linux-toradex.git/drivers/usb/core/sysfs.c, branch v3.10.78 Linux kernel for Apalis and Colibri modules USB: remove CONFIG_USB_SUSPEND option 2013-03-28T18:10:22+00:00 Alan Stern stern@rowland.harvard.edu 2013-03-27T20:14:46+00:00 84ebc10294a3d7be4c66f51070b7aedbaa24de9b This patch (as1675) removes the CONFIG_USB_SUSPEND option, essentially replacing it everywhere with CONFIG_PM_RUNTIME (except for one place in hub.c, where it is replaced with CONFIG_PM because the code needs to be used in both runtime and system PM). The net result is code shrinkage and simplification. There's very little point in keeping CONFIG_USB_SUSPEND because almost everybody enables it. The few that don't will find that the usbcore module has gotten somewhat bigger and they will have to take active measures if they want to prevent hubs from being runtime suspended. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This patch (as1675) removes the CONFIG_USB_SUSPEND option, essentially
replacing it everywhere with CONFIG_PM_RUNTIME (except for one place
in hub.c, where it is replaced with CONFIG_PM because the code needs
to be used in both runtime and system PM).  The net result is code
shrinkage and simplification.

There's very little point in keeping CONFIG_USB_SUSPEND because almost
everybody enables it.  The few that don't will find that the usbcore
module has gotten somewhat bigger and they will have to take active
measures if they want to prevent hubs from being runtime suspended.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb/core: consider link speed while looking at bMaxPower 2013-01-12T00:16:01+00:00 Sebastian Andrzej Siewior bigeasy@linutronix.de 2012-12-18T14:25:46+00:00 8d8479db3dde3ef7a9bc803e565842764fa21a53 The USB 2.0 specification says that bMaxPower is the maximum power consumption expressed in 2 mA units and the USB 3.0 specification says that it is expressed in 8 mA units. This patch adds a helper function usb_get_max_power() which computes the value based on config & usb_device's speed value. The the device descriptor dump computes the value on its own. Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The USB 2.0 specification says that bMaxPower is the maximum power
consumption expressed in 2 mA units and the USB 3.0 specification says
that it is expressed in 8 mA units.
This patch adds a helper function usb_get_max_power() which computes the
value based on config & usb_device's speed value. The the device descriptor
dump computes the value on its own.

Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: convert USB_QUIRK_RESET_MORPHS to USB_QUIRK_RESET 2012-08-20T21:38:08+00:00 Lan Tianyu tianyu.lan@intel.com 2012-08-17T08:44:56+00:00 7fda953ffed1b94aa68f80c6c3ab312328aedcb3 Since the attribute avoid_reset_quirk is work for all devices including those devices that can't morph, convert USB_QUIRK_RESET_MORPHS to USB_QUIRK_RESET. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Since the attribute avoid_reset_quirk is work for all devices including
those devices that can't morph, convert USB_QUIRK_RESET_MORPHS to
USB_QUIRK_RESET.

Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: Rename temp variable "config" to "val" in the set_avoid_reset_quirk() 2012-08-10T19:06:39+00:00 Lan Tianyu tianyu.lan@intel.com 2012-08-03T08:30:35+00:00 7fc2cc320cd3e53954187d9cff8145f38ae4a015 In USB, the word "config" already has aseparate meaning. So it will cause confusion if use "config" as variable's name for other purposes. This patch is to convert the "config" to "val" Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
In USB, the word "config" already has aseparate meaning. So it will
cause confusion if use "config" as variable's name for other purposes.
This patch is to convert the "config"  to "val"

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: Add a sysfs file to show LTM capabilities. 2012-07-11T11:06:48+00:00 Sarah Sharp sarah.a.sharp@linux.intel.com 2012-07-06T00:17:24+00:00 024f117c2f3c4bb5df6e6696b709e0f3ed7e5dbb USB 3.0 devices can optionally support Latency Tolerance Messaging (LTM). Add a new sysfs file in the device directory to show whether a device is LTM capable. This file will be present for both USB 2.0 and USB 3.0 devices. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> 
USB 3.0 devices can optionally support Latency Tolerance Messaging
(LTM).  Add a new sysfs file in the device directory to show whether a
device is LTM capable.  This file will be present for both USB 2.0 and
USB 3.0 devices.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
USB: allow match on bInterfaceNumber 2012-06-13T22:40:09+00:00 Bjørn Mork bjorn@mork.no 2012-05-18T19:27:43+00:00 81df2d594340dcb6d1a02191976be88a1ca8120c Some composite USB devices provide multiple interfaces with different functions, all using "vendor-specific" for class/subclass/protocol. Another OS use interface numbers to match the driver and interface. It seems these devices are designed with that in mind - using static interface numbers for the different functions. This adds support for matching against the bInterfaceNumber, allowing such devices to be supported without having to resort to testing against interface number whitelists and/or blacklists in the probe. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Some composite USB devices provide multiple interfaces
with different functions, all using "vendor-specific"
for class/subclass/protocol.  Another OS use interface
numbers to match the driver and interface. It seems
these devices are designed with that in mind - using
static interface numbers for the different functions.

This adds support for matching against the
bInterfaceNumber, allowing such devices to be supported
without having to resort to testing against interface
number whitelists and/or blacklists in the probe.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sysfs: get rid of some lockdep false positives 2012-05-14T19:19:56+00:00 Alan Stern stern@rowland.harvard.edu 2012-05-14T17:30:03+00:00 356c05d58af05d582e634b54b40050c73609617b This patch (as1554) fixes a lockdep false-positive report. The problem arises because lockdep is unable to deal with the tree-structured locks created by the device core and sysfs. This particular problem involves a sysfs attribute method that unregisters itself, not from the device it was called for, but from a descendant device. Lockdep doesn't understand the distinction and reports a possible deadlock, even though the operation is safe. This is the sort of thing that would normally be handled by using a nested lock annotation; unfortunately it's not feasible to do that here. There's no sensible way to tell sysfs when attribute removal occurs in the context of a parent attribute method. As a workaround, the patch adds a new flag to struct attribute telling sysfs not to inform lockdep when it acquires a readlock on a sysfs_dirent instance for the attribute. The readlock is still acquired, but lockdep doesn't know about it and hence does not complain about impossible deadlock scenarios. Also added are macros for static initialization of attribute structures with the ignore_lockdep flag set. The three offending attributes in the USB subsystem are converted to use the new macros. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Tejun Heo <tj@kernel.org> CC: Eric W. Biederman <ebiederm@xmission.com> CC: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This patch (as1554) fixes a lockdep false-positive report.  The
problem arises because lockdep is unable to deal with the
tree-structured locks created by the device core and sysfs.

This particular problem involves a sysfs attribute method that
unregisters itself, not from the device it was called for, but from a
descendant device.  Lockdep doesn't understand the distinction and
reports a possible deadlock, even though the operation is safe.

This is the sort of thing that would normally be handled by using a
nested lock annotation; unfortunately it's not feasible to do that
here.  There's no sensible way to tell sysfs when attribute removal
occurs in the context of a parent attribute method.

As a workaround, the patch adds a new flag to struct attribute
telling sysfs not to inform lockdep when it acquires a readlock on a
sysfs_dirent instance for the attribute.  The readlock is still
acquired, but lockdep doesn't know about it and hence does not
complain about impossible deadlock scenarios.

Also added are macros for static initialization of attribute
structures with the ignore_lockdep flag set.  The three offending
attributes in the USB subsystem are converted to use the new macros.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Tejun Heo <tj@kernel.org>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: Add support for indicating whether a port is removable 2012-02-09T16:40:11+00:00 Matthew Garrett mjg@redhat.com 2012-02-03T22:11:54+00:00 0846e7e9856c0928223447d9349a877202a63f24 Userspace may want to make policy decisions based on whether or not a given USB device is removable. Add a per-device member and support for exposing it in sysfs. Information sources to populate it will be added later. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Userspace may want to make policy decisions based on whether or not a
given USB device is removable. Add a per-device member and support
for exposing it in sysfs. Information sources to populate it will be
added later.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
switch ->is_visible() to returning umode_t 2012-01-04T03:54:55+00:00 Al Viro viro@zeniv.linux.org.uk 2011-07-24T03:11:19+00:00 587a1f1659e8b330b8738ef4901832a2b63f0bed Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
usbcore: add sysfs support to xHCI usb2 hardware LPM 2011-09-26T22:51:10+00:00 Andiry Xu andiry.xu@amd.com 2011-09-23T21:19:53+00:00 c1045e87b2cd293d53dff19779ea46b19195d593 This patch adds sysfs support to xHCI usb2 hardware LPM, so developer can enable and disable usb2 hardware LPM manually for test purpose. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
This patch adds sysfs support to xHCI usb2 hardware LPM, so developer can
enable and disable usb2 hardware LPM manually for test purpose.

Signed-off-by: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>