linux-toradex.git/drivers/usb/host/Kconfig, branch v4.4.73

usb-host: Remove fusbh200 driver

2015-10-17T06:44:33+00:00

fusbh200 and fotg210 are very similar. The initial idea was to consolidate
both drivers but I'm afraid fusbh200 is not being used.

This patch remove the fusbh200 source code, update Kconfig and two
Makefiles.

Signed-off-by: Peter Senna Tschudin 
Acked-by: John Chiang 
Signed-off-by: Greg Kroah-Hartman

USB: host: ohci-at91: depend on OF

2015-08-14T23:57:43+00:00

Make the driver depend on CONFIG_OF and remove the now useless #ifdef

Also, fix the Kconfig indentation.

Signed-off-by: Alexandre Belloni 
Acked-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman

usb: xhci: make USB_XHCI_PLATFORM selectable

2015-08-08T22:15:49+00:00

Right now xhci-plat-hcd can be built when using one of platform specific
drivers only (mvebu/rcar). There shouldn't be such limitation as some
platforms may not require any quirks and may want to just use a generic
driver ("generic-xhci" / "xhci-hcd").

Signed-off-by: Rafał Miłecki 
Signed-off-by: Mathias Nyman 
Signed-off-by: Greg Kroah-Hartman

Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

2015-06-27T19:44:34+00:00

Pull MIPS updates from Ralf Baechle:

 - Improvements to the tlb_dump code
 - KVM fixes
 - Add support for appended DTB
 - Minor improvements to the R12000 support
 - Minor improvements to the R12000 support
 - Various platform improvments for BCM47xx
 - The usual pile of minor cleanups
 - A number of BPF fixes and improvments
 - Some improvments to the support for R3000 and DECstations
 - Some improvments to the ATH79 platform support
 - A major patchset for the JZ4740 SOC adding support for the CI20 platform
 - Add support for the Pistachio SOC
 - Minor BMIPS/BCM63xx platform support improvments.
 - Avoid "SYNC 0" as memory barrier when unlocking spinlocks
 - Add support for the XWR-1750 board.
 - Paul's __cpuinit/__cpuinitdata cleanups.
 - New Malta CPU board support large memory so enable ZONE_DMA32.

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (131 commits)
  MIPS: spinlock: Adjust arch_spin_lock back-off time
  MIPS: asmmacro: Ensure 64-bit FP registers are used with MSA
  MIPS: BCM47xx: Simplify handling SPROM revisions
  MIPS: Cobalt Don't use module_init in non-modular MTD registration.
  MIPS: BCM47xx: Move NVRAM driver to the drivers/firmware/
  MIPS: use for_each_sg()
  MIPS: BCM47xx: Don't select BCMA_HOST_PCI
  MIPS: BCM47xx: Add helper variable for storing NVRAM length
  MIPS: IRQ/IP27: Move IRQ allocation API to platform code.
  MIPS: Replace smp_mb with release barrier function in unlocks.
  MIPS: i8259: DT support
  MIPS: Malta: Basic DT plumbing
  MIPS: include errno.h for ENODEV in mips-cm.h
  MIPS: Define GCR_GIC_STATUS register fields
  MIPS: BPF: Introduce BPF ASM helpers
  MIPS: BPF: Use BPF register names to describe the ABI
  MIPS: BPF: Move register definition to the BPF header
  MIPS: net: BPF: Replace RSIZE with SZREG
  MIPS: BPF: Free up some callee-saved registers
  MIPS: Xtalk: Update xwidget.h with known Xtalk device numbers
  ...

MIPS: Octeon: Set OHCI and EHCI MMIO byte order to match CPU

2015-06-21T19:54:19+00:00

The Octeon OHCI is now supported by the ohci-platform driver, and
USB_OCTEON_OHCI is marked as deprecated.  However, it is currently
still necessary to enable it in order to select
USB_OHCI_BIG_ENDIAN_MMIO.  Make CPU_CAVIUM_OCTEON select that as well,
so that USB_OCTEON_OHCI is really obsolete.

The old ohci-octeon and ehci-octeon drivers also only enabled big-endian
MMIO in case the CPU was big-endian.  Make the selections of
USB_EHCI_BIG_ENDIAN_MMIO and USB_OHCI_BIG_ENDIAN_MMIO conditional, to
match this.

Fixes: 2193dda5eec6 ("USB: host: Remove ehci-octeon and ohci-octeon drivers")
Signed-off-by: Ben Hutchings 
Cc: Alan Stern 
Cc: linux-mips@linux-mips.org
Cc: David Daney 
Cc: Chandrakala Chavva 
Cc: Paul Martin 
Patchwork: https://patchwork.linux-mips.org/patch/10178/
Signed-off-by: Ralf Baechle

drivers:usb:fsl:Make fsl ehci drv an independent driver module

2015-05-24T16:29:36+00:00

Make Freescale EHCI driver an independent entity from ehci-hcd.c.
This involves
	- using module_init/module_exit functions
	- using overrides structure
	- some necessary code cleanup

Signed-off-by: Ramneek Mehresh 
Acked-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman

ehci-msm: Remove dead dependency

2015-03-18T16:27:03+00:00

This dependency no longer exists now that mach-msm has been
removed. Delete it.

Cc: Greg Kroah-Hartman 
Cc: Alan Stern 
Cc: linux-usb@vger.kernel.org
Cc: David Brown 
Cc: Bryan Huntsman 
Cc: Daniel Walker 
Signed-off-by: Stephen Boyd 
Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-for-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

2015-02-04T19:03:20+00:00

Felipe writes:

usb: patches for v3.20 merge window

Here's the big pull request for Gadgets and PHYs. It's
a total of 217 non-merge commits with pretty much everything
being touched.

The most important bits are a ton of new documentation for
almost all usb gadget functions, a new isp1760 UDC driver,
several improvements to the old net2280 UDC driver, and
some minor tracepoint improvements to dwc3.

Other than that, a big list of minor cleanups, smaller bugfixes
and new features all over the place.

Signed-off-by: Felipe Balbi

usb: kconfig: replace PPC_OF with PPC

2015-02-03T23:28:32+00:00

The PPC_OF is a ppc specific option which is used to mean that the
firmware device tree access functions are available. Since all the
ppc platforms have a device tree, it is aways set to 'y' for ppc.
So it makes no sense to keep a such option in the current kernel.
Replace it with PPC

Signed-off-by: Kevin Hao 
Signed-off-by: Greg Kroah-Hartman

usb: isp1760: Move driver from drivers/usb/host/ to drivers/usb/isp1760/

2015-01-27T15:39:38+00:00

Now that this is DRD, it doesn't make sense to keep it under
drivers/usb/host.

Signed-off-by: Laurent Pinchart 
Signed-off-by: Felipe Balbi