linux-toradex.git/drivers/usb/host/xhci.c, branch v3.0.64 Linux kernel for Apalis and Colibri modules xHCI: cancel command after command timeout 2012-10-28T17:02:14+00:00 Elric Fu elricfu1@gmail.com 2012-06-27T08:31:52+00:00 4b360f4937e646f777a3049c65124056c84c6977 commit 6e4468b9a0793dfb53eb80d9fe52c739b13b27fd upstream. The patch is used to cancel command when the command isn't acknowledged and a timeout occurs. This patch should be backported to kernels as old as 3.0, that contain the commit 7ed603ecf8b68ab81f4c83097d3063d43ec73bb8 "xhci: Add an assertion to check for virt_dev=0 bug." That commit papers over a NULL pointer dereference, and this patch fixes the underlying issue that caused the NULL pointer dereference. Signed-off-by: Elric Fu <elricfu1@gmail.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Miroslav Sabljic <miroslav.sabljic@avl.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 6e4468b9a0793dfb53eb80d9fe52c739b13b27fd upstream.

The patch is used to cancel command when the command isn't
acknowledged and a timeout occurs.

This patch should be backported to kernels as old as 3.0, that contain
the commit 7ed603ecf8b68ab81f4c83097d3063d43ec73bb8 "xhci: Add an
assertion to check for virt_dev=0 bug." That commit papers over a NULL
pointer dereference, and this patch fixes the underlying issue that
caused the NULL pointer dereference.

Signed-off-by: Elric Fu <elricfu1@gmail.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Tested-by: Miroslav Sabljic <miroslav.sabljic@avl.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xHCI: add aborting command ring function 2012-10-28T17:02:14+00:00 Elric Fu elricfu1@gmail.com 2012-06-27T08:31:12+00:00 bc47204b268516ae4085ebdc81a34ddda71b77c4 commit b92cc66c047ff7cf587b318fe377061a353c120f upstream. Software have to abort command ring and cancel command when a command is failed or hang. Otherwise, the command ring will hang up and can't handle the others. An example of a command that may hang is the Address Device Command, because waiting for a SET_ADDRESS request to be acknowledged by a USB device is outside of the xHC's ability to control. To cancel a command, software will initialize a command descriptor for the cancel command, and add it into a cancel_cmd_list of xhci. Sarah: Fixed missing newline on "Have the command ring been stopped?" debugging statement. This patch should be backported to kernels as old as 3.0, that contain the commit 7ed603ecf8b68ab81f4c83097d3063d43ec73bb8 "xhci: Add an assertion to check for virt_dev=0 bug." That commit papers over a NULL pointer dereference, and this patch fixes the underlying issue that caused the NULL pointer dereference. Signed-off-by: Elric Fu <elricfu1@gmail.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Miroslav Sabljic <miroslav.sabljic@avl.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b92cc66c047ff7cf587b318fe377061a353c120f upstream.

Software have to abort command ring and cancel command
when a command is failed or hang. Otherwise, the command
ring will hang up and can't handle the others. An example
of a command that may hang is the Address Device Command,
because waiting for a SET_ADDRESS request to be acknowledged
by a USB device is outside of the xHC's ability to control.

To cancel a command, software will initialize a command
descriptor for the cancel command, and add it into a
cancel_cmd_list of xhci.

Sarah: Fixed missing newline on "Have the command ring been stopped?"
debugging statement.

This patch should be backported to kernels as old as 3.0, that contain
the commit 7ed603ecf8b68ab81f4c83097d3063d43ec73bb8 "xhci: Add an
assertion to check for virt_dev=0 bug." That commit papers over a NULL
pointer dereference, and this patch fixes the underlying issue that
caused the NULL pointer dereference.

Signed-off-by: Elric Fu <elricfu1@gmail.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Tested-by: Miroslav Sabljic <miroslav.sabljic@avl.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xHCI: add cmd_ring_state 2012-10-28T17:02:13+00:00 Elric Fu elricfu1@gmail.com 2012-06-27T08:30:57+00:00 c76e4de05c23fea3d6ad6df63876a9397dd7c85a commit c181bc5b5d5c79b71203cd10cef97f802fb6f9c1 upstream. Adding cmd_ring_state for command ring. It helps to verify the current command ring state for controlling the command ring operations. This patch should be backported to kernels as old as 3.0. The commit 7ed603ecf8b68ab81f4c83097d3063d43ec73bb8 "xhci: Add an assertion to check for virt_dev=0 bug." papers over the NULL pointer dereference that I now believe is related to a timed out Set Address command. This (and the four patches that follow it) contain the real fix that also allows VIA USB 3.0 hubs to consistently re-enumerate during the plug/unplug stress tests. Signed-off-by: Elric Fu <elricfu1@gmail.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Miroslav Sabljic <miroslav.sabljic@avl.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c181bc5b5d5c79b71203cd10cef97f802fb6f9c1 upstream.

Adding cmd_ring_state for command ring. It helps to verify
the current command ring state for controlling the command
ring operations.

This patch should be backported to kernels as old as 3.0.  The commit
7ed603ecf8b68ab81f4c83097d3063d43ec73bb8 "xhci: Add an assertion to
check for virt_dev=0 bug." papers over the NULL pointer dereference that
I now believe is related to a timed out Set Address command.  This (and
the four patches that follow it) contain the real fix that also allows
VIA USB 3.0 hubs to consistently re-enumerate during the plug/unplug
stress tests.

Signed-off-by: Elric Fu <elricfu1@gmail.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Tested-by: Miroslav Sabljic <miroslav.sabljic@avl.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Increase XHCI suspend timeout to 16ms 2012-10-07T15:27:26+00:00 Michael Spang spang@chromium.org 2012-09-14T17:05:49+00:00 a4e92d29a86daf9609c875eccb1357657f2ac93f commit a6e097dfdfd189b6929af6efa1d289af61858386 upstream. The Intel XHCI specification says that after clearing the run/stop bit the controller may take up to 16ms to halt. We've seen a device take 14ms, which with the current timeout of 10ms causes the kernel to abort the suspend. Increasing the timeout to the recommended value fixes the problem. This patch should be backported to kernels as old as 2.6.37, that contain the commit 5535b1d5f8885695c6ded783c692e3c0d0eda8ca "USB: xHCI: PCI power management implementation". Signed-off-by: Michael Spang <spang@chromium.org> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a6e097dfdfd189b6929af6efa1d289af61858386 upstream.

The Intel XHCI specification says that after clearing the run/stop bit
the controller may take up to 16ms to halt. We've seen a device take
14ms, which with the current timeout of 10ms causes the kernel to
abort the suspend. Increasing the timeout to the recommended value
fixes the problem.

This patch should be backported to kernels as old as 2.6.37, that
contain the commit 5535b1d5f8885695c6ded783c692e3c0d0eda8ca "USB: xHCI:
PCI power management implementation".

Signed-off-by: Michael Spang <spang@chromium.org>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci: Fix a logical vs bitwise AND bug 2012-10-02T16:47:39+00:00 Dan Carpenter dan.carpenter@oracle.com 2012-08-13T16:57:03+00:00 c0a168c0f20189efc03264785edd55baf00d5acc commit 052c7f9ffb0e95843e75448d02664459253f9ff8 upstream. The intent was to test whether the flag was set. This patch should be backported to stable kernels as old as 3.0, since it fixes a bug in commit e95829f474f0db3a4d940cae1423783edd966027 "xhci: Switch PPT ports to EHCI on shutdown.", which was marked for stable. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 052c7f9ffb0e95843e75448d02664459253f9ff8 upstream.

The intent was to test whether the flag was set.

This patch should be backported to stable kernels as old as 3.0, since
it fixes a bug in commit e95829f474f0db3a4d940cae1423783edd966027 "xhci:
Switch PPT ports to EHCI on shutdown.", which was marked for stable.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci: Switch PPT ports to EHCI on shutdown. 2012-08-26T22:12:12+00:00 Sarah Sharp sarah.a.sharp@linux.intel.com 2012-07-23T15:59:30+00:00 0135372d5c4305a59aee0091847da7ce0cf08ffe commit e95829f474f0db3a4d940cae1423783edd966027 upstream. The Intel desktop boards DH77EB and DH77DF have a hardware issue that can be worked around by BIOS. If the USB ports are switched to xHCI on shutdown, the xHCI host will send a spurious interrupt, which will wake the system. Some BIOS will work around this, but not all. The bug can be avoided if the USB ports are switched back to EHCI on shutdown. The Intel Windows driver switches the ports back to EHCI, so change the Linux xHCI driver to do the same. Unfortunately, we can't tell the two effected boards apart from other working motherboards, because the vendors will change the DMI strings for the DH77EB and DH77DF boards to their own custom names. One example is Compulab's mini-desktop, the Intense-PC. Instead, key off the Panther Point xHCI host PCI vendor and device ID, and switch the ports over for all PPT xHCI hosts. The only impact this will have on non-effected boards is to add a couple hundred milliseconds delay on boot when the BIOS has to switch the ports over from EHCI to xHCI. This patch should be backported to kernels as old as 3.0, that contain the commit 69e848c2090aebba5698a1620604c7dccb448684 "Intel xhci: Support EHCI/xHCI port switching." Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Reported-by: Denis Turischev <denis@compulab.co.il> Tested-by: Denis Turischev <denis@compulab.co.il> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e95829f474f0db3a4d940cae1423783edd966027 upstream.

The Intel desktop boards DH77EB and DH77DF have a hardware issue that
can be worked around by BIOS.  If the USB ports are switched to xHCI on
shutdown, the xHCI host will send a spurious interrupt, which will wake
the system.  Some BIOS will work around this, but not all.

The bug can be avoided if the USB ports are switched back to EHCI on
shutdown.  The Intel Windows driver switches the ports back to EHCI, so
change the Linux xHCI driver to do the same.

Unfortunately, we can't tell the two effected boards apart from other
working motherboards, because the vendors will change the DMI strings
for the DH77EB and DH77DF boards to their own custom names.  One example
is Compulab's mini-desktop, the Intense-PC.  Instead, key off the
Panther Point xHCI host PCI vendor and device ID, and switch the ports
over for all PPT xHCI hosts.

The only impact this will have on non-effected boards is to add a couple
hundred milliseconds delay on boot when the BIOS has to switch the ports
over from EHCI to xHCI.

This patch should be backported to kernels as old as 3.0, that contain
the commit 69e848c2090aebba5698a1620604c7dccb448684 "Intel xhci: Support
EHCI/xHCI port switching."

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Reported-by: Denis Turischev <denis@compulab.co.il>
Tested-by: Denis Turischev <denis@compulab.co.il>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci: Increase reset timeout for Renesas 720201 host. 2012-08-26T22:12:12+00:00 Sarah Sharp sarah.a.sharp@linux.intel.com 2012-07-23T23:06:08+00:00 b474a496850d10267320b7c2ff7c0ca09d2de8c9 commit 22ceac191211cf6688b1bf6ecd93c8b6bf80ed9b upstream. The NEC/Renesas 720201 xHCI host controller does not complete its reset within 250 milliseconds. In fact, it takes about 9 seconds to reset the host controller, and 1 second for the host to be ready for doorbell rings. Extend the reset and CNR polling timeout to 10 seconds each. This patch should be backported to kernels as old as 2.6.31, that contain the commit 66d4eadd8d067269ea8fead1a50fe87c2979a80d "USB: xhci: BIOS handoff and HW initialization." Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Reported-by: Edwin Klein Mentink <e.kleinmentink@zonnet.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 22ceac191211cf6688b1bf6ecd93c8b6bf80ed9b upstream.

The NEC/Renesas 720201 xHCI host controller does not complete its reset
within 250 milliseconds.  In fact, it takes about 9 seconds to reset the
host controller, and 1 second for the host to be ready for doorbell
rings.  Extend the reset and CNR polling timeout to 10 seconds each.

This patch should be backported to kernels as old as 2.6.31, that
contain the commit 66d4eadd8d067269ea8fead1a50fe87c2979a80d "USB: xhci:
BIOS handoff and HW initialization."

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Reported-by: Edwin Klein Mentink <e.kleinmentink@zonnet.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xHCI: Increase the timeout for controller save/restore state operation 2012-06-22T18:34:14+00:00 Andiry Xu andiry.xu@gmail.com 2012-06-13T02:51:57+00:00 482a7756a282b7873dcba9441504a32354317d49 commit 622eb783fe6ff4c1baa47db16c3a5db97f9e6e50 upstream. When system software decides to power down the xHC with the intent of resuming operation at a later time, it will ask xHC to save the internal state and restore it when resume to correctly recover from a power event. Two bits are used to enable this operation: Save State and Restore State. xHCI spec 4.23.2 says software should "Set the Controller Save/Restore State flag in the USBCMD register and wait for the Save/Restore State Status flag in the USBSTS register to transition to '0'". However, it does not define how long software should wait for the SSS/RSS bit to transition to 0. Currently the timeout is set to 1ms. There is bug report (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1002697) indicates that the timeout is too short for ASMedia ASM1042 host controller to save/restore the state successfully. Increase the timeout to 10ms helps to resolve the issue. This patch should be backported to stable kernels as old as 2.6.37, that contain the commit 5535b1d5f8885695c6ded783c692e3c0d0eda8ca "USB: xHCI: PCI power management implementation" Signed-off-by: Andiry Xu <andiry.xu@gmail.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 622eb783fe6ff4c1baa47db16c3a5db97f9e6e50 upstream.

When system software decides to power down the xHC with the intent of
resuming operation at a later time, it will ask xHC to save the internal
state and restore it when resume to correctly recover from a power event.
Two bits are used to enable this operation: Save State and Restore State.

xHCI spec 4.23.2 says software should "Set the Controller Save/Restore
State flag in the USBCMD register and wait for the Save/Restore State
Status flag in the USBSTS register to transition to '0'". However, it does
not define how long software should wait for the SSS/RSS bit to transition
to 0.

Currently the timeout is set to 1ms. There is bug report
(https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1002697)
indicates that the timeout is too short for ASMedia ASM1042 host controller
to save/restore the state successfully. Increase the timeout to 10ms helps to
resolve the issue.

This patch should be backported to stable kernels as old as 2.6.37, that
contain the commit 5535b1d5f8885695c6ded783c692e3c0d0eda8ca "USB: xHCI:
PCI power management implementation"

Signed-off-by: Andiry Xu <andiry.xu@gmail.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci: Fix register save/restore order. 2012-04-22T23:21:42+00:00 Sarah Sharp sarah.a.sharp@linux.intel.com 2012-03-16T20:19:35+00:00 4f4227f37036c13f42dac881b8bed4ca5e8e414f commit c7713e736526d8c9f6f87716fb90562a8ffaff2c upstream. The xHCI 1.0 spec errata released on June 13, 2011, changes the ordering that the xHCI registers are saved and restored in. It moves the interrupt pending (IMAN) and interrupt control (IMOD) registers to be saved and restored last. I believe that's because the host controller may attempt to fetch the event ring table when interrupts are re-enabled. Therefore we need to restore the event ring registers before we re-enable interrupts. This should be backported to kernels as old as 2.6.37, that contain the commit 5535b1d5f8885695c6ded783c692e3c0d0eda8ca "USB: xHCI: PCI power management implementation" Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Elric Fu <elricfu1@gmail.com> Cc: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c7713e736526d8c9f6f87716fb90562a8ffaff2c upstream.

The xHCI 1.0 spec errata released on June 13, 2011, changes the ordering
that the xHCI registers are saved and restored in.  It moves the
interrupt pending (IMAN) and interrupt control (IMOD) registers to be
saved and restored last.  I believe that's because the host controller
may attempt to fetch the event ring table when interrupts are
re-enabled.  Therefore we need to restore the event ring registers
before we re-enable interrupts.

This should be backported to kernels as old as 2.6.37, that contain the
commit 5535b1d5f8885695c6ded783c692e3c0d0eda8ca "USB: xHCI: PCI power
management implementation"

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Tested-by: Elric Fu <elricfu1@gmail.com>
Cc: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci: Restore event ring dequeue pointer on resume. 2012-04-22T23:21:41+00:00 Sarah Sharp sarah.a.sharp@linux.intel.com 2012-03-16T20:27:39+00:00 12faabb18deebe28d463ee150c0cefafbac482ae commit fb3d85bc7193f23c9a564502df95564c49a32c91 upstream. The xhci_save_registers() function saved the event ring dequeue pointer in the s3 register structure, but xhci_restore_registers() never restored it. No other code in the xHCI successful resume path would ever restore it either. Fix that. This should be backported to kernels as old as 2.6.37, that contain the commit 5535b1d5f8885695c6ded783c692e3c0d0eda8ca "USB: xHCI: PCI power management implementation". Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Elric Fu <elricfu1@gmail.com> Cc: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit fb3d85bc7193f23c9a564502df95564c49a32c91 upstream.

The xhci_save_registers() function saved the event ring dequeue pointer
in the s3 register structure, but xhci_restore_registers() never
restored it.  No other code in the xHCI successful resume path would
ever restore it either.  Fix that.

This should be backported to kernels as old as 2.6.37, that contain the
commit 5535b1d5f8885695c6ded783c692e3c0d0eda8ca "USB: xHCI: PCI power
management implementation".

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Tested-by: Elric Fu <elricfu1@gmail.com>
Cc: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>