When building the htmldocs (in verbose mode), scripts/kernel-doc reports the following type of warnings: Warning(drivers/usb/core/usb.c:76): No description found for return value of 'usb_find_alt_setting' Fix them by: - adding some missing descriptions of return values - using "Return" sections for those descriptions Signed-off-by: Yacine Belkadi <yacine.belkadi.1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current EHCI code sleeps a flat 110ms in the resume path if there was a USB 1.1 device connected to its companion controller during suspend, waiting for the device to reappear and reset so that it can be handed back to the companion. This is necessary if the device uses persist, so that the companion controller can actually see it during its own resume path. However, if the device doesn't use persist, this is entirely unnecessary. We might just as well ignore it and have the normal device detection/reset/handoff code handle it asynchronously when it eventually shows up. As USB 1.1 devices are almost exclusively HIDs these days (for which persist has no value), this can allow distros to shave another tenth of a second off their resume time. In order to enable this optimization, the patch also adds a new usb_for_each_dev() iterator that is exported by the USB core and wraps bus_for_each_dev() with the logic to differentiate between struct usb_device and struct usb_interface on the usb_bus_type bus. Signed-off-by: Julius Werner <jwerner@chromium.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull USB patches from Greg Kroah-Hartman: "Here's the big USB pull request for 3.10-rc1. Lots of USB patches here, the majority being USB gadget changes and USB-serial driver cleanups, the rest being ARM build fixes / cleanups, and individual driver updates. We also finally got some chipidea fixes, which have been delayed for a number of kernel releases, as the maintainer has now reappeared. All of these have been in linux-next for a while" * tag 'usb-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (568 commits) USB: ehci-msm: USB_MSM_OTG needs USB_PHY USB: OHCI: avoid conflicting platform drivers USB: OMAP: ISP1301 needs USB_PHY USB: lpc32xx: ISP1301 needs USB_PHY USB: ftdi_sio: enable two UART ports on ST Microconnect Lite usb: phy: tegra: don't call into tegra-ehci directly usb: phy: phy core cannot yet be a module USB: Fix initconst in ehci driver usb-storage: CY7C68300A chips do not support Cypress ATACB USB: serial: option: Added support Olivetti Olicard 145 USB: ftdi_sio: correct ST Micro Connect Lite PIDs ARM: mxs_defconfig: add CONFIG_USB_PHY ARM: imx_v6_v7_defconfig: add CONFIG_USB_PHY usb: phy: remove exported function from __init section usb: gadget: zero: put function instances on unbind usb: gadget: f_sourcesink.c: correct a copy-paste misnomer usb: gadget: cdc2: fix error return code in cdc_do_config() usb: gadget: multi: fix error return code in rndis_do_config() usb: gadget: f_obex: fix error return code in obex_bind() USB: storage: convert to use module_usb_driver() ...
Now that devtmpfs is caring about uid/gid, we need to use the correct internal types so users who have USER_NS enabled will have things work properly for them. Thanks to Eric for pointing this out, and the patch review. Reported-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Kay Sievers <kay@vrfy.org> Cc: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some drivers want to tell userspace what uid and gid should be used for their device nodes, so allow that information to percolate through the driver core to userspace in order to make this happen. This means that some systems (i.e. Android and friends) will not need to even run a udev-like daemon for their device node manager and can just rely in devtmpfs fully, reducing their footprint even more. Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch (as1675) removes the CONFIG_USB_SUSPEND option, essentially replacing it everywhere with CONFIG_PM_RUNTIME (except for one place in hub.c, where it is replaced with CONFIG_PM because the code needs to be used in both runtime and system PM). The net result is code shrinkage and simplification. There's very little point in keeping CONFIG_USB_SUSPEND because almost everybody enables it. The few that don't will find that the usbcore module has gotten somewhat bigger and they will have to take active measures if they want to prevent hubs from being runtime suspended. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove conditional code based on CONFIG_HOTPLUG being false. It's always on now in preparation of it going away as an option. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We defined bus_to_hdc for that, use it. Signed-off-by: Yuanhan Liu <yliu.null@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The USB 3.0 Set/Clear Feature U1/U2 Enable cannot be sent to a device in the Default or Addressed state. It can only be sent to a configured device. Change the USB core to initialize the LPM disable count to 1 (disabled), which reflects this limitation. Change usb_set_configuration() to ensure that if the device is unconfigured on entry, usb_lpm_disable() is not called. This avoids sending the Clear Feature U1/U2 when the device is in the Addressed state. When usb_set_configuration() exits with a successfully installed configuration, usb_lpm_enable() will be called. Once the new configuration is installed, make sure usb_set_configuration() only calls usb_enable_lpm() if the device moved to the Configured state. If we have unconfigured the device by sending it a Set Configuration for config 0, don't enable LPM. This commit should be backported to kernels as old as 3.5, that contain the commit 8306095fd2c1100e8244c09bf560f97aca5a311d "USB: Disable USB 3.0 LPM in critical sections." Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@vger.kernel.org
Commit da0af6e ("usb: Bind devices to ACPI devices when possible") really
tries to force-bind devices even when impossible, unlike what it says in
the subject.
CONFIG_ACPI is not an indication that ACPI tables are actually present, nor
is an indication that any USB relevant information is present in them. There
is no reason to fail the creation of a USB bus if it can't bind it to
ACPI device during initialization.
On systems with CONFIG_ACPI set but without ACPI tables it would cause a
boot panic.
Signed-off-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>