linux-toradex.git/drivers/usb/host/ehci-octeon.c, branch v3.0.64 Linux kernel for Apalis and Colibri modules USB: EHCI: Support controllers with big endian capability regs 2011-05-03T18:43:21+00:00 Jan Andersson jan@gaisler.com 2011-05-03T18:11:57+00:00 c430131a02d677aa708f56342c1565edfdacb3c0 The two first HC capability registers (CAPLENGTH and HCIVERSION) are defined as one 8-bit and one 16-bit register. Most HC implementations have selected to treat these registers as part of a 32-bit register, giving the same layout for both big and small endian systems. This patch adds a new quirk, big_endian_capbase, to support controllers with big endian register interfaces that treat HCIVERSION and CAPLENGTH as individual registers. Signed-off-by: Jan Andersson <jan@gaisler.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
The two first HC capability registers (CAPLENGTH and HCIVERSION)
are defined as one 8-bit and one 16-bit register. Most HC
implementations have selected to treat these registers as part
of a 32-bit register, giving the same layout for both big and
small endian systems.

This patch adds a new quirk, big_endian_capbase, to support
controllers with big endian register interfaces that treat
HCIVERSION and CAPLENGTH as individual registers.

Signed-off-by: Jan Andersson <jan@gaisler.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
USB: Add EHCI and OHCH glue for OCTEON II SOCs. 2010-10-29T18:08:44+00:00 David Daney ddaney@caviumnetworks.com 2010-10-08T21:47:52+00:00 1643accdaad4625c2877f7ceefa39c1cb3e90117 The OCTEON II SOC has USB EHCI and OHCI controllers connected directly to the internal I/O bus. This patch adds the necessary 'glue' logic to allow ehci-hcd and ohci-hcd drivers to work on OCTEON II. The OCTEON normally runs big-endian, and the ehci/ohci internal registers have host endianness, so we need to select USB_EHCI_BIG_ENDIAN_MMIO. The ehci and ohci blocks share a common clocking and PHY infrastructure. Initialization of the host controller and PHY clocks is common between the two and is factored out into the octeon2-common.c file. Setting of USB_ARCH_HAS_OHCI and USB_ARCH_HAS_EHCI is done in arch/mips/Kconfig in a following patch. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-usb@vger.kernel.org To: dbrownell@users.sourceforge.net Patchwork: http://patchwork.linux-mips.org/patch/1675/ Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 
The OCTEON II SOC has USB EHCI and OHCI controllers connected directly
to the internal I/O bus.  This patch adds the necessary 'glue' logic
to allow ehci-hcd and ohci-hcd drivers to work on OCTEON II.

The OCTEON normally runs big-endian, and the ehci/ohci internal
registers have host endianness, so we need to select
USB_EHCI_BIG_ENDIAN_MMIO.

The ehci and ohci blocks share a common clocking and PHY
infrastructure.  Initialization of the host controller and PHY clocks
is common between the two and is factored out into the
octeon2-common.c file.

Setting of USB_ARCH_HAS_OHCI and USB_ARCH_HAS_EHCI is done in
arch/mips/Kconfig in a following patch.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-usb@vger.kernel.org
To: dbrownell@users.sourceforge.net
Patchwork: http://patchwork.linux-mips.org/patch/1675/
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>