linux-toradex.git/drivers/usb/host/Makefile, branch v5.14

usb: xhci-mtk: support to build xhci-mtk-hcd.ko

2021-03-10T08:37:17+00:00

Currently xhci-hcd.ko building depends on USB_XHCI_MTK, this
is not flexible for some cases. For example:
USB_XHCI_HCD is y, and USB_XHCI_MTK is m, then we can't
implement extended functions if only update xhci-mtk.ko
This patch is used to remove the dependence.

Acked-by: Mathias Nyman 
Signed-off-by: Chunfeng Yun 
Link: https://lore.kernel.org/r/0b62e21ddfacc1c2874726dd27ccab80c993f303.1615170625.git.chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman

usb: host: ehci-tegra: Remove the driver

2021-01-13T10:26:34+00:00

The ChipIdea driver now provides USB2 host mode support for NVIDIA Tegra
SoCs. The ehci-tegra driver is obsolete now, remove it and redirect the
older Kconfig entry to the CI driver.

Tested-by: Matt Merhar 
Tested-by: Nicolas Chauvet 
Tested-by: Peter Geis 
Tested-by: Ion Agorria 
Acked-by: Thierry Reding 
Acked-by: Alan Stern 
Acked-by: Peter Chen 
Signed-off-by: Dmitry Osipenko 
Link: https://lore.kernel.org/r/20201218120246.7759-9-digetx@gmail.com
Signed-off-by: Greg Kroah-Hartman

usb: host: ehci-mxc: Remove the driver

2020-11-13T23:28:16+00:00

The ehci-mxc driver was only used by i.MX non-DT platforms.

Since 5.10-rc1, i.MX has been converted to a DT-only platform and all
board files are gone.

Remove the ehci-mxc driver as there are no more users at all.

Acked-by: Alan Stern 
Signed-off-by: Fabio Estevam 
Link: https://lore.kernel.org/r/20201113171231.2205-1-festevam@gmail.com
Signed-off-by: Greg Kroah-Hartman

usb: host: imx21-hcd: Remove the driver

2020-11-13T14:22:46+00:00

Since commit 4b563a066611 ("ARM: imx: Remove imx21 support") the imx21
SoC is no longer supported.

Get rid of its USB driver too, which is now unused.

Acked-by: Peter Chen 
Signed-off-by: Fabio Estevam 
Link: https://lore.kernel.org/r/20201109210813.21382-1-festevam@gmail.com
Signed-off-by: Greg Kroah-Hartman

usb: renesas-xhci: Add the renesas xhci driver

2020-05-15T13:44:35+00:00

This add a new driver for renesas xhci which is basically a firmware
loader for uPD720201 and uPD720202 w/o ROM. The xhci-pci driver will
invoke this driver for loading/unloading on relevant devices.

This patch adds a firmware loader for the uPD720201K8-711-BAC-A
and uPD720202K8-711-BAA-A variant. Both of these chips are listed
in Renesas' R19UH0078EJ0500 Rev.5.00 "User's Manual: Hardware" as
devices which need the firmware loader on page 2 in order to
work as they "do not support the External ROM".

The "Firmware Download Sequence" is describe in chapter
"7.1 FW Download Interface" R19UH0078EJ0500 Rev.5.00 page 131.

The firmware "K2013080.mem" is available from a USB3.0 Host to
PCIe Adapter (PP2U-E card) "Firmware download" archive. An
alternative version can be sourced from Netgear's WNDR4700 GPL
archives.

The release notes of the PP2U-E's "Firmware Download" ver 2.0.1.3
(2012-06-15) state that the firmware is for the following devices:
 - uPD720201 ES 2.0 sample whose revision ID is 2.
 - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3.
 - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2.

[vkoul: fixed comments:
	used macros for timeout count and delay
	removed renesas_fw_alive_check
	cleaned renesas_fw_callback
	removed recursion for renesas_fw_download
	add register defines and field names
	move to a separate file
	make fw loader as sync probe so that we execute in probe and
        prevent race
	make xhci-pci-renesas a seprate module]

Signed-off-by: Christian Lamparter 
Signed-off-by: Bjorn Andersson 
Signed-off-by: Vinod Koul 
Link: https://lore.kernel.org/r/20200514122039.300417-3-vkoul@kernel.org
Signed-off-by: Greg Kroah-Hartman

usb: host: Add ability to build new Broadcom STB USB drivers

2020-05-13T12:29:09+00:00

Add the build system changes needed to get the Broadcom STB XHCI,
EHCI and OHCI functionality working. The OHCI support does not
require anything unique to Broadcom so the standard ohci-platform
driver is being used. Also update MAINTAINERS.

Signed-off-by: Al Cooper 
Reviewed-by: Florian Fainelli 
Link: https://lore.kernel.org/r/20200512150019.25903-6-alcooperx@gmail.com
Signed-off-by: Greg Kroah-Hartman

usb: remove ehci-w90x900 driver

2019-08-10T07:28:28+00:00

The ARM w90x900 platform is getting removed, so this driver is obsolete.

Signed-off-by: Arnd Bergmann 
Link: https://lore.kernel.org/r/20190809202749.742267-16-arnd@arndb.de
Signed-off-by: Greg Kroah-Hartman

USB: Move wusbcore and UWB to staging as it is obsolete

2019-08-08T05:52:01+00:00

The UWB and wusbcore code is long obsolete, so let us just move the code
out of the real part of the kernel and into the drivers/staging/
location with plans to remove it entirely in a few releases.

Link: https://lore.kernel.org/r/20190806101509.GA11280@kroah.com
Signed-off-by: Greg Kroah-Hartman

USB: EHCI: make ehci-mv a separate driver

2018-09-20T11:07:55+00:00

This is done do that it could be enabled alongside other platform EHCI
glue drivers on multiplatform kernels.

Signed-off-by: Lubomir Rintel 
Acked-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman

USB host: Add USB ehci support for nuvoton npcm7xx platform

2018-06-25T13:59:15+00:00

This patch adds support for ehci controller for the Nuvoton
npcm7xx platform.
Most of the code was taken from ehci-spear.c + specific initialization
code

Signed-off-by: Avi Fishman 
Acked-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman