USB: Gadget: changes for 3.4 This merge is rather big. Here's what it contains: For am5536udc we have just simple coding style fixes. Nothing that has any potential to cause any issues going forward. With mv_udc, there's only one single change removing an unneeded NULL check. at91_udc also only saw a single change this merge window, and that's only removing a duplicated header. The Renesas controller has a few more involved changes. Support for SUDMAC was added, there's now a special handling of IRQ resources for when the IRQ line is shared between Renesas controller and SUDMAC, we also had a bug fix where Renesas controller would sleep in atomic context while doing DMA transfers from a tasklet. There were also a set of minor cleanups. The FSL UDC also had a scheduling in atomic context bug fix, but that's all. Thanks to Sebastian, the dummy_hcd now works better than ever with support for scatterlists and streams. Sebastian also added SuperSpeed descriptors to the serial gadgets. The highlight on this merge is the addition of a generic API for mapping and unmapping usb_requests. This will avoid code duplication on all UDC controllers and also kills all the defines for DMA_ADDR_INVALID which UDC controllers sprinkled around. A few of the UDC controllers were already converted to use this new API. Conflicts: drivers/usb/dwc3/gadget.c
This replaces the remaining defines which are available in "public" include/ directory and are re-defined by the storage gadget. This is patch is basicaly search & replace followed by the removal of the defines. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This moves the BOT data structures for CBW and CSW from drivers internal header file to global include able file in include/. The storage gadget is using the same name for CSW but a different for CBW so I fix it up properly. The same goes for the ub driver and keucr driver in staging. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix some endian issues for storage gadgets. Cc: stable@vger.kernel.org Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
The m.nazarewicz@samsung.com email address is no longer valid, so this commit replaces it with mina86@mina86.com which is employer-agnostic and thus should be valid for foreseeable feature. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
this patch adds superspeed descriptors for the storage gadgets. Acked-by: Michal Nazarewicz <mina86@mina86.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Felipe Balbi <balbi@ti.com>
* 'for-next' of git://gitorious.org/usb/usb: (47 commits) usb: musb: Enable DMA mode1 RX for transfers without short packets usb: musb: fix build breakage usb: gadget: audio: queue wLength-sized requests usb: gadget: audio: actually support both speeds usb: gadget: storage: make FSG_NUM_BUFFERS variable size USB: gadget: storage: remove alignment assumption usb: gadget: storage: adapt logic block size to bound block devices usb: dwc3: gadget: improve debug on link state change usb: dwc3: omap: set idle and standby modes usb: dwc3: ep0: introduce ep0_expect_in flag usb: dwc3: ep0: giveback requests on stall_and_restart usb: dwc3: gadget: drop the useless dma_sync_single* calls usb: dwc3: gadget: fix GCTL programming usb: dwc3: define ScaleDown macro helper usb: dwc3: Fix definition of DWC3_GCTL_U2RSTECN usb: dwc3: gadget: do not map/unmap ZLP transfers usb: dwc3: omap: fix IRQ handling usb: dwc3: omap: change IRQ name to dwc3-omap usb: dwc3: add module.h to dwc3-omap.c and core.c usb: dwc3: omap: distinguish between SW and HW modes ...
remove the following two paragraphs as they are not needed: This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc.,59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. Signed-off-by: Klaus Schwarzkopf <schwarzkopf@sensortherm.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
FSG_NUM_BUFFERS is set to 2 as default. Usually 2 buffers are enough to establish a good buffering pipeline. The number may be increased in order to compensate a for bursty VFS behaviour. Here follows a description of system that may require more than 2 buffers. * CPU ondemand governor active * latency cost for wake up and/or frequency change * DMA for IO Use case description. * Data transfer from MMC via VFS to USB. * DMA shuffles data from MMC and to USB. * The CPU wakes up every now and then to pass data in and out from VFS, which cause the bursty VFS behaviour. Test set up * Running dd on the host reading from the mass storage device * cmdline: dd if=/dev/sdb of=/dev/null bs=4k count=$((256*100)) * Caches are dropped on the host and on the device before each run Measurements on a Snowball board with ondemand_governor active. FSG_NUM_BUFFERS 2 104857600 bytes (105 MB) copied, 5.62173 s, 18.7 MB/s 104857600 bytes (105 MB) copied, 5.61811 s, 18.7 MB/s 104857600 bytes (105 MB) copied, 5.57817 s, 18.8 MB/s FSG_NUM_BUFFERS 4 104857600 bytes (105 MB) copied, 5.26839 s, 19.9 MB/s 104857600 bytes (105 MB) copied, 5.2691 s, 19.9 MB/s 104857600 bytes (105 MB) copied, 5.2711 s, 19.9 MB/s There may not be one optimal number for all boards. This is why the number is added to Kconfig. If selecting USB_GADGET_DEBUG_FILES this value may be set by a module parameter as well. Signed-off-by: Per Forlin <per.forlin@linaro.org> Acked-by: Michal Nazarewicz <mina86@mina86.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Felipe Balbi <balbi@ti.com>
Now the mass storage driver has fixed logic block size of 512 bytes. The mass storage gadget read/write bound devices only through VFS, so the bottom level devices actually are just RAW devices to the driver and connected PC. As a RAW, hosts can always format, read and write it right in 512 bytes logic block and don't care about the actual logic block size of devices bound to the gadget. But if we want to share the bound block device partition between target board and PC, in case the logic block size of the bound block device is 4KB, we execute the following steps: 1. connect a board with mass storage gadget to PC(the board has set one partition of on-board block device as file name of the mass storage) 2. PC format the mass storage to VFAT by default logic block size and read/write it 3. disconnect boards from PC 4. target board mount the partition as VFAT Step 4 will fail since kernel on target thinks the logic block size of the bound partition as 4KB. A typical error is "FAT: logical sector size too small for device (logical sector size = 512)" If we execute opposite steps: 1. format the partition to VFAT on target board and read/write this partition 2. connect the board to Windows PC as usb mass storage gadget, windows will think the disk is not formatted So the conclusion is that only as a gadget, the mass storage driver has no any problem. But being shared VFAT or other filesystem on PC and target board, it will fail. This patch adapts logic block size to bound block devices and fix the issue. Cc: Michal Nazarewicz <mina86@mina86.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Peiyu Li <peiyu.li@csr.com> Signed-off-by: Xianglong Du <xianglong.du@csr.com> Signed-off-by: Huayi Li <huayi.li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Felipe Balbi <balbi@ti.com>