linux-toradex.git/drivers/usb/core, branch v3.0.29

USB: don't clear urb->dev in scatter-gather library

2012-04-22T23:21:40+00:00

commit bcf398537630bf20b4dbe59ba855b69f404c93cf upstream.

This patch (as1517b) fixes an error in the USB scatter-gather library.
The library code uses urb->dev to determine whether or nor an URB is
currently active; the completion handler sets urb->dev to NULL.
However the core unlinking routines need to use urb->dev.  Since
unlinking always racing with completion, the completion handler must
not clear urb->dev -- it can lead to invalid memory accesses when a
transfer has to be cancelled.

This patch fixes the problem by getting rid of the lines that clear
urb->dev after urb has been submitted.  As a result we may end up
trying to unlink an URB that failed in submission or that has already
completed, so an extra check is added after each unlink to avoid
printing an error message when this happens.  The checks are updated
in both sg_complete() and sg_cancel(), and the second is updated to
match the first (currently it prints out unnecessary warning messages
if a device is unplugged while a transfer is in progress).

Signed-off-by: Alan Stern 
Reported-and-tested-by: Illia Zaitsev 
CC: Ming Lei 
Signed-off-by: Greg Kroah-Hartman

USB: Don't fail USB3 probe on missing legacy PCI IRQ.

2012-03-01T00:34:27+00:00

commit 68d07f64b8a11a852d48d1b05b724c3e20c0d94b upstream

Intel has a PCI USB xhci host controller on a new platform. It doesn't
have a line IRQ definition in BIOS.  The Linux driver refuses to
initialize this controller, but Windows works well because it only depends
on MSI.

Actually, Linux also can work for MSI.  This patch avoids the line IRQ
checking for USB3 HCDs in usb core PCI probe.  It allows the xHCI driver
to try to enable MSI or MSI-X first.  It will fail the probe if MSI
enabling failed and there's no legacy PCI IRQ.

This patch should be backported to kernels as old as 2.6.32.

[Maintainer note: This patch is a backport of commit
68d07f64b8a11a852d48d1b05b724c3e20c0d94b "USB: Don't fail USB3 probe on
missing legacy PCI IRQ." to the 3.0 kernel.  Note, the original patch
description was wrong.  We should not back port this to kernels older
than 2.6.36, since that was the first kernel to support MSI and MSI-X
for xHCI hosts.  These systems will just not work without MSI support,
so the probe should fail on kernels older than 2.6.36.]

Signed-off-by: Alex Shi 
Signed-off-by: Sarah Sharp 
Signed-off-by: Greg Kroah-Hartman

USB: Set hub depth after USB3 hub reset

2012-03-01T00:34:22+00:00

commit a45aa3b30583e7d54e7cf4fbcd0aa699348a6e5c upstream.

The superspeed device attached to a USB 3.0 hub(such as VIA's)
doesn't respond the address device command after resume. The
root cause is the superspeed hub will miss the Hub Depth value
that is used as an offset into the route string to locate the
bits it uses to determine the downstream port number after
reset, and all packets can't be routed to the device attached
to the superspeed hub.

Hub driver sends a Set Hub Depth request to the superspeed hub
except for USB 3.0 root hub when the hub is initialized and
doesn't send the request again after reset due to the resume
process. So moving the code that sends the Set Hub Depth request
to the superspeed hub from hub_configure() to hub_activate()
is to cover those situations include initialization and reset.

The patch should be backported to kernels as old as 2.6.39.

Signed-off-by: Elric Fu 
Signed-off-by: Sarah Sharp 
Acked-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman

usb: fix number of mapped SG DMA entries

2012-01-12T19:35:25+00:00

commit bc677d5b64644c399cd3db6a905453e611f402ab upstream.

Add a new field num_mapped_sgs to struct urb so that we have a place to
store the number of mapped entries and can also retain the original
value of entries in num_sgs.  Previously, usb_hcd_map_urb_for_dma()
would overwrite this with the number of mapped entries, which would
break dma_unmap_sg() because it requires the original number of entries.

This fixes warnings like the following when using USB storage devices:
 ------------[ cut here ]------------
 WARNING: at lib/dma-debug.c:902 check_unmap+0x4e4/0x695()
 ehci_hcd 0000:00:12.2: DMA-API: device driver frees DMA sg list with different entry count [map count=4] [unmap count=1]
 Modules linked in: ohci_hcd ehci_hcd
 Pid: 0, comm: kworker/0:1 Not tainted 3.2.0-rc2+ #319
 Call Trace:
    [] warn_slowpath_common+0x80/0x98
  [] warn_slowpath_fmt+0x41/0x43
  [] check_unmap+0x4e4/0x695
  [] ? trace_hardirqs_off+0xd/0xf
  [] ? _raw_spin_unlock_irqrestore+0x33/0x50
  [] debug_dma_unmap_sg+0xeb/0x117
  [] usb_hcd_unmap_urb_for_dma+0x71/0x188
  [] unmap_urb_for_dma+0x20/0x22
  [] usb_hcd_giveback_urb+0x5d/0xc0
  [] ehci_urb_done+0xf7/0x10c [ehci_hcd]
  [] qh_completions+0x429/0x4bd [ehci_hcd]
  [] ehci_work+0x95/0x9c0 [ehci_hcd]
  ...
 ---[ end trace f29ac88a5a48c580 ]---
 Mapped at:
  [] debug_dma_map_sg+0x45/0x139
  [] usb_hcd_map_urb_for_dma+0x22e/0x478
  [] usb_hcd_submit_urb+0x63f/0x6fa
  [] usb_submit_urb+0x2c7/0x2de
  [] usb_sg_wait+0x55/0x161

Signed-off-by: Clemens Ladisch 
Signed-off-by: Greg Kroah-Hartman

USB: add quirk for another camera

2012-01-12T19:35:12+00:00

commit 35284b3d2f68a8a3703745e629999469f78386b5 upstream.

The Guillemot Webcam Hercules Dualpix Exchange camera
has been reported with a second ID.

Signed-off-by: Oliver Neukum 
Signed-off-by: Greg Kroah-Hartman

USB: quirks: adding more quirky webcams to avoid squeaky audio

2011-11-26T17:10:04+00:00

commit 0d145d7d4a241c321c832a810bb6edad18e2217b upstream.

The following patch contains additional affected webcam models, on top of the
patches commited to linux-next 2394d67e446bf616a0885167d5f0d397bdacfdfc
and 5b253d88cc6c65a23cefc457a5a4ef139913c5fc

Signed-off-by: sordna 
Cc: Oliver Neukum 
Signed-off-by: Greg Kroah-Hartman

USB: add quirk for Logitech C600 web cam

2011-11-26T17:10:03+00:00

commit 60c71ca972a2dd3fd9d0165b405361c8ad48349b upstream.

We've had another report of the "chipmunk" sound on a Logitech C600 webcam.
This patch resolves the issue.

Signed-off-by: Josh Boyer 
Signed-off-by: Greg Kroah-Hartman

usb, xhci: Clear warm reset change event during init

2011-11-26T17:10:00+00:00

commit 79c3dd8150fd5236d95766a9e662e3e932b462c9 upstream.

I noticed on my Panther Point system that I wasn't getting hotplug events
for my usb3.0 disk on a usb3 port.  I tracked it down to the fact that the
system had the warm reset change bit still set.  This seemed to block future
events from being received, including a hotplug event.

Clearing this bit during initialization allowed the hotplug event to be
received and the disk to be recognized correctly.

This patch should be backported to kernels as old as 2.6.39.

Signed-off-by: Don Zickus 
Signed-off-by: Sarah Sharp 
Signed-off-by: Greg Kroah-Hartman

USB: Update last_busy time after autosuspend fails

2011-11-11T17:36:57+00:00

commit b2c0a863e14676fa5760c6d828fd373288e2f64a upstream.

Originally, the runtime PM core would send an idle notification
whenever a suspend attempt failed.  The idle callback routine could
then schedule a delayed suspend for some time later.

However this behavior was changed by commit
f71648d73c1650b8b4aceb3856bebbde6daa3b86 (PM / Runtime: Remove idle
notification after failing suspend).  No notifications were sent, and
there was no clear mechanism to retry failed suspends.

This caused problems for the usbhid driver, because it fails
autosuspend attempts as long as a key is being held down.  A companion
patch changes the PM core's behavior, but we also need to change the
USB core.  In particular, this patch (as1493) updates the device's
last_busy time when an autosuspend fails, so that the PM core will
retry the autosuspend in the future when the delay time expires
again.

Signed-off-by: Alan Stern 
Tested-by: Henrik Rydberg 
Acked-by: Greg Kroah-Hartman 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

USB: Avoid NULL pointer deref in usb_hcd_alloc_bandwidth.

2011-11-11T17:36:37+00:00

commit 8a9af4fdf6d5eeb3200a088354d266a87e8260b0 upstream.

usb_ifnum_to_if() can return NULL if the USB device does not have a
configuration installed (usb_device->actconfig == NULL), or if we can't
find the interface number in the installed configuration.  Return an
error instead of crashing.

Signed-off-by: Sarah Sharp 
Signed-off-by: Greg Kroah-Hartman