linux-toradex.git/drivers/usb/host/uhci-hcd.c, branch v3.2.67

USB: UHCI: fix IRQ race during initialization

2013-02-06T04:33:41+00:00

commit 0f815a0a700bc10547449bde6c106051a035a1b9 upstream.

This patch (as1644) fixes a race that occurs during startup in
uhci-hcd.  If the IRQ line is shared with other devices, it's possible
for the handler routine to be called before the data structures are
fully initialized.

The problem is fixed by adding a check to the IRQ handler routine.  If
the initialization hasn't finished yet, the routine will return
immediately.

Signed-off-by: Alan Stern 
Reported-by: Don Zickus 
Tested-by: "Huang, Adrian (ISS Linux TW)" 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings

USB: UHCI: improve comments and logic for root-hub suspend

2011-09-26T22:58:18+00:00

This patch (as1488) improves the comments and logic in uhci-hcd's
suspend routine.  The existing comments are hard to understand and
don't give a good idea of what's really going on.

The question of whether EGSM (Enter Global Suspend Mode) and RD
(enable Resume Detect interrupts) can be useful when they're not both
set is difficult.  The spec doesn't give any details on how they
interact with system wakeup, although clearly they are meant to be
used together.  To be safe, the patch changes the subroutine so that
neither bit gets set unless they both do.  There shouldn't be any
functional changes from this; only systems that are designed badly or
broken in some way need to avoid using those bits.

Signed-off-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman

Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

2011-05-23T19:33:02+00:00

* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (205 commits)
  USB: EHCI: Remove SPARC_LEON {read,write}_be definitions from ehci.h
  USB: UHCI: Support big endian GRUSBHC HC
  sparc: add {read,write}*_be routines
  USB: UHCI: Add support for big endian descriptors
  USB: UHCI: Use ACCESS_ONCE rather than using a full compiler barrier
  USB: UHCI: Add support for big endian mmio
  usb-storage: Correct adjust_quirks to include latest flags
  usb/isp1760: Fix possible unlink problems
  usb/isp1760: Move function isp1760_endpoint_disable() within file.
  USB: remove remaining usages of hcd->state from usbcore and fix regression
  usb: musb: ux500: add configuration and build options for ux500 dma
  usb: musb: ux500: add dma glue layer for ux500
  usb: musb: ux500: add dma name for ux500
  usb: musb: ux500: add ux500 specific code for gadget side
  usb: musb: fix compile error
  usb-storage: fix up the unusual_realtek device list
  USB: gadget: f_audio: Fix invalid dereference of initdata
  EHCI: don't rescan interrupt QHs needlessly
  OHCI: fix regression caused by nVidia shutdown workaround
  USB: OTG: msm: Free VCCCX regulator even if we can't set the voltage
  ...

USB: UHCI: Add support for big endian descriptors

2011-05-19T23:43:20+00:00

This patch adds support for universal host controllers that use
big endian descriptors. Support for BE descriptors requires a non-PCI
host controller. For kernels with PCI-only UHCI there should be no
change in behaviour.

This patch tries to replicate the technique used to support BE descriptors
in the EHCI HCD. Parts added to uhci-hcd.h are basically copy'n'paste from
ehci.h.

Signed-off-by: Jan Andersson 
Acked-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman

USB: UHCI: Add support for GRLIB GRUSBHC controller

2011-05-07T01:24:02+00:00

This patch adds support for the UHCI part of the GRLIB GRUSBHC controller
found on some LEON/GRLIB SoCs.

The UHCI HCD previously only supported controllers connected over PCI.
This patch adds support for the first non-PCI UHCI HC. I have tried to
replicate the solution used in ehci-hcd.c.

Tested on GR-LEON4-ITX board (LEON4/GRLIB with GRUSBHC) and x86 with Intel
UHCI HC.

Signed-off-by: Jan Andersson 
Acked-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman

USB: UHCI: Support non-PCI host controllers

2011-05-07T01:24:01+00:00

This patch is part of a series that extend the UHCI HCD to support
non-PCI host controllers.

This patch also extends the uhci_{read,write}* functions to allow accesses
to registers not mapped into PCI I/O space. This extension also includes
the addition of a void __iomem pointer to the uhci structure.

A new Kconfig option is added to signal that the system has a non-PCI HC.
If this Kconfig option is set, uhci-hcd.c will include generic reset functions
for systems that do not make use of keyboard and mouse legacy support. PCI
controllers will still always use the reset functions from pci-quirks

This patch is followed by a patch that adds bus glue for the first non-PCI
UHCI HC.

Signed-off-by: Jan Andersson 
Acked-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman

USB: UHCI: Wrap I/O register accesses

2011-05-07T01:24:01+00:00

This patch is part of a series that extend the UHCI HCD to support
non-PCI controllers.

This patch replaces in{b,w,l} and out{b,wl} with calls to local inline
functions. This is done so that the register access functions can be
extended to support register areas not mapped in PCI I/O space.

Signed-off-by: Jan Andersson 
Acked-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman

USB: UHCI: Move PCI specific functions to uhci-pci.c

2011-05-07T01:24:00+00:00

This patch is part of a series that extend the UHCI HCD to support
non-PCI controllers.

This patch moves PCI specific functions to uhci-pci.c and includes
this file in uhci-hcd.c. It also renames the function uhci_init to
uhci_pci_init.

uhci_init/uhci_pci_init is modified so that the port-detection logic
is kept in a new separate function uhci_count_ports() in uhci-hcd.c.

Signed-off-by: Jan Andersson 
Acked-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman

USB: UHCI: Codingstyle fixes

2011-05-07T01:24:00+00:00

This patch is part of a series that extend the UHCI HCD to support
non-PCI host controllers.

This patch fixes the following warnings from checkpatch:

ERROR: switch and case should be at the same indent
+   switch (to_pci_dev(uhci_dev(uhci))->vendor) {
+       default:
[...]
+       case PCI_VENDOR_ID_GENESYS:
[...]
+       case PCI_VENDOR_ID_INTEL:

WARNING: static char array declaration should probably be static const char
+   static char bad_Asus_board[] = "A7V8X";

WARNING: Use DEFINE_PCI_DEVICE_TABLE for struct pci_device_id
+static const struct pci_device_id uhci_pci_ids[] = { {

Signed-off-by: Jan Andersson 
Acked-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman

USB: UHCI: Allow dynamic assignment of bus specific functions

2011-05-07T01:23:59+00:00

This patch is part of a series that extend the UHCI HCD to support
non-PCI controllers.

This patch changes calls to uhci_reset_hc, uhci_check_and_reset_hc,
configure_hc, resume_detect_interrupts_are_broken and
global_suspend_mode_is_broken so that they are made through pointers
in the uhci hcd struct. This will allow these functions to be replaced
with bus/arch specific functions.

Signed-off-by: Jan Andersson 
Acked-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman