linux-toradex.git/drivers/usb/core, branch tegra

usb: fix number of mapped SG DMA entries

2012-01-12T19:33:35+00:00

commit bc677d5b64644c399cd3db6a905453e611f402ab upstream.

Add a new field num_mapped_sgs to struct urb so that we have a place to
store the number of mapped entries and can also retain the original
value of entries in num_sgs.  Previously, usb_hcd_map_urb_for_dma()
would overwrite this with the number of mapped entries, which would
break dma_unmap_sg() because it requires the original number of entries.

This fixes warnings like the following when using USB storage devices:
 ------------[ cut here ]------------
 WARNING: at lib/dma-debug.c:902 check_unmap+0x4e4/0x695()
 ehci_hcd 0000:00:12.2: DMA-API: device driver frees DMA sg list with different entry count [map count=4] [unmap count=1]
 Modules linked in: ohci_hcd ehci_hcd
 Pid: 0, comm: kworker/0:1 Not tainted 3.2.0-rc2+ #319
 Call Trace:
    [] warn_slowpath_common+0x80/0x98
  [] warn_slowpath_fmt+0x41/0x43
  [] check_unmap+0x4e4/0x695
  [] ? trace_hardirqs_off+0xd/0xf
  [] ? _raw_spin_unlock_irqrestore+0x33/0x50
  [] debug_dma_unmap_sg+0xeb/0x117
  [] usb_hcd_unmap_urb_for_dma+0x71/0x188
  [] unmap_urb_for_dma+0x20/0x22
  [] usb_hcd_giveback_urb+0x5d/0xc0
  [] ehci_urb_done+0xf7/0x10c [ehci_hcd]
  [] qh_completions+0x429/0x4bd [ehci_hcd]
  [] ehci_work+0x95/0x9c0 [ehci_hcd]
  ...
 ---[ end trace f29ac88a5a48c580 ]---
 Mapped at:
  [] debug_dma_map_sg+0x45/0x139
  [] usb_hcd_map_urb_for_dma+0x22e/0x478
  [] usb_hcd_submit_urb+0x63f/0x6fa
  [] usb_submit_urb+0x2c7/0x2de
  [] usb_sg_wait+0x55/0x161

Signed-off-by: Clemens Ladisch 
Signed-off-by: Greg Kroah-Hartman

USB: add quirk for another camera

2012-01-12T19:33:29+00:00

commit 35284b3d2f68a8a3703745e629999469f78386b5 upstream.

The Guillemot Webcam Hercules Dualpix Exchange camera
has been reported with a second ID.

Signed-off-by: Oliver Neukum 
Signed-off-by: Greg Kroah-Hartman

USB: quirks: adding more quirky webcams to avoid squeaky audio

2011-11-26T17:08:39+00:00

commit 0d145d7d4a241c321c832a810bb6edad18e2217b upstream.

The following patch contains additional affected webcam models, on top of the
patches commited to linux-next 2394d67e446bf616a0885167d5f0d397bdacfdfc
and 5b253d88cc6c65a23cefc457a5a4ef139913c5fc

Signed-off-by: sordna 
Cc: Oliver Neukum 
Signed-off-by: Greg Kroah-Hartman

USB: add quirk for Logitech C600 web cam

2011-11-26T17:08:38+00:00

commit 60c71ca972a2dd3fd9d0165b405361c8ad48349b upstream.

We've had another report of the "chipmunk" sound on a Logitech C600 webcam.
This patch resolves the issue.

Signed-off-by: Josh Boyer 
Signed-off-by: Greg Kroah-Hartman

usb, xhci: Clear warm reset change event during init

2011-11-26T17:08:37+00:00

commit 79c3dd8150fd5236d95766a9e662e3e932b462c9 upstream.

I noticed on my Panther Point system that I wasn't getting hotplug events
for my usb3.0 disk on a usb3 port.  I tracked it down to the fact that the
system had the warm reset change bit still set.  This seemed to block future
events from being received, including a hotplug event.

Clearing this bit during initialization allowed the hotplug event to be
received and the disk to be recognized correctly.

This patch should be backported to kernels as old as 2.6.39.

Signed-off-by: Don Zickus 
Signed-off-by: Sarah Sharp 
Signed-off-by: Greg Kroah-Hartman

USB: Update last_busy time after autosuspend fails

2011-11-11T17:44:11+00:00

commit b2c0a863e14676fa5760c6d828fd373288e2f64a upstream.

Originally, the runtime PM core would send an idle notification
whenever a suspend attempt failed.  The idle callback routine could
then schedule a delayed suspend for some time later.

However this behavior was changed by commit
f71648d73c1650b8b4aceb3856bebbde6daa3b86 (PM / Runtime: Remove idle
notification after failing suspend).  No notifications were sent, and
there was no clear mechanism to retry failed suspends.

This caused problems for the usbhid driver, because it fails
autosuspend attempts as long as a key is being held down.  A companion
patch changes the PM core's behavior, but we also need to change the
USB core.  In particular, this patch (as1493) updates the device's
last_busy time when an autosuspend fails, so that the PM core will
retry the autosuspend in the future when the delay time expires
again.

Signed-off-by: Alan Stern 
Tested-by: Henrik Rydberg 
Acked-by: Greg Kroah-Hartman 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

USB: add quirk for Logitech C300 web cam

2011-11-11T17:42:44+00:00

commit 5b253d88cc6c65a23cefc457a5a4ef139913c5fc upstream.

My webcam is a Logitech C300 and I get "chipmunk"ed squeaky sound.
The following trivial patch fixes it.

Signed-off-by: Jon Levell 
Signed-off-by: Greg Kroah-Hartman

USB: add RESET_RESUME for webcams shown to be quirky

2011-11-11T17:42:38+00:00

commit 2394d67e446bf616a0885167d5f0d397bdacfdfc upstream.

The new runtime PM code has shown that many webcams suffer
from a race condition that may crash them upon resume.
Runtime PM is especially prone to show the problem because
it retains power to the cameras at all times. However
system suspension may also crash the devices and retain
power to the devices.
The only way to solve this problem without races is in
usbcore with the RESET_RESUME quirk.

Signed-off-by: Oliver Neukum 
Signed-off-by: Greg Kroah-Hartman

USB: pid_ns: ensure pid is not freed during kill_pid_info_as_uid

2011-11-11T17:42:37+00:00

commit aec01c5895051849ed842dc5b8794017a7751f28 upstream.

Alan Stern points out that after spin_unlock(&ps->lock) there is no
guarantee that ps->pid won't be freed.  Since kill_pid_info_as_uid() is
called after the spin_unlock(), the pid passed to it must be pinned.

Reported-by: Alan Stern 
Signed-off-by: Serge Hallyn 
Signed-off-by: Greg Kroah-Hartman

usb/core/devio.c: Check for printer class specific request

2011-11-11T17:42:37+00:00

commit 393cbb5151ecda9f9e14e3082d048dd27a1ff9f6 upstream.

In the usb printer class specific request get_device_id the value of
wIndex is (interface << 8 | altsetting) instead of just interface.
This enables the detection of some printers with libusb.

Acked-by: Alan Stern 
Signed-off-by: Matthias Dellweg <2500@gmx.de>
Signed-off-by: Greg Kroah-Hartman