linux-toradex.git/drivers/usb/gadget, branch v4.4.115

usb: f_fs: Prevent gadget unbind if it is already unbound

2018-02-03T16:04:30+00:00

commit ce5bf9a50daf2d9078b505aca1cea22e88ecb94a upstream.

Upon usb composition switch there is possibility of ep0 file
release happening after gadget driver bind. In case of composition
switch from adb to a non-adb composition gadget will never gets
bound again resulting into failure of usb device enumeration. Fix
this issue by checking FFS_FL_BOUND flag and avoid extra
gadget driver unbind if it is already done as part of composition
switch.

This fixes adb reconnection error reported on Android running
v4.4 and above kernel versions. Verified on Hikey running vanilla
v4.15-rc7 + few out of tree Mali patches.

Reviewed-at: https://android-review.googlesource.com/#/c/582632/

Cc: Felipe Balbi 
Cc: Greg KH 
Cc: Michal Nazarewicz 
Cc: John Stultz 
Cc: Dmitry Shmidt 
Cc: Badhri 
Cc: Android Kernel Team 
Signed-off-by: Hemant Kumar 
[AmitP: Cherry-picked it from android-4.14 and updated the commit log]
Signed-off-by: Amit Pundir 
Signed-off-by: Greg Kroah-Hartman

usb: gadget: don't dereference g until after it has been null checked

2018-02-03T16:04:29+00:00

[ Upstream commit b2fc059fa549fe6881d4c1f8d698b0f50bcd16ec ]

Avoid dereferencing pointer g until after g has been sanity null checked;
move the assignment of cdev much later when it is required into a more
local scope.

Detected by CoverityScan, CID#1222135 ("Dereference before null check")

Fixes: b785ea7ce662 ("usb: gadget: composite: fix ep->maxburst initialization")
Signed-off-by: Colin Ian King 
Signed-off-by: Felipe Balbi 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

usb: gadget: udc: remove pointer dereference after free

2017-12-25T13:22:10+00:00

[ Upstream commit 1f459262b0e1649a1e5ad12fa4c66eb76c2220ce ]

Remove pointer dereference after free.

Addresses-Coverity-ID: 1091173
Acked-by: Michal Nazarewicz 
Signed-off-by: Gustavo A. R. Silva 
Signed-off-by: Felipe Balbi 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

usb: gadget: f_uvc: Sanity check wMaxPacketSize for SuperSpeed

2017-12-25T13:22:10+00:00

[ Upstream commit 16bb05d98c904a4f6c5ce7e2d992299f794acbf2 ]

As per USB3.0 Specification "Table 9-20. Standard Endpoint Descriptor",
for interrupt and isochronous endpoints, wMaxPacketSize must be set to
1024 if the endpoint defines bMaxBurst to be greater than zero.

Reviewed-by: Laurent Pinchart 
Signed-off-by: Roger Quadros 
Signed-off-by: Felipe Balbi 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

usb: gadget: ffs: Forbid usb_ep_alloc_request from sleeping

2017-12-16T09:33:57+00:00

commit 30bf90ccdec1da9c8198b161ecbff39ce4e5a9ba upstream.

Found using DEBUG_ATOMIC_SLEEP while submitting an AIO read operation:

[  100.853642] BUG: sleeping function called from invalid context at mm/slab.h:421
[  100.861148] in_atomic(): 1, irqs_disabled(): 1, pid: 1880, name: python
[  100.867954] 2 locks held by python/1880:
[  100.867961]  #0:  (&epfile->mutex){....}, at: [] ffs_mutex_lock+0x27/0x30 [usb_f_fs]
[  100.868020]  #1:  (&(&ffs->eps_lock)->rlock){....}, at: [] ffs_epfile_io.isra.17+0x24b/0x590 [usb_f_fs]
[  100.868076] CPU: 1 PID: 1880 Comm: python Not tainted 4.14.0-edison+ #118
[  100.868085] Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 2015.01.21:18.19.48
[  100.868093] Call Trace:
[  100.868122]  dump_stack+0x47/0x62
[  100.868156]  ___might_sleep+0xfd/0x110
[  100.868182]  __might_sleep+0x68/0x70
[  100.868217]  kmem_cache_alloc_trace+0x4b/0x200
[  100.868248]  ? dwc3_gadget_ep_alloc_request+0x24/0xe0 [dwc3]
[  100.868302]  dwc3_gadget_ep_alloc_request+0x24/0xe0 [dwc3]
[  100.868343]  usb_ep_alloc_request+0x16/0xc0 [udc_core]
[  100.868386]  ffs_epfile_io.isra.17+0x444/0x590 [usb_f_fs]
[  100.868424]  ? _raw_spin_unlock_irqrestore+0x27/0x40
[  100.868457]  ? kiocb_set_cancel_fn+0x57/0x60
[  100.868477]  ? ffs_ep0_poll+0xc0/0xc0 [usb_f_fs]
[  100.868512]  ffs_epfile_read_iter+0xfe/0x157 [usb_f_fs]
[  100.868551]  ? security_file_permission+0x9c/0xd0
[  100.868587]  ? rw_verify_area+0xac/0x120
[  100.868633]  aio_read+0x9d/0x100
[  100.868692]  ? __fget+0xa2/0xd0
[  100.868727]  ? __might_sleep+0x68/0x70
[  100.868763]  SyS_io_submit+0x471/0x680
[  100.868878]  do_int80_syscall_32+0x4e/0xd0
[  100.868921]  entry_INT80_32+0x2a/0x2a
[  100.868932] EIP: 0xb7fbb676
[  100.868941] EFLAGS: 00000292 CPU: 1
[  100.868951] EAX: ffffffda EBX: b7aa2000 ECX: 00000002 EDX: b7af8368
[  100.868961] ESI: b7fbb660 EDI: b7aab000 EBP: bfb6c658 ESP: bfb6c638
[  100.868973]  DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b

Signed-off-by: Vincent Pelletier 
Signed-off-by: Felipe Balbi 
Signed-off-by: Siqi Lin 
Signed-off-by: Greg Kroah-Hartman

USB: gadgetfs: Fix a potential memory leak in 'dev_config()'

2017-12-16T09:33:52+00:00

[ Upstream commit b6e7aeeaf235901c42ec35de4633c7c69501d303 ]

'kbuf' is allocated just a few lines above using 'memdup_user()'.
If the 'if (dev->buf)' test fails, this memory is never released.

Signed-off-by: Christophe JAILLET 
Signed-off-by: Felipe Balbi 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

usb: gadget: configs: plug memory leak

2017-12-16T09:33:52+00:00

[ Upstream commit 38355b2a44776c25b0f2ad466e8c51bb805b3032 ]

When binding a gadget to a device, "name" is stored in gi->udc_name, but
this does not happen when unregistering and the string is leaked.

Signed-off-by: John Keeping 
Signed-off-by: Felipe Balbi 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

usb: gadget: composite: Fix use-after-free in usb_composite_overwrite_options

2017-10-18T07:20:42+00:00

commit aec17e1e249567e82b26dafbb86de7d07fde8729 upstream.

KASAN enabled configuration reports an error

    BUG: KASAN: use-after-free in usb_composite_overwrite_options+...
                [libcomposite] at addr ...
    Read of size 1 by task ...

when some driver is un-bound and then bound again.
For example, this happens with FunctionFS driver when "ffs-test"
test application is run several times in a row.

If the driver has empty manufacturer ID string in initial static data,
it is then replaced with generated string. After driver unbinding
the generated string is freed, but the driver data still keep that
pointer. And if the driver is then bound again, that pointer
is re-used for string emptiness check.

The fix is to clean up the driver string data upon its unbinding
to drop the pointer to freed memory.

Fixes: cc2683c318a5 ("usb: gadget: Provide a default implementation of default manufacturer string")
Signed-off-by: Andrew Gabbasov 
Signed-off-by: Felipe Balbi 
Signed-off-by: Greg Kroah-Hartman

USB: dummy-hcd: Fix deadlock caused by disconnect detection

2017-10-18T07:20:41+00:00

commit ab219221a5064abfff9f78c323c4a257b16cdb81 upstream.

The dummy-hcd driver calls the gadget driver's disconnect callback
under the wrong conditions.  It should invoke the callback when Vbus
power is turned off, but instead it does so when the D+ pullup is
turned off.

This can cause a deadlock in the composite core when a gadget driver
is unregistered:

[   88.361471] ============================================
[   88.362014] WARNING: possible recursive locking detected
[   88.362580] 4.14.0-rc2+ #9 Not tainted
[   88.363010] --------------------------------------------
[   88.363561] v4l_id/526 is trying to acquire lock:
[   88.364062]  (&(&cdev->lock)->rlock){....}, at: [] composite_disconnect+0x43/0x100 [libcomposite]
[   88.365051]
[   88.365051] but task is already holding lock:
[   88.365826]  (&(&cdev->lock)->rlock){....}, at: [] usb_function_deactivate+0x29/0x80 [libcomposite]
[   88.366858]
[   88.366858] other info that might help us debug this:
[   88.368301]  Possible unsafe locking scenario:
[   88.368301]
[   88.369304]        CPU0
[   88.369701]        ----
[   88.370101]   lock(&(&cdev->lock)->rlock);
[   88.370623]   lock(&(&cdev->lock)->rlock);
[   88.371145]
[   88.371145]  *** DEADLOCK ***
[   88.371145]
[   88.372211]  May be due to missing lock nesting notation
[   88.372211]
[   88.373191] 2 locks held by v4l_id/526:
[   88.373715]  #0:  (&(&cdev->lock)->rlock){....}, at: [] usb_function_deactivate+0x29/0x80 [libcomposite]
[   88.374814]  #1:  (&(&dum_hcd->dum->lock)->rlock){....}, at: [] dummy_pullup+0x7d/0xf0 [dummy_hcd]
[   88.376289]
[   88.376289] stack backtrace:
[   88.377726] CPU: 0 PID: 526 Comm: v4l_id Not tainted 4.14.0-rc2+ #9
[   88.378557] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
[   88.379504] Call Trace:
[   88.380019]  dump_stack+0x86/0xc7
[   88.380605]  __lock_acquire+0x841/0x1120
[   88.381252]  lock_acquire+0xd5/0x1c0
[   88.381865]  ? composite_disconnect+0x43/0x100 [libcomposite]
[   88.382668]  _raw_spin_lock_irqsave+0x40/0x54
[   88.383357]  ? composite_disconnect+0x43/0x100 [libcomposite]
[   88.384290]  composite_disconnect+0x43/0x100 [libcomposite]
[   88.385490]  set_link_state+0x2d4/0x3c0 [dummy_hcd]
[   88.386436]  dummy_pullup+0xa7/0xf0 [dummy_hcd]
[   88.387195]  usb_gadget_disconnect+0xd8/0x160 [udc_core]
[   88.387990]  usb_gadget_deactivate+0xd3/0x160 [udc_core]
[   88.388793]  usb_function_deactivate+0x64/0x80 [libcomposite]
[   88.389628]  uvc_function_disconnect+0x1e/0x40 [usb_f_uvc]

This patch changes the code to test the port-power status bit rather
than the port-connect status bit when deciding whether to isue the
callback.

Signed-off-by: Alan Stern 
Reported-by: David Tulloh 
Signed-off-by: Felipe Balbi 
Signed-off-by: Greg Kroah-Hartman

USB: g_mass_storage: Fix deadlock when driver is unbound

2017-10-12T09:27:32+00:00

commit 1fbbb78f25d1291274f320462bf6908906f538db upstream.

As a holdover from the old g_file_storage gadget, the g_mass_storage
legacy gadget driver attempts to unregister itself when its main
operating thread terminates (if it hasn't been unregistered already).
This is not strictly necessary; it was never more than an attempt to
have the gadget fail cleanly if something went wrong and the main
thread was killed.

However, now that the UDC core manages gadget drivers independently of
UDC drivers, this scheme doesn't work any more.  A simple test:

	modprobe dummy-hcd
	modprobe g-mass-storage file=...
	rmmod dummy-hcd

ends up in a deadlock with the following backtrace:

 sysrq: SysRq : Show Blocked State
   task                PC stack   pid father
 file-storage    D    0  1130      2 0x00000000
 Call Trace:
  __schedule+0x53e/0x58c
  schedule+0x6e/0x77
  schedule_preempt_disabled+0xd/0xf
  __mutex_lock.isra.1+0x129/0x224
  ? _raw_spin_unlock_irqrestore+0x12/0x14
  __mutex_lock_slowpath+0x12/0x14
  mutex_lock+0x28/0x2b
  usb_gadget_unregister_driver+0x29/0x9b [udc_core]
  usb_composite_unregister+0x10/0x12 [libcomposite]
  msg_cleanup+0x1d/0x20 [g_mass_storage]
  msg_thread_exits+0xd/0xdd7 [g_mass_storage]
  fsg_main_thread+0x1395/0x13d6 [usb_f_mass_storage]
  ? __schedule+0x573/0x58c
  kthread+0xd9/0xdb
  ? do_set_interface+0x25c/0x25c [usb_f_mass_storage]
  ? init_completion+0x1e/0x1e
  ret_from_fork+0x19/0x24
 rmmod           D    0  1155    683 0x00000000
 Call Trace:
  __schedule+0x53e/0x58c
  schedule+0x6e/0x77
  schedule_timeout+0x26/0xbc
  ? __schedule+0x573/0x58c
  do_wait_for_common+0xb3/0x128
  ? usleep_range+0x81/0x81
  ? wake_up_q+0x3f/0x3f
  wait_for_common+0x2e/0x45
  wait_for_completion+0x17/0x19
  fsg_common_put+0x34/0x81 [usb_f_mass_storage]
  fsg_free_inst+0x13/0x1e [usb_f_mass_storage]
  usb_put_function_instance+0x1a/0x25 [libcomposite]
  msg_unbind+0x2a/0x42 [g_mass_storage]
  __composite_unbind+0x4a/0x6f [libcomposite]
  composite_unbind+0x12/0x14 [libcomposite]
  usb_gadget_remove_driver+0x4f/0x77 [udc_core]
  usb_del_gadget_udc+0x52/0xcc [udc_core]
  dummy_udc_remove+0x27/0x2c [dummy_hcd]
  platform_drv_remove+0x1d/0x31
  device_release_driver_internal+0xe9/0x16d
  device_release_driver+0x11/0x13
  bus_remove_device+0xd2/0xe2
  device_del+0x19f/0x221
  ? selinux_capable+0x22/0x27
  platform_device_del+0x21/0x63
  platform_device_unregister+0x10/0x1a
  cleanup+0x20/0x817 [dummy_hcd]
  SyS_delete_module+0x10c/0x197
  ? ____fput+0xd/0xf
  ? task_work_run+0x55/0x62
  ? prepare_exit_to_usermode+0x65/0x75
  do_fast_syscall_32+0x86/0xc3
  entry_SYSENTER_32+0x4e/0x7c

What happens is that removing the dummy-hcd driver causes the UDC core
to unbind the gadget driver, which it does while holding the udc_lock
mutex.  The unbind routine in g_mass_storage tells the main thread to
exit and waits for it to terminate.

But as mentioned above, when the main thread exits it tries to
unregister the mass-storage function driver.  Via the composite
framework this ends up calling usb_gadget_unregister_driver(), which
tries to acquire the udc_lock mutex.  The result is deadlock.

The simplest way to fix the problem is not to be so clever: The main
thread doesn't have to unregister the function driver.  The side
effects won't be so terrible; if the gadget is still attached to a USB
host when the main thread is killed, it will appear to the host as
though the gadget's firmware has crashed -- a reasonably accurate
interpretation, and an all-too-common occurrence for USB mass-storage
devices.

In fact, the code to unregister the driver when the main thread exits
is specific to g-mass-storage; it is not used when f-mass-storage is
included as a function in a larger composite device.  Therefore the
entire mechanism responsible for this (the fsg_operations structure
with its ->thread_exits method, the fsg_common_set_ops() routine, and
the msg_thread_exits() callback routine) can all be eliminated.  Even
the msg_registered bitflag can be removed, because now the driver is
unregistered in only one place rather than in two places.

Signed-off-by: Alan Stern 
Acked-by: Felipe Balbi 
Acked-by: Michal Nazarewicz 
Signed-off-by: Greg Kroah-Hartman