linux-toradex.git/drivers/usb/core/usb.c, branch v2.6.15.2

[PATCH] usbcore: allow suspend/resume even if drivers don't support it

2005-12-21T22:46:35+00:00

This patch (as618) changes usbcore to prevent derailing the
suspend/resume sequence when a USB driver doesn't include support for
it.  This is a workaround rather than a true fix; the core needs to be
changed so that URB submissions from suspended drivers can be refused
and outstanding URBs cancelled.

Signed-off-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Linus Torvalds

[PATCH] USB: move CONFIG_USB_DEBUG checks into the Makefile

2005-11-17T19:29:55+00:00

This lets us remove a lot of code in the drivers that were all checking
the same thing.  It also found some bugs in a few of the drivers, which
has been fixed up.

Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Linus Torvalds

[PATCH] usbcore: Use kzalloc instead of kmalloc/memset

2005-10-28T23:47:51+00:00

This patch (as590) fixes up all the remaining places where usbcore can
use kzalloc rather than kmalloc/memset.

Signed-off-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman

[PATCH] USB: always export interface information for modalias

2005-10-28T23:47:48+00:00

This fixes a problem with some cdc acm devices that were not getting
automatically loaded as the module alias was not being reported
properly.

This check was for back in the days when we only reported hotplug events
for the main usb device, not the interfaces.  We should always give the
interface information for MODALIAS/modalias as it can be needed.

Signed-off-by: Greg Kroah-Hartman

[PATCH] root hub changes (lesser half)

2005-10-28T23:47:40+00:00

This patch collects various small updates related to root hubs, to shrink
later patches which build on them.

  - For root hub suspend/resume support:
     * Make the existing usb_hcd_resume_root_hub() routine respect pmcore
       locking, exporting and using the dpm_runtime_resume() method.
     * Add a new usb_hcd_suspend_root_hub() to pair with that routine.
       (Essential to make OHCI autosuspend behave again...)
     * HC_SUSPENDED by itself only refers to the root hub's downstream ports.
       So let HCDs see root hub URBs unless the parent device is suspended.

  - Remove an assertion we no longer need (and now, also don't want).

  - Generic suspend/resume updates to work better with swsusp.
     * Ignore the FREEZE vs SUSPEND distinction for hardware; trying to
       use it breaks the swsusp snapshots it's supposed to help (sigh).
     * On resume, mark devices as resumed right away, but then
       do nothing else if the device is marked NOTATTACHED.

These changes shouldn't be very noticable by themselves.

Signed-off-by: David Brownell 
Signed-off-by: Greg Kroah-Hartman 

 drivers/base/power/runtime.c |    1
 drivers/usb/core/hcd.c       |   64 ++++++++++++++++++++++++++++++++++++++-----
 drivers/usb/core/hcd.h       |    1
 drivers/usb/core/hub.c       |   45 ++++++++++++++++++++++++------
 drivers/usb/core/usb.c       |   20 +++++++++----
 drivers/usb/core/usb.h       |    1
 6 files changed, 111 insertions(+), 21 deletions(-)

[PATCH] remove usb_suspend_device() parameter

2005-10-28T23:47:38+00:00

This patch removes the extra usb_suspend_device() parameter.  The original
reason to pass that parameter was so that this routine could suspend any
active children.  A previous patch removed that functionality ... leaving
no reason to pass the parameter.  A close analogy is pci_set_power_state,
which doesn't need a pm_message_t either.

On the internal code path that comes through the driver model, the parameter
is now used to distinguish cases where USB devices need to "freeze" but not
suspend.   It also checks for an error case that's accessible through sysfs:
attempting to suspend a device before its interfaces (or for hubs, ports).

Signed-off-by: David Brownell 
Signed-off-by: Greg Kroah-Hartman 

 drivers/usb/core/hub.c         |   34 +++++++++++++++++++++-------------
 drivers/usb/core/usb.c         |   23 +++++++++++++++++++++--
 drivers/usb/host/ehci-hcd.c    |    2 +-
 drivers/usb/host/isp116x-hcd.c |    2 +-
 drivers/usb/host/ohci-pci.c    |    2 +-
 include/linux/usb.h            |    2 +-
 6 files changed, 46 insertions(+), 19 deletions(-)

[PATCH] usb_interface power state

2005-10-28T23:47:38+00:00

This updates the handling of power state for USB interfaces.

  - Formalizes an existing invariant:  interface "power state" is a boolean:
    ON when I/O is allowed, and FREEZE otherwise.  It does so by defining
    some inlined helpers, then using them.

  - Adds a useful invariant:  the only interfaces marked active are those
    bound to non-suspended drivers.  Later patches build on this invariant.

  - Simplifies the interface driver API (and removes some error paths) by
    removing the requirement that they record power state changes during
    suspend and resume callbacks.  Now usbcore does that.

A few drivers were simplified to address that last change.

Signed-off-by: David Brownell 
Signed-off-by: Greg Kroah-Hartman 

 drivers/usb/core/hub.c       |   33 +++++++++------------
 drivers/usb/core/message.c   |    1
 drivers/usb/core/usb.c       |   65 +++++++++++++++++++++++++++++++++----------
 drivers/usb/core/usb.h       |   18 +++++++++++
 drivers/usb/input/hid-core.c |    2 -
 drivers/usb/misc/usbtest.c   |   10 ------
 drivers/usb/net/pegasus.c    |    2 -
 drivers/usb/net/usbnet.c     |    2 -
 8 files changed, 85 insertions(+), 48 deletions(-)

[PATCH] gfp_t: drivers/usb

2005-10-28T15:16:49+00:00

Signed-off-by: Al Viro 
Signed-off-by: Linus Torvalds

[PATCH] driver core: add helper device_is_registered()

2005-09-22T14:58:24+00:00

add the helper and use it instead of open coding the klist_node_attached() check
(which is a layering violation IMHO)

idea by Alan Stern.

Signed-off-by: Daniel Ritz 
Cc: Alan Stern 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Linus Torvalds

[PATCH] USB: Support unbinding of the usb_generic driver

2005-09-08T23:28:22+00:00

This patch (as556) adds support for unbinding the usb_generic "driver".
That driver only binds to USB devices, as opposed to interfaces, and it
does nothing much besides marking which struct device's go with an
overall USB device plus providing suspend/resume methods.  Now that
users can unbind drivers at will using the sysfs "unbind" attribute, we
need a rational way of dealing with USB devices that are no longer under
full control of the USB stack.  The patch handles this by unconfiguring
the device, thereby removing all the interfaces and their associated
drivers and children.

Signed-off-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman