linux-toradex.git/drivers/usb/core, branch v3.10.78 Linux kernel for Apalis and Colibri modules usb: core: hub: use new USB_RESUME_TIMEOUT 2015-05-06T19:56:23+00:00 Felipe Balbi balbi@ti.com 2015-02-13T21:38:33+00:00 e217fcc13682beef6eaafbb5a419e6b50ddf94b9 commit bbc78c07a51f6fd29c227b1220a9016e585358ba upstream. Make sure we're using the new macro, so our resume signaling will always pass certification. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit bbc78c07a51f6fd29c227b1220a9016e585358ba upstream.

Make sure we're using the new macro, so our
resume signaling will always pass certification.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: usbfs: don't leak kernel data in siginfo 2015-03-18T12:22:30+00:00 Alan Stern stern@rowland.harvard.edu 2015-02-13T15:54:53+00:00 92677959bdadb8f7dd2809c5eedc4cd8ca8aeee2 commit f0c2b68198589249afd2b1f2c4e8de8c03e19c16 upstream. When a signal is delivered, the information in the siginfo structure is copied to userspace. Good security practice dicatates that the unused fields in this structure should be initialized to 0 so that random kernel stack data isn't exposed to the user. This patch adds such an initialization to the two places where usbfs raises signals. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Dave Mielke <dave@mielke.cc> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f0c2b68198589249afd2b1f2c4e8de8c03e19c16 upstream.

When a signal is delivered, the information in the siginfo structure
is copied to userspace.  Good security practice dicatates that the
unused fields in this structure should be initialized to 0 so that
random kernel stack data isn't exposed to the user.  This patch adds
such an initialization to the two places where usbfs raises signals.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Dave Mielke <dave@mielke.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: core: buffer: smallest buffer should start at ARCH_DMA_MINALIGN 2015-03-06T22:40:51+00:00 Sebastian Andrzej Siewior bigeasy@linutronix.de 2014-12-05T14:13:54+00:00 8b1d57fdf3dd846e4b797a913aecd7f832abb629 commit 5efd2ea8c9f4f12916ffc8ba636792ce052f6911 upstream. the following error pops up during "testusb -a -t 10" | musb-hdrc musb-hdrc.1.auto: dma_pool_free buffer-128, f134e000/be842000 (bad dma) hcd_buffer_create() creates a few buffers, the smallest has 32 bytes of size. ARCH_KMALLOC_MINALIGN is set to 64 bytes. This combo results in hcd_buffer_alloc() returning memory which is 32 bytes aligned and it might by identified by buffer_offset() as another buffer. This means the buffer which is on a 32 byte boundary will not get freed, instead it tries to free another buffer with the error message. This patch fixes the issue by creating the smallest DMA buffer with the size of ARCH_KMALLOC_MINALIGN (or 32 in case ARCH_KMALLOC_MINALIGN is smaller). This might be 32, 64 or even 128 bytes. The next three pools will have the size 128, 512 and 2048. In case the smallest pool is 128 bytes then we have only three pools instead of four (and zero the first entry in the array). The last pool size is always 2048 bytes which is the assumed PAGE_SIZE / 2 of 4096. I doubt it makes sense to continue using PAGE_SIZE / 2 where we would end up with 8KiB buffer in case we have 16KiB pages. Instead I think it makes sense to have a common size(s) and extend them if there is need to. There is a BUILD_BUG_ON() now in case someone has a minalign of more than 128 bytes. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 5efd2ea8c9f4f12916ffc8ba636792ce052f6911 upstream.

the following error pops up during "testusb -a -t 10"
| musb-hdrc musb-hdrc.1.auto: dma_pool_free buffer-128,	f134e000/be842000 (bad dma)
hcd_buffer_create() creates a few buffers, the smallest has 32 bytes of
size. ARCH_KMALLOC_MINALIGN is set to 64 bytes. This combo results in
hcd_buffer_alloc() returning memory which is 32 bytes aligned and it
might by identified by buffer_offset() as another buffer. This means the
buffer which is on a 32 byte boundary will not get freed, instead it
tries to free another buffer with the error message.

This patch fixes the issue by creating the smallest DMA buffer with the
size of ARCH_KMALLOC_MINALIGN (or 32 in case ARCH_KMALLOC_MINALIGN is
smaller). This might be 32, 64 or even 128 bytes. The next three pools
will have the size 128, 512 and 2048.
In case the smallest pool is 128 bytes then we have only three pools
instead of four (and zero the first entry in the array).
The last pool size is always 2048 bytes which is the assumed PAGE_SIZE /
2 of 4096. I doubt it makes sense to continue using PAGE_SIZE / 2 where
we would end up with 8KiB buffer in case we have 16KiB pages.
Instead I think it makes sense to have a common size(s) and extend them
if there is need to.
There is a BUILD_BUG_ON() now in case someone has a minalign of more than
128 bytes.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: fix use-after-free bug in usb_hcd_unlink_urb() 2015-03-06T22:40:51+00:00 Alan Stern stern@rowland.harvard.edu 2015-01-30T17:58:26+00:00 c237545ea8eab3d3e7647bde17634f51327847ff commit c99197902da284b4b723451c1471c45b18537cde upstream. The usb_hcd_unlink_urb() routine in hcd.c contains two possible use-after-free errors. The dev_dbg() statement at the end of the routine dereferences urb and urb->dev even though both structures may have been deallocated. This patch fixes the problem by storing urb->dev in a local variable (avoiding the dereference of urb) and moving the dev_dbg() up before the usb_put_dev() call. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Joe Lawrence <joe.lawrence@stratus.com> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c99197902da284b4b723451c1471c45b18537cde upstream.

The usb_hcd_unlink_urb() routine in hcd.c contains two possible
use-after-free errors.  The dev_dbg() statement at the end of the
routine dereferences urb and urb->dev even though both structures may
have been deallocated.

This patch fixes the problem by storing urb->dev in a local variable
(avoiding the dereference of urb) and moving the dev_dbg() up before
the usb_put_dev() call.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Joe Lawrence <joe.lawrence@stratus.com>
Tested-by: Joe Lawrence <joe.lawrence@stratus.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb-quirks: Add reset-resume quirk for MS Wireless Laser Mouse 6000 2014-12-06T23:05:48+00:00 Hans de Goede hdegoede@redhat.com 2014-11-24T10:22:38+00:00 165a550e415dcdb200d89da589c5a9fde2d3d4ab commit 263e80b43559a6103e178a9176938ce171b23872 upstream. This wireless mouse receiver needs a reset-resume quirk to properly come out of reset. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1165206 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 263e80b43559a6103e178a9176938ce171b23872 upstream.

This wireless mouse receiver needs a reset-resume quirk to properly come
out of reset.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1165206
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: Do not allow usb_alloc_streams on unconfigured devices 2014-11-14T16:47:59+00:00 Hans de Goede hdegoede@redhat.com 2014-10-01T09:29:14+00:00 e0daafbbf3cb9ea341f72e5e26f1a8fcea977c0e commit 90a646c770c50cc206ceba0d7b50453c46c13c36 upstream. This commit fixes the following oops: [10238.622067] scsi host3: uas_eh_bus_reset_handler start [10240.766164] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd [10245.779365] usb 3-4: device descriptor read/8, error -110 [10245.883331] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd [10250.897603] usb 3-4: device descriptor read/8, error -110 [10251.058200] BUG: unable to handle kernel NULL pointer dereference at 0000000000000040 [10251.058244] IP: [<ffffffff815ac6e1>] xhci_check_streams_endpoint+0x91/0x140 <snip> [10251.059473] Call Trace: [10251.059487] [<ffffffff815aca6c>] xhci_calculate_streams_and_bitmask+0xbc/0x130 [10251.059520] [<ffffffff815aeb5f>] xhci_alloc_streams+0x10f/0x5a0 [10251.059548] [<ffffffff810a4685>] ? check_preempt_curr+0x75/0xa0 [10251.059575] [<ffffffff810a46dc>] ? ttwu_do_wakeup+0x2c/0x100 [10251.059601] [<ffffffff810a49e6>] ? ttwu_do_activate.constprop.111+0x66/0x70 [10251.059635] [<ffffffff815779ab>] usb_alloc_streams+0xab/0xf0 [10251.059662] [<ffffffffc0616b48>] uas_configure_endpoints+0x128/0x150 [uas] [10251.059694] [<ffffffffc0616bac>] uas_post_reset+0x3c/0xb0 [uas] [10251.059722] [<ffffffff815727d9>] usb_reset_device+0x1b9/0x2a0 [10251.059749] [<ffffffffc0616f42>] uas_eh_bus_reset_handler+0xb2/0x190 [uas] [10251.059781] [<ffffffff81514293>] scsi_try_bus_reset+0x53/0x110 [10251.059808] [<ffffffff815163b7>] scsi_eh_bus_reset+0xf7/0x270 <snip> The problem is the following call sequence (simplified): 1) usb_reset_device 2) usb_reset_and_verify_device 2) hub_port_init 3) hub_port_finish_reset 3) xhci_discover_or_reset_device This frees xhci->devs[slot_id]->eps[ep_index].ring for all eps but 0 4) usb_get_device_descriptor This fails 5) hub_port_init fails 6) usb_reset_and_verify_device fails, does not restore device config 7) uas_post_reset 8) xhci_alloc_streams NULL deref on the free-ed ring This commit fixes this by not allowing usb_alloc_streams to continue if the device is not configured. Note that we do allow usb_free_streams to continue after a (logical) disconnect, as it is necessary to explicitly free the streams at the xhci controller level. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 90a646c770c50cc206ceba0d7b50453c46c13c36 upstream.

This commit fixes the following oops:

[10238.622067] scsi host3: uas_eh_bus_reset_handler start
[10240.766164] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd
[10245.779365] usb 3-4: device descriptor read/8, error -110
[10245.883331] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd
[10250.897603] usb 3-4: device descriptor read/8, error -110
[10251.058200] BUG: unable to handle kernel NULL pointer dereference at  0000000000000040
[10251.058244] IP: [<ffffffff815ac6e1>] xhci_check_streams_endpoint+0x91/0x140
<snip>
[10251.059473] Call Trace:
[10251.059487]  [<ffffffff815aca6c>] xhci_calculate_streams_and_bitmask+0xbc/0x130
[10251.059520]  [<ffffffff815aeb5f>] xhci_alloc_streams+0x10f/0x5a0
[10251.059548]  [<ffffffff810a4685>] ? check_preempt_curr+0x75/0xa0
[10251.059575]  [<ffffffff810a46dc>] ? ttwu_do_wakeup+0x2c/0x100
[10251.059601]  [<ffffffff810a49e6>] ? ttwu_do_activate.constprop.111+0x66/0x70
[10251.059635]  [<ffffffff815779ab>] usb_alloc_streams+0xab/0xf0
[10251.059662]  [<ffffffffc0616b48>] uas_configure_endpoints+0x128/0x150 [uas]
[10251.059694]  [<ffffffffc0616bac>] uas_post_reset+0x3c/0xb0 [uas]
[10251.059722]  [<ffffffff815727d9>] usb_reset_device+0x1b9/0x2a0
[10251.059749]  [<ffffffffc0616f42>] uas_eh_bus_reset_handler+0xb2/0x190 [uas]
[10251.059781]  [<ffffffff81514293>] scsi_try_bus_reset+0x53/0x110
[10251.059808]  [<ffffffff815163b7>] scsi_eh_bus_reset+0xf7/0x270
<snip>

The problem is the following call sequence (simplified):

1) usb_reset_device
2)  usb_reset_and_verify_device
2)   hub_port_init
3)    hub_port_finish_reset
3)     xhci_discover_or_reset_device
        This frees xhci->devs[slot_id]->eps[ep_index].ring for all eps but 0
4)    usb_get_device_descriptor
       This fails
5)   hub_port_init fails
6)  usb_reset_and_verify_device fails, does not restore device config
7)  uas_post_reset
8)   xhci_alloc_streams
      NULL deref on the free-ed ring

This commit fixes this by not allowing usb_alloc_streams to continue if
the device is not configured.

Note that we do allow usb_free_streams to continue after a (logical)
disconnect, as it is necessary to explicitly free the streams at the xhci
controller level.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: Add device quirk for ASUS T100 Base Station keyboard 2014-10-15T06:31:57+00:00 Lu Baolu baolu.lu@linux.intel.com 2014-09-19T02:13:50+00:00 084a2fd4fb44bc3a72e6a091b6f473e8b6176c77 commit ddbe1fca0bcb87ca8c199ea873a456ca8a948567 upstream. This full-speed USB device generates spurious remote wakeup event as soon as USB_DEVICE_REMOTE_WAKEUP feature is set. As the result, Linux can't enter system suspend and S0ix power saving modes once this keyboard is used. This patch tries to introduce USB_QUIRK_IGNORE_REMOTE_WAKEUP quirk. With this quirk set, wakeup capability will be ignored during device configure. This patch could be back-ported to kernels as old as 2.6.39. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ddbe1fca0bcb87ca8c199ea873a456ca8a948567 upstream.

This full-speed USB device generates spurious remote wakeup event
as soon as USB_DEVICE_REMOTE_WAKEUP feature is set. As the result,
Linux can't enter system suspend and S0ix power saving modes once
this keyboard is used.

This patch tries to introduce USB_QUIRK_IGNORE_REMOTE_WAKEUP quirk.
With this quirk set, wakeup capability will be ignored during
device configure.

This patch could be back-ported to kernels as old as 2.6.39.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb:hub set hub->change_bits when over-current happens 2014-10-05T21:54:10+00:00 Shen Guang shenguang10@gmail.com 2014-01-08T06:45:42+00:00 47415d5452b8945bfbe7e2adb3fa15658b3c3d21 commit 08d1dec6f4054e3613f32051d9b149d4203ce0d2 upstream. When we are doing compliance test with xHCI, we found that if we enable CONFIG_USB_SUSPEND and plug in a bad device which causes over-current condition to the root port, software will not be noticed. The reason is that current code don't set hub->change_bits in hub_activate() when over-current happens, and then hub_events() will not check the port status because it thinks nothing changed. If CONFIG_USB_SUSPEND is disabled, the interrupt pipe of the hub will report the change and set hub->event_bits, and then hub_events() will check what events happened.In this case over-current can be detected. Signed-off-by: Shen Guang <shenguang10@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 08d1dec6f4054e3613f32051d9b149d4203ce0d2 upstream.

When we are doing compliance test with xHCI, we found that if we
enable CONFIG_USB_SUSPEND and plug in a bad device which causes
over-current condition to the root port, software will not be noticed.
The reason is that current code don't set hub->change_bits in
hub_activate() when over-current happens, and then hub_events() will
not check the port status because it thinks nothing changed.
If CONFIG_USB_SUSPEND is disabled, the interrupt pipe of the hub will
report the change and set hub->event_bits, and then hub_events() will
check what events happened.In this case over-current can be detected.

Signed-off-by: Shen Guang <shenguang10@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Frans Klaver <fransklaver@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: hub: take hub->hdev reference when processing from eventlist 2014-10-05T21:54:10+00:00 Joe Lawrence joe.lawrence@stratus.com 2014-09-10T19:07:50+00:00 14200eade5653f9e8bbcb1137e6ce15ae365efa7 commit c605f3cdff53a743f6d875b76956b239deca1272 upstream. During surprise device hotplug removal tests, it was observed that hub_events may try to call usb_lock_device on a device that has already been freed. Protect the usb_device by taking out a reference (under the hub_event_lock) when hub_events pulls it off the list, returning the reference after hub_events is finished using it. Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com> Suggested-by: David Bulkow <david.bulkow@stratus.com> for using kref Suggested-by: Alan Stern <stern@rowland.harvard.edu> for placement Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c605f3cdff53a743f6d875b76956b239deca1272 upstream.

During surprise device hotplug removal tests, it was observed that
hub_events may try to call usb_lock_device on a device that has already
been freed. Protect the usb_device by taking out a reference (under the
hub_event_lock) when hub_events pulls it off the list, returning the
reference after hub_events is finished using it.

Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com>
Suggested-by: David Bulkow <david.bulkow@stratus.com> for using kref
Suggested-by: Alan Stern <stern@rowland.harvard.edu> for placement
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: fix build error with CONFIG_PM_RUNTIME disabled 2014-09-05T23:28:37+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2014-08-27T23:55:29+00:00 3d81c4733b6b25c0b99c3c3c16cfd93183c27b03 commit a9ef803d740bfadf5e505fbc57efa57692e27025 upstream. commit bdd405d2a528 ("usb: hub: Prevent hub autosuspend if usbcore.autosuspend is -1") causes a build error if CONFIG_PM_RUNTIME is disabled. Fix that by doing a simple #ifdef guard around it. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: kbuild test robot <fengguang.wu@intel.com> Cc: Roger Quadros <rogerq@ti.com> Cc: Michael Welling <mwelling@emacinc.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a9ef803d740bfadf5e505fbc57efa57692e27025 upstream.

commit bdd405d2a528 ("usb: hub: Prevent hub autosuspend if
usbcore.autosuspend is -1") causes a build error if CONFIG_PM_RUNTIME is
disabled.  Fix that by doing a simple #ifdef guard around it.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Roger Quadros <rogerq@ti.com>
Cc: Michael Welling <mwelling@emacinc.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>