linux-toradex.git/drivers/usb/core/usb.h, branch v3.4.45

USB: cleanup the handling of the PM complete call

2012-01-24T22:23:49+00:00

This eliminates the last instance of a function's behavior
controlled by a parameter as Linus hates such things.

Signed-off-by: Oliver Neukum 
Acked-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman

USB: move usb_translate_errors to linux/usb.h

2011-11-15T18:47:40+00:00

Move usb_translate_errors from usb core to linux/usb.h as it is meant to
be accessed from drivers.

Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

xHCI: set USB2 hardware LPM

2011-09-26T22:51:10+00:00

If the device pass the USB2 software LPM and the host supports hardware
LPM, enable hardware LPM for the device to let the host decide when to
put the link into lower power state.

If hardware LPM is enabled for a port and driver wants to put it into
suspend, it must first disable hardware LPM, resume the port into U0,
and then suspend the port.

Signed-off-by: Andiry Xu 
Signed-off-by: Sarah Sharp 
Signed-off-by: Greg Kroah-Hartman

usbcore: get BOS descriptor set

2011-09-26T22:51:08+00:00

This commit gets BOS(Binary Device Object Store) descriptor set for Super
Speed devices and High Speed devices which support BOS descriptor.

BOS descriptor is used to report additional USB device-level capabilities
that are not reported via the Device descriptor. By getting BOS descriptor
set, driver can check device's device-level capability such as LPM
capability.

Signed-off-by: Andiry Xu 
Signed-off-by: Sarah Sharp 
Signed-off-by: Greg Kroah-Hartman

usb: core: Change usb_create_sysfs_intf_files()' return type to void

2011-04-30T00:24:38+00:00

The usb_create_sysfs_intf_files() function always returned zero even
if it failed to create sysfs fails.  Since this is a desired behaviour
there is no need to return return code at all.  This commit changes
function's return type (form int) to void.

Signed-off-by: Michal Nazarewicz 
Cc: Sergey Senozhatsky 
Signed-off-by: Greg Kroah-Hartman

USB: Move runtime PM callbacks to usb_device_pm_ops

2011-03-18T18:55:36+00:00

USB defines usb_device_type pointing to usb_device_pm_ops that
provides system-wide PM callbacks only and usb_bus_type pointing to
usb_bus_pm_ops that provides runtime PM callbacks only.  However,
the USB runtime PM callbacks may be defined in usb_device_pm_ops
which makes it possible to drop usb_bus_pm_ops and will allow us
to consolidate the handling of subsystems by the PM core code.

Signed-off-by: Rafael J. Wysocki 
Acked-by: Greg Kroah-Hartman

USB: add helper to convert USB error codes

2011-01-23T03:35:38+00:00

This converts error codes specific to USB to generic error codes
that can be returned to user space. Tests showed that it is so small
that it is better inlined.

Signed-off-by: Oliver Neukum 
Signed-off-by: Greg Kroah-Hartman

USB: use the runtime-PM autosuspend implementation

2010-11-16T22:03:41+00:00

This patch (as1428) converts USB over to the new runtime-PM core
autosuspend framework.  One slightly awkward aspect of the conversion
is that USB devices will now have two suspend-delay attributes: the
old power/autosuspend file and the new power/autosuspend_delay_ms
file.  One expresses the delay time in seconds and the other in
milliseconds, but otherwise they do the same thing.  The old attribute
can be deprecated and then removed eventually.

Signed-off-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman

USB: convert to the runtime PM framework

2010-03-02T22:54:12+00:00

This patch (as1329) converts the USB stack over to the PM core's
runtime PM framework.  This involves numerous changes throughout
usbcore, especially to hub.c and driver.c.  Perhaps the most notable
change is that CONFIG_USB_SUSPEND now depends on CONFIG_PM_RUNTIME
instead of CONFIG_PM.

Several fields in the usb_device and usb_interface structures are no
longer needed.  Some code which used to depend on CONFIG_USB_PM now
depends on CONFIG_USB_SUSPEND (requiring some rearrangement of header
files).

The only visible change in behavior should be that following a system
sleep (resume from RAM or resume from hibernation), autosuspended USB
devices will be resumed just like everything else.  They won't remain
suspended.  But if they aren't in use then they will naturally
autosuspend again in a few seconds.

Signed-off-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman

USB: consolidate remote wakeup routines

2010-03-02T22:54:08+00:00

This patch (as1324) makes a small change to the code used for remote
wakeup of root hubs.  hcd_resume_work() now calls the hub driver's
remote-wakeup routine instead of implementing its own version.

The patch is complicated by the need to rename remote_wakeup() to
usb_remote_wakeup(), make it non-static, and declare it in a header
file.  There's also the additional complication required to make
everything work when CONFIG_PM isn't set; the do-nothing inline
routine had to be moved into the header file.

Signed-off-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman