linux-toradex.git/drivers/usb/host/r8a66597.h, branch v2.6.35.8

usb: r8a66597-hcd pio to mmio accessor conversion.

2010-06-02T07:31:15+00:00

r8a66597-hcd is erroneously using PIO routines on MMIO registers, which
presently blows up for any platform that elects to either override or do
away with PIO routines. This managed to work for the common cases since
the PIO routines were simply wrapped to their MMIO counterparts. This
switches over to using the MMIO routines directly, and enables us to kill
off a lot of superfluous casting in the process.

Acked-by: Yoshihiro Shimoda 
Signed-off-by: Paul Mundt

usb: move r8a66597 register defines

2009-07-23T04:04:10+00:00

Move r8a66597 hardware register definitions from the host
controller header file to the platform data header file.

With this change in place we can easily share register
definitions between the host controller driver and a future
gadget driver.

Signed-off-by: Magnus Damm 
Signed-off-by: Paul Mundt

usb: r8a66597-hcd platform data on_chip support

2009-07-19T19:27:10+00:00

Convert the r8a66597-hcd driver to use the on_chip flag
from platform data to enable on chip behaviour instead
of relying on CONFIG_SUPERH_ON_CHIP_R8A66597 ugliness.

This makes the code cleaner and also allows us to support
both external and internal r8a66597 with the same kernel.

It also makes the Kconfig part more future proof since
we with this patch can add support for new processors
with on-chip r8a66597 without modifying the Kconfig.

Signed-off-by: Magnus Damm 
Signed-off-by: Paul Mundt

USB: r8a66597-hcd: use platform_data instead of module_param

2009-06-16T04:44:46+00:00

CPU/board specific parameters (PLL clock, vif etc...) can be set
by platform_data instead of module_param.

v2: remove irq_sense member in platform_data because it can OR in
    IRQF_TRIGGER_LOW or IRQF_TRIGGER_FALLING against IORESOURCE_IRQ in
    the struct resource.

Signed-off-by: Yoshihiro Shimoda 
Reviewed-by: Paul Mundt 
Signed-off-by: Greg Kroah-Hartman

USB: r8a66597-hcd: suspend/resume support

2009-03-24T23:20:45+00:00

Fix the problem that system cannot suspend.

Signed-off-by: Yoshihiro Shimoda 
Signed-off-by: Greg Kroah-Hartman

sh: sh_mobile usb clock framework support

2008-12-22T09:42:51+00:00

Add clock framework support to the usb/r8a66597 driver and
adjust the cpu specific code accordingly.

Signed-off-by: Magnus Damm 
Signed-off-by: Paul Mundt

USB: r8a66597-hcd: Add support for SH7366 USB host

2008-04-25T04:16:49+00:00

R8A66597 is similar to SH7366 USB 2.0 Host/Function module. It can
support SH7366 USB host by changing several R8A66597 code.

Signed-off-by: Yoshihiro Shimoda 
Signed-off-by: Greg Kroah-Hartman

USB: r8a66597-hcd: fix usb device connection timing

2008-04-25T04:16:49+00:00

Fix the problem that enumeration of a USB device was slow.

Signed-off-by: Yoshihiro Shimoda 
Signed-off-by: Greg Kroah-Hartman

USB: r8a66597-hcd: fix interrupt transfer interval

2008-04-25T04:16:49+00:00

This driver ignored the value of bInterval and revised the problem
that performed interrupt transfer.

ASIX USB Ethernet adapter comes to work with this host controller
by applying this patch.

Signed-off-by: Yoshihiro Shimoda 
Signed-off-by: Greg Kroah-Hartman

USB: Spelling fixes

2008-02-01T22:34:57+00:00

Signed-off-by: Joe Perches 
Signed-off-by: Greg Kroah-Hartman