linux-toradex.git/drivers/usb/dwc3, branch v3.10.78

usb: dwc3: gadget: Stop TRB preparation after limit is reached

2015-01-27T15:52:32+00:00

commit 39e60635a01520e8c8ed3946a28c2b98e6a46f79 upstream.

DWC3 gadget sets up a pool of 32 TRBs for each EP during initialization. This
means, the max TRBs that can be submitted for an EP is fixed to 32. Since the
request queue for an EP is a linked list, any number of requests can be queued
to it by the gadget layer.  However, the dwc3 driver must not submit TRBs more
than the pool it has created for. This limit wasn't respected when SG was used
resulting in submitting more than the max TRBs, eventually leading to
non-transfer of the TRBs submitted over the max limit.

Root cause:
When SG is used, there are two loops iterating to prepare TRBs:
 - Outer loop over the request_list
 - Inner loop over the SG list
The code was missing break to get out of the outer loop.

Fixes: eeb720fb21d6 (usb: dwc3: gadget: add support for SG lists)
Signed-off-by: Amit Virdi 
Signed-off-by: Felipe Balbi 
Signed-off-by: Greg Kroah-Hartman

usb: dwc3: gadget: Fix TRB preparation during SG

2015-01-27T15:52:32+00:00

commit ec512fb8e5611fed1df2895f90317ce6797d6b32 upstream.

When scatter gather (SG) is used, multiple TRBs are prepared from one DWC3
request (dwc3_request). So while preparing TRBs, the 'last' flag should be set
only when it is the last TRB being prepared from the last dwc3_request entry.

The current implementation uses list_is_last to check if the dwc3_request is the
last entry from the request_list. However, list_is_last returns false for the
last entry too. This is because, while preparing the first TRB from a request,
the function dwc3_prepare_one_trb modifies the request's next and prev pointers
while moving the URB to req_queued. Hence, list_is_last always returns false no
matter what.

The correct way is not to access the modified pointers of dwc3_request but to
use list_empty macro instead.

Fixes: e5ba5ec833aa (usb: dwc3: gadget: fix scatter gather implementation)
Signed-off-by: Amit Virdi 
Signed-off-by: Felipe Balbi 
Signed-off-by: Greg Kroah-Hartman

usb: dwc3: gadget: fix set_halt() bug with pending transfers

2014-11-14T16:48:00+00:00

[ Upstream commit 7a60855972f0d3c014093046cb6f013a1ee5bb19 ]

According to our Gadget Framework API documentation,
->set_halt() *must* return -EAGAIN if we have pending
transfers (on either direction) or FIFO isn't empty (on
TX endpoints).

Fix this bug so that the mass storage gadget can be used
without stall=0 parameter.

This patch should be backported to all kernels since v3.2.

Suggested-by: Alan Stern 
Signed-off-by: Felipe Balbi 
Signed-off-by: Greg Kroah-Hartman

usb: dwc3: gadget: Properly initialize LINK TRB

2014-11-14T16:47:59+00:00

commit 1200a82a59b6aa65758ccc92c3447b98c53cd7a2 upstream.

On ISOC endpoints the last trb_pool entry used as a
LINK TRB is not getting zeroed out correctly due to
memset being called incorrectly and in the wrong place.
If pool allocated from DMA was not zero-initialized
to begin with this will result in the size and ctrl
values being random garbage. Call memset correctly after
assignment of the trb_link pointer.

Fixes: f6bafc6a1c ("usb: dwc3: convert TRBs into bitshifts")
Signed-off-by: Jack Pham 
Signed-off-by: Felipe Balbi 
Signed-off-by: Greg Kroah-Hartman

usb: dwc3: core: fix ordering for PHY suspend

2014-10-05T21:54:13+00:00

commit dc99f16f076559235c92d3eb66d03d1310faea08 upstream.

We can't suspend the PHYs before dwc3_core_exit_mode()
has been called, that's because the host and/or device
sides might still need to communicate with the far end
link partner.

Fixes: 8ba007a (usb: dwc3: core: enable the USB2 and USB3 phy in probe)
Suggested-by: Alan Stern 
Signed-off-by: Felipe Balbi 
Signed-off-by: Greg Kroah-Hartman

usb: dwc3: core: fix order of PM runtime calls

2014-10-05T21:54:13+00:00

commit fed33afce0eda44a46ae24d93aec1b5198c0bac4 upstream.

Currently, we disable pm_runtime before all register
accesses are done, this is dangerous and might lead
to abort exceptions due to the driver trying to access
a register which is clocked by a clock which was long
gated.

Fix that by moving pm_runtime_put_sync() and pm_runtime_disable()
as the last thing we do before returning from our ->remove()
method.

Fixes: 72246da (usb: Introduce DesignWare USB3 DRD Driver)
Signed-off-by: Felipe Balbi 
Signed-off-by: Greg Kroah-Hartman

usb: dwc3: omap: fix ordering for runtime pm calls

2014-10-05T21:54:10+00:00

commit 81a60b7f5c143ab3cdcd9943c9b4b7c63c32fc31 upstream.

we don't to gate clocks until our children are
done with their remove path.

Fixes: af310e9 (usb: dwc3: omap: use runtime API's to enable clocks)
Signed-off-by: Felipe Balbi 
Signed-off-by: Greg Kroah-Hartman

usb: dwc3: gadget: clear stall when disabling endpoint

2014-07-01T03:09:41+00:00

commit 687ef9817df7ed960d14575b9033dde3d04631fe upstream.

so it seems like DWC3 IP doesn't clear stalls
automatically when we disable an endpoint, because
of that, we _must_ make sure stalls are cleared
before clearing the proper bit in DALEPENA register.

Reported-by: Johannes Stezenbach 
Signed-off-by: Felipe Balbi 
Signed-off-by: Greg Kroah-Hartman

usb: dwc3: fix wrong bit mask in dwc3_event_devt

2014-05-06T14:55:31+00:00

commit 06f9b6e59661cee510b04513b13ea7927727d758 upstream.

Around DWC USB3 2.30a release another bit has been added to the
Device-Specific Event (DEVT) Event Information (EvtInfo) bitfield.

Because of that, what used to be 8 bits long, has become 9 bits long.

Per dwc3 2.30a+ spec in the Device-Specific Event (DEVT), the field of
Event Information Bits(EvtInfo) uses [24:16] bits, and it has 9 bits
not 8 bits. And the following reserved field uses [31:25] bits not
[31:24] bits, and it has 7 bits.

So in dwc3_event_devt, the bit mask should be:
event_info	[24:16]		9 bits
reserved31_25	[31:25]		7 bits

This patch makes sure that newer core releases will work fine with
Linux and that we will decode the event information properly on new
core releases.

[ balbi@ti.com : improve commit log a bit ]

Signed-off-by: Huang Rui 
Signed-off-by: Felipe Balbi 
Signed-off-by: Greg Kroah-Hartman

usb: dwc3: fix implementation of endpoint wedge

2013-12-20T15:45:08+00:00

commit a535d81c92615b8ffb99b7e1fd1fb01effaed1af upstream.

The dwc3 UDC driver doesn't implement endpoint wedging correctly.
When an endpoint is wedged, the gadget driver should be allowed to
clear the wedge by calling usb_ep_clear_halt().  Only the host is
prevented from resetting the endpoint.

This patch fixes the implementation.

Signed-off-by: Alan Stern 
Tested-by: Pratyush Anand 
Signed-off-by: Felipe Balbi 
Signed-off-by: Greg Kroah-Hartman