linux-toradex.git/drivers/usb/dwc2/core.h, branch v4.1.20 Linux kernel for Apalis and Colibri modules usb: dwc2: rework initialization of host and gadget in dual-role mode 2015-03-12T17:18:49+00:00 Marek Szyprowski m.szyprowski@samsung.com 2015-03-10T12:41:10+00:00 e39af88f18dfe9a7938765c97ce9ed448915e6d5 If device is configured to work only in HOST or DEVICE mode, there is no point in initializing both subdrivers. This patch also fixes resource leakage if host subdriver fails to initialize. Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com> 
If device is configured to work only in HOST or DEVICE mode, there is
no point in initializing both subdrivers. This patch also fixes
resource leakage if host subdriver fails to initialize.

Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
usb: dwc2: gadget: add reset flag in init function 2015-01-30T16:32:41+00:00 Gregory Herrero gregory.herrero@intel.com 2015-01-30T08:09:32+00:00 643cc4dee1ee804b46f8d288babca046cca7e099 Add a flag to request physical reset of the controller when s3c_hsotg_core_init_disconnected is called. During the usb reset, controller must not be fully reconfigured and resetted. Else this leads to shorter chirp-k duration during enumeration. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com> 
Add a flag to request physical reset of the controller when
s3c_hsotg_core_init_disconnected is called.
During the usb reset, controller must not be fully reconfigured and
resetted. Else this leads to shorter chirp-k duration during
enumeration.

Tested-by: Robert Baldyga <r.baldyga@samsung.com>
Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Gregory Herrero <gregory.herrero@intel.com>
Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
usb: dwc2: gadget: add unaligned buffers support 2015-01-30T16:31:13+00:00 Mian Yousaf Kaukab yousaf.kaukab@intel.com 2015-01-30T08:09:31+00:00 7d24c1b5a77c71d885fca047d1f25721f6b366e7 When using DMA, dwc2 requires buffers to be 4 bytes aligned. Use bounce buffers if they are not. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com> 
When using DMA, dwc2 requires buffers to be 4 bytes aligned. Use
bounce buffers if they are not.

Tested-by: Robert Baldyga <r.baldyga@samsung.com>
Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
usb: dwc2: gadget: add TEST_MODE feature support 2015-01-30T16:30:44+00:00 Gregory Herrero gregory.herrero@intel.com 2015-01-30T08:09:28+00:00 9e14d0a566f48d33a9253096963b3b8199e4df57 Handle SET_FEATURE TEST_MODE request sent by the host. Slightly rework FEATURE request handling to allow parsing other request types than Endpoint. Also add a debugfs to change test mode value from user space. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com> 
Handle SET_FEATURE TEST_MODE request sent by the host.
Slightly rework FEATURE request handling to allow parsing
other request types than Endpoint.
Also add a debugfs to change test mode value from user space.

Tested-by: Robert Baldyga <r.baldyga@samsung.com>
Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Gregory Herrero <gregory.herrero@intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
usb: dwc2: gadget: rename sent_zlp to send_zlp 2015-01-12T21:34:27+00:00 Mian Yousaf Kaukab yousaf.kaukab@intel.com 2015-01-09T12:39:03+00:00 8a20fa457eb5a8d247fd82d4bd3c04225fd2f253 This flag is set before sending the zlp. So use present tense instead of the past tense. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com> 
This flag is set before sending the zlp. So use present tense instead
of the past tense.

Tested-by: Robert Baldyga <r.baldyga@samsung.com>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
usb: dwc2: gadget: manage ep0 state in software 2015-01-12T21:34:03+00:00 Mian Yousaf Kaukab yousaf.kaukab@intel.com 2015-01-09T12:38:58+00:00 fe0b94abcdf6d80bd575e91baf1e0f85a4978d49 Manage ep0 state in software to add handling of status OUT stage. Just toggling hsotg->setup in s3c_hsotg_handle_outdone leaves it in wrong state in 2-stage control transfers. Moreover, ensure that for setup-packet s3c_hsotg_handle_outdone is called either from SetupDone or OutDone but not both. Dwc2 ip v3.00a generates both SetupDone and OutDone on setup packets. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com> 
Manage ep0 state in software to add handling of status OUT stage.
Just toggling hsotg->setup in s3c_hsotg_handle_outdone leaves it in
wrong state in 2-stage control transfers.
Moreover, ensure that for setup-packet s3c_hsotg_handle_outdone is
called either from SetupDone or OutDone but not both. Dwc2 ip v3.00a
generates both SetupDone and OutDone on setup packets.

Tested-by: Robert Baldyga <r.baldyga@samsung.com>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
usb: dwc2: gadget: remove unused members from hsotg_req 2015-01-12T21:33:39+00:00 Mian Yousaf Kaukab yousaf.kaukab@intel.com 2015-01-09T12:38:54+00:00 ea5a8774a273c62047abb3cb5cca69c8368d05da These members are only occupying space. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com> 
These members are only occupying space.

Tested-by: Robert Baldyga <r.baldyga@samsung.com>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
usb: dwc2: gadget: configure fifos from device tree 2015-01-12T21:33:30+00:00 Gregory Herrero gregory.herrero@intel.com 2015-01-09T12:38:52+00:00 0a176279db6817cf865ed4c685e4a414be8226fd As fifo size can vary between SOCs, add possibility to configure them from device tree. Fifo sizes used by the legacy driver will be used If they are not provided by the device tree. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Reviewed-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com> 
As fifo size can vary between SOCs, add possibility to configure
them from device tree. Fifo sizes used by the legacy driver will
be used If they are not provided by the device tree.

Tested-by: Robert Baldyga <r.baldyga@samsung.com>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Gregory Herrero <gregory.herrero@intel.com>
Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com>
Reviewed-by: Robert Baldyga <r.baldyga@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
usb: dwc2: gadget: add bi-directional endpoint support 2015-01-12T21:33:17+00:00 Mian Yousaf Kaukab yousaf.kaukab@intel.com 2015-01-09T12:38:50+00:00 c6f5c050e2a7f6776ffa5594b6b2eedbf0137fe8 GHWCFG1 provides hardware configuration of each endpoint. Use it to configure the endpoints instead of assuming all even endpoint are OUT and all odd endpoints are IN. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com> 
GHWCFG1 provides hardware configuration of each endpoint. Use
it to configure the endpoints instead of assuming all even
endpoint are OUT and all odd endpoints are IN.

Tested-by: Robert Baldyga <r.baldyga@samsung.com>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
usb: dwc2: gadget: add device tree property to enable dma 2015-01-12T21:33:04+00:00 Gregory Herrero gregory.herrero@intel.com 2015-01-09T12:38:48+00:00 edd74be83047f439e9507cedbbbef0891f3a9a48 * Add an of specific function to parse device node properties. * Enable dma usage only if device tree property 'g_use_dma' is present. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com> 
* Add an of specific function to parse device node properties.
* Enable dma usage only if device tree property 'g_use_dma' is present.

Tested-by: Robert Baldyga <r.baldyga@samsung.com>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Gregory Herrero <gregory.herrero@intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>