commit 06f9b6e59661cee510b04513b13ea7927727d758 upstream. Around DWC USB3 2.30a release another bit has been added to the Device-Specific Event (DEVT) Event Information (EvtInfo) bitfield. Because of that, what used to be 8 bits long, has become 9 bits long. Per dwc3 2.30a+ spec in the Device-Specific Event (DEVT), the field of Event Information Bits(EvtInfo) uses [24:16] bits, and it has 9 bits not 8 bits. And the following reserved field uses [31:25] bits not [31:24] bits, and it has 7 bits. So in dwc3_event_devt, the bit mask should be: event_info [24:16] 9 bits reserved31_25 [31:25] 7 bits This patch makes sure that newer core releases will work fine with Linux and that we will decode the event information properly on new core releases. [ balbi@ti.com : improve commit log a bit ] Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1974d494dea05ea227cb42f5e918828801e237aa upstream. Per dwc3 2.50a spec, the is_devspec bit is used to distinguish the Device Endpoint-Specific Event or Device-Specific Event (DEVT). If the bit is 1, the event is represented Device-Specific Event, then use [7:1] bits as Device Specific Event to marked the type. It has 7 bits, and we can see the reserved8_31 variable name which means from 8 to 31 bits marked reserved, actually there are 24 bits not 25 bits between that. And 1 + 7 + 24 = 32, the event size is 4 byes. So in dwc3_event_type, the bit mask should be: is_devspec [0] 1 bit type [7:1] 7 bits reserved8_31 [31:8] 24 bits This patch should be backported to kernels as old as 3.2, that contain the commit 72246da40f3719af3bfd104a2365b32537c27d83 "usb: Introduce DesignWare USB3 DRD Driver". Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the wrong OTG_EVT,OTG_EVTEN and OTG_STS register offsets. While at that, also add a missing register to debugfs regdump utility. Signed-off-by: George Cherian <george.cherian@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
hwparams2 holds the number of endpoints which were selected during RTL generation, we can use that on our driver. Signed-off-by: Felipe Balbi <balbi@ti.com>
Some new revisions of the DWC3 core have been released, let's add our defines to help implementing known erratas. Signed-off-by: Felipe Balbi <balbi@ti.com>
We can reuse the generic implementation via our struct usb_gadget. Signed-off-by: Felipe Balbi <balbi@ti.com>
we can cache the last read value of the event buffer count register on this field, for later handling. Signed-off-by: Felipe Balbi <balbi@ti.com>
that way we know if a particular event buffer has pending events, or not. Signed-off-by: Felipe Balbi <balbi@ti.com>
that irq field has been removed already. This patch just removes its documentation. Signed-off-by: Felipe Balbi <balbi@ti.com>
Add support for basic power management on the dwc3 driver. While there is still lots to improve for full PM support, this minimal patch will already make sure that we survive suspend-to-ram and suspend-to-disk without major issues. Cc: Vikas C Sajjan <vikas.sajjan@linaro.org> Tested-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>