alexander Gordeev 
Cc: Christian Borntraeger 
Cc: Sven Schnelle 
Cc: David Lin 
Cc: Johan Hovold 
Cc: Alex Elder 
Cc: Laurentiu Tudor 
Cc: Jiri Kosina 
Cc: David Sterba 
Cc: Shawn Guo 
Cc: Sascha Hauer 
Cc: Pengutronix Kernel Team 
Cc: Fabio Estevam 
Cc: NXP Linux Team 
Cc: Arnaud Pouliquen 
Cc: Oliver Neukum 
Cc: Mathias Nyman 
Cc: Marcel Holtmann 
Cc: Johan Hedberg 
Cc: Luiz Augusto von Dentz 
Link: https://lore.kernel.org/r/20230810091510.13006-28-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman

usb: cdc-acm: add PPS support

2023-08-08T08:36:05+00:00

This patch adds support for PPS to CDC devices. Changes to the DCD pin
are monitored and passed to the ldisc system, which is used by
pps-ldisc.

Signed-off-by: Dan Drown 
Link: https://lore.kernel.org/r/ZM8ExV6bAvJtIA1d@vps3.drown.org
Signed-off-by: Greg Kroah-Hartman

USB: usbtmc: Fix direction for 0-length ioctl control messages

2023-05-13T08:25:49+00:00

The syzbot fuzzer found a problem in the usbtmc driver: When a user
submits an ioctl for a 0-length control transfer, the driver does not
check that the direction is set to OUT:

------------[ cut here ]------------
usb 3-1: BOGUS control dir, pipe 80000b80 doesn't match bRequestType fd
WARNING: CPU: 0 PID: 5100 at drivers/usb/core/urb.c:411 usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411
Modules linked in:
CPU: 0 PID: 5100 Comm: syz-executor428 Not tainted 6.3.0-syzkaller-12049-g58390c8ce1bd #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/14/2023
RIP: 0010:usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411
Code: 7c 24 40 e8 1b 13 5c fb 48 8b 7c 24 40 e8 21 1d f0 fe 45 89 e8 44 89 f1 4c 89 e2 48 89 c6 48 c7 c7 e0 b5 fc 8a e8 19 c8 23 fb <0f> 0b e9 9f ee ff ff e8 ed 12 5c fb 0f b6 1d 12 8a 3c 08 31 ff 41
RSP: 0018:ffffc90003d2fb00 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff8880789e9058 RCX: 0000000000000000
RDX: ffff888029593b80 RSI: ffffffff814c1447 RDI: 0000000000000001
RBP: ffff88801ea742f8 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000001 R12: ffff88802915e528
R13: 00000000000000fd R14: 0000000080000b80 R15: ffff8880222b3100
FS:  0000555556ca63c0(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f9ef4d18150 CR3: 0000000073e5b000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 
 usb_start_wait_urb+0x101/0x4b0 drivers/usb/core/message.c:58
 usb_internal_control_msg drivers/usb/core/message.c:102 [inline]
 usb_control_msg+0x320/0x4a0 drivers/usb/core/message.c:153
 usbtmc_ioctl_request drivers/usb/class/usbtmc.c:1954 [inline]
 usbtmc_ioctl+0x1b3d/0x2840 drivers/usb/class/usbtmc.c:2097

To fix this, we must override the direction in the bRequestType field
of the control request structure when the length is 0.

Reported-and-tested-by: syzbot+ce77725b89b7bd52425c@syzkaller.appspotmail.com
Signed-off-by: Alan Stern 
Link: https://lore.kernel.org/linux-usb/000000000000716a3705f9adb8ee@google.com/
CC: 
Link: https://lore.kernel.org/r/ede1ee02-b718-49e7-a44c-51339fec706b@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman

wwan: core: Support slicing in port TX flow of WWAN subsystem

2023-03-18T05:38:31+00:00

wwan_port_fops_write inputs the SKB parameter to the TX callback of
the WWAN device driver. However, the WWAN device (e.g., t7xx) may
have an MTU less than the size of SKB, causing the TX buffer to be
sliced and copied once more in the WWAN device driver.

This patch implements the slicing in the WWAN subsystem and gives
the WWAN devices driver the option to slice(by frag_len) or not. By
doing so, the additional memory copy is reduced.

Meanwhile, this patch gives WWAN devices driver the option to reserve
headroom in fragments for the device-specific metadata.

Signed-off-by: haozhe chang 
Reviewed-by: Loic Poulain 
Link: https://lore.kernel.org/r/20230316095826.181904-1-haozhe.chang@mediatek.com
Signed-off-by: Jakub Kicinski

tty: Call ->dtr_rts() parameter active consistently

2023-01-19T15:04:35+00:00

Convert various parameter names for ->dtr_rts() and related functions
from onoff, on, and raise to active.

Reviewed-by: Jiri Slaby 
Acked-by: Ulf Hansson  # For MMC
Signed-off-by: Ilpo Järvinen 
Link: https://lore.kernel.org/r/20230117090358.4796-12-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman

tty: Convert ->dtr_rts() to take bool argument

2023-01-19T15:04:35+00:00

Convert the raise/on parameter in ->dtr_rts() to bool through the
callchain. The parameter is used like bool. In USB serial, there
remains a few implicit bool -> larger type conversions because some
devices use u8 in their control messages.

In moxa_tiocmget(), dtr variable was reused for line status which
requires int so use a separate variable for status.

Reviewed-by: Jiri Slaby 
Acked-by: Ulf Hansson  # For MMC
Signed-off-by: Ilpo Järvinen 
Link: https://lore.kernel.org/r/20230117090358.4796-8-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman