linux-toradex.git/drivers/usb/core/hcd.c, branch v6.12

move asm/unaligned.h to linux/unaligned.h

2024-10-02T21:23:23+00:00

asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.

auto-generated by the following:

for i in `git grep -l -w asm/unaligned.h`; do
	sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
	sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h

kcov, usb: disable interrupts in kcov_remote_start_usb_softirq

2024-06-04T13:34:44+00:00

After commit 8fea0c8fda30 ("usb: core: hcd: Convert from tasklet to BH
workqueue"), usb_giveback_urb_bh() runs in the BH workqueue with
interrupts enabled.

Thus, the remote coverage collection section in usb_giveback_urb_bh()->
__usb_hcd_giveback_urb() might be interrupted, and the interrupt handler
might invoke __usb_hcd_giveback_urb() again.

This breaks KCOV, as it does not support nested remote coverage collection
sections within the same context (neither in task nor in softirq).

Update kcov_remote_start/stop_usb_softirq() to disable interrupts for the
duration of the coverage collection section to avoid nested sections in
the softirq context (in addition to such in the task context, which are
already handled).

Reported-by: Tetsuo Handa 
Closes: https://lore.kernel.org/linux-usb/0f4d1964-7397-485b-bc48-11c01e2fcbca@I-love.SAKURA.ne.jp/
Closes: https://syzkaller.appspot.com/bug?extid=0438378d6f157baae1a2
Suggested-by: Alan Stern 
Fixes: 8fea0c8fda30 ("usb: core: hcd: Convert from tasklet to BH workqueue")
Cc: stable@vger.kernel.org
Acked-by: Dmitry Vyukov 
Signed-off-by: Andrey Konovalov 
Link: https://lore.kernel.org/r/20240527173538.4989-1-andrey.konovalov@linux.dev
Signed-off-by: Greg Kroah-Hartman

usb: core: Remove the useless struct usb_devmap which is just a bitmap

2024-05-04T16:23:03+00:00

struct usb_devmap is really just a bitmap. No need to have a dedicated
structure for that.

Simplify code and use DECLARE_BITMAP() directly instead.

Signed-off-by: Christophe JAILLET 
Acked-by: Alan Stern 
Link: https://lore.kernel.org/r/1d818575ff7a1e8317674aecf761ee23c89fdc84.1714815990.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2024-03-21T19:35:20+00:00

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt changes for 6.9-rc1. Lots
  of tiny changes and forward progress to support new hardware and
  better support for existing devices. Included in here are:

   - Thunderbolt (i.e. USB4) updates for newer hardware and uses as more
     people start to use the hardware

   - default USB authentication mode Kconfig and documentation update to
     make it more obvious what is going on

   - USB typec updates and enhancements

   - usual dwc3 driver updates

   - usual xhci driver updates

   - function USB (i.e. gadget) driver updates and additions

   - new device ids for lots of drivers

   - loads of other small updates, full details in the shortlog

  All of these, including a "last minute regression fix" have been in
  linux-next with no reported issues"

* tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (185 commits)
  usb: usb-acpi: Fix oops due to freeing uninitialized pld pointer
  usb: gadget: net2272: Use irqflags in the call to net2272_probe_fin
  usb: gadget: tegra-xudc: Fix USB3 PHY retrieval logic
  phy: tegra: xusb: Add API to retrieve the port number of phy
  USB: gadget: pxa27x_udc: Remove unused of_gpio.h
  usb: gadget/snps_udc_plat: Remove unused of_gpio.h
  usb: ohci-pxa27x: Remove unused of_gpio.h
  usb: sl811-hcd: only defined function checkdone if QUIRK2 is defined
  usb: Clarify expected behavior of dev_bin_attrs_are_visible()
  xhci: Allow RPM on the USB controller (1022:43f7) by default
  usb: isp1760: remove SLAB_MEM_SPREAD flag usage
  usb: misc: onboard_hub: use pointer consistently in the probe function
  usb: gadget: fsl: Increase size of name buffer for endpoints
  usb: gadget: fsl: Add of device table to enable module autoloading
  usb: typec: tcpm: add support to set tcpc connector orientatition
  usb: typec: tcpci: add generic tcpci fallback compatible
  dt-bindings: usb: typec-tcpci: add tcpci fallback binding
  usb: gadget: fsl-udc: Replace custom log wrappers by dev_{err,warn,dbg,vdbg}
  usb: core: Set connect_type of ports based on DT node
  dt-bindings: usb: Add downstream facing ports to realtek binding
  ...

usb: core: hcd: Convert from tasklet to BH workqueue

2024-02-05T23:22:38+00:00

The only generic interface to execute asynchronously in the BH context is
tasklet; however, it's marked deprecated and has some design flaws. To
replace tasklets, BH workqueue support was recently added. A BH workqueue
behaves similarly to regular workqueues except that the queued work items
are executed in the BH context.

This patch converts usb hcd from tasklet to BH workqueue.

Signed-off-by: Tejun Heo 
Acked-by: Greg Kroah-Hartman 
Cc: Alan Stern 
Cc: linux-usb@vger.kernel.org

usb: core: add phy notify connect and disconnect

2024-01-28T01:36:14+00:00

In Realtek SoC, the parameter of usb phy is designed to can dynamic
tuning base on port status. Therefore, add a notify callback of generic
phy driver when usb device connect and disconnect change.

The Realtek phy driver is designed to dynamically adjust disconnection
level and calibrate phy parameters. When the device connected bit changes
and when the disconnected bit changes, do connection change notification:

Check if portstatus is USB_PORT_STAT_CONNECTION and portchange is
USB_PORT_STAT_C_CONNECTION.
1. The device is connected, the driver lowers the disconnection level and
   calibrates the phy parameters.
2. The device disconnects, the driver increases the disconnect level and
   calibrates the phy parameters.

Generic phy driver in usb core framework does not support device connect
and disconnect notifications. Therefore, we add an api to notify phy
the connection changes.

Additionally, the generic phy only specifies primary_hcd in the original
design. Added specific "usb2-phy" on primary_hcd and "usb3-phy" on
shared_hcd.

Signed-off-by: Stanley Chang 
Link: https://lore.kernel.org/r/20231213031203.4911-4-stanley_chang@realtek.com
Signed-off-by: Greg Kroah-Hartman

usb: core: Make default authorization mode configurable

2024-01-28T01:35:49+00:00

Make the default USB device authorization mode configurable at build
time. This is useful for systems that require a mode that is stricter
than the standard setting, as it avoids relying on the kernel command
line being properly set.

Signed-off-by: Niko Mauno 
Link: https://lore.kernel.org/r/20240105114956.30714-2-niko.mauno@vaisala.com
Signed-off-by: Greg Kroah-Hartman

usb: core: Amend initial authorized_default value

2024-01-28T01:35:49+00:00

Since the wireless USB implementation has been removed and since the
behavior with authorized_default values -1 and 1 is now effectively
same, change the initial value to latter in order to stop using the
leftover value. The former value can still be passed as a module
parameter to retain backwards compatibility.

Signed-off-by: Niko Mauno 
Link: https://lore.kernel.org/r/20240105114956.30714-1-niko.mauno@vaisala.com
Signed-off-by: Greg Kroah-Hartman

USB: Remove remnants of Wireless USB and UWB

2023-08-09T12:17:06+00:00

Wireless USB has long been defunct, and kernel support for it was
removed in 2020 by commit caa6772db4c1 ("Staging: remove wusbcore and
UWB from the kernel tree.").

Nevertheless, some vestiges of the old implementation still clutter up
the USB subsystem and one or two other places.  Let's get rid of them
once and for all.

The only parts still left are the user-facing APIs in
include/uapi/linux/usb/ch9.h.  (There are also a couple of misleading
instances, such as the Sierra Wireless USB modem, which is a USB modem
made by Sierra Wireless.)

Signed-off-by: Alan Stern 
Link: https://lore.kernel.org/r/b4f2710f-a2de-4fb0-b50f-76776f3a961b@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman

USB: core: Change usb_get_device_descriptor() API

2023-08-08T08:45:32+00:00

The usb_get_device_descriptor() routine reads the device descriptor
from the udev device and stores it directly in udev->descriptor.  This
interface is error prone, because the USB subsystem expects in-memory
copies of a device's descriptors to be immutable once the device has
been initialized.

The interface is changed so that the device descriptor is left in a
kmalloc-ed buffer, not copied into the usb_device structure.  A
pointer to the buffer is returned to the caller, who is then
responsible for kfree-ing it.  The corresponding changes needed in the
various callers are fairly small.

Signed-off-by: Alan Stern 
Link: https://lore.kernel.org/r/d0111bb6-56c1-4f90-adf2-6cfe152f6561@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman