linux-toradex.git/drivers/usb/host, branch v3.4.43 Linux kernel for Apalis and Colibri modules usb: xhci: Fix TRB transfer length macro used for Event TRB. 2013-04-05T17:04:34+00:00 Vivek Gautam gautam.vivek@samsung.com 2013-03-21T06:36:48+00:00 e18e8665134f6adb079861d3676e7d838ce658ca commit 1c11a172cb30492f5f6a82c6e118fdcd9946c34f upstream. Use proper macro while extracting TRB transfer length from Transfer event TRBs. Adding a macro EVENT_TRB_LEN (bits 0:23) for the same, and use it instead of TRB_LEN (bits 0:16) in case of event TRBs. This patch should be backported to kernels as old as 2.6.31, that contain the commit b10de142119a676552df3f0d2e3a9d647036c26a "USB: xhci: Bulk transfer support". This patch will have issues applying to older kernels. Signed-off-by: Vivek gautam <gautam.vivek@samsung.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 1c11a172cb30492f5f6a82c6e118fdcd9946c34f upstream.

Use proper macro while extracting TRB transfer length from
Transfer event TRBs. Adding a macro EVENT_TRB_LEN (bits 0:23)
for the same, and use it instead of TRB_LEN (bits 0:16) in
case of event TRBs.

This patch should be backported to kernels as old as 2.6.31, that
contain the commit b10de142119a676552df3f0d2e3a9d647036c26a "USB: xhci:
Bulk transfer support".  This patch will have issues applying to older
kernels.

Signed-off-by: Vivek gautam <gautam.vivek@samsung.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: xhci: correctly enable interrupts 2013-03-28T19:12:26+00:00 Hannes Reinecke hare@suse.de 2013-03-04T16:14:43+00:00 d581bb3819c5cda33531a0a67c02dbdb7d61f307 commit 00eed9c814cb8f281be6f0f5d8f45025dc0a97eb upstream. xhci has its own interrupt enabling routine, which will try to use MSI-X/MSI if present. So the usb core shouldn't try to enable legacy interrupts; on some machines the xhci legacy IRQ setting is invalid. v3: Be careful to not break XHCI_BROKEN_MSI workaround (by trenn) Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Oliver Neukum <oneukum@suse.de> Cc: Thomas Renninger <trenn@suse.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Frederik Himpe <fhimpe@vub.ac.be> Cc: David Haerdeman <david@hardeman.nu> Cc: Alan Stern <stern@rowland.harvard.edu> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Reviewed-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 00eed9c814cb8f281be6f0f5d8f45025dc0a97eb upstream.

xhci has its own interrupt enabling routine, which will try to
use MSI-X/MSI if present. So the usb core shouldn't try to enable
legacy interrupts; on some machines the xhci legacy IRQ setting
is invalid.

v3: Be careful to not break XHCI_BROKEN_MSI workaround (by trenn)

Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Oliver Neukum <oneukum@suse.de>
Cc: Thomas Renninger <trenn@suse.de>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Frederik Himpe <fhimpe@vub.ac.be>
Cc: David Haerdeman <david@hardeman.nu>
Cc: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Reviewed-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: xhci - fix bit definitions for IMAN register 2013-03-28T19:12:26+00:00 Dmitry Torokhov dtor@vmware.com 2013-02-25T18:56:01+00:00 31e8d29ccf1844a84b7c07d511e6a92d9f99cc11 commit f8264340e694604863255cc0276491d17c402390 upstream. According to XHCI specification (5.5.2.1) the IP is bit 0 and IE is bit 1 of IMAN register. Previously their definitions were reversed. Even though there are no ill effects being observed from the swapped definitions (because IMAN_IP is RW1C and in legacy PCI case we come in with it already set to 1 so it was clearing itself even though we were setting IMAN_IE instead of IMAN_IP), we should still correct the values. This patch should be backported to kernels as old as 2.6.36, that contain the commit 4e833c0b87a30798e67f06120cecebef6ee9644c "xhci: don't re-enable IE constantly". Signed-off-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f8264340e694604863255cc0276491d17c402390 upstream.

According to XHCI specification (5.5.2.1) the IP is bit 0 and IE is bit 1
of IMAN register. Previously their definitions were reversed.

Even though there are no ill effects being observed from the swapped
definitions (because IMAN_IP is RW1C and in legacy PCI case we come in
with it already set to 1 so it was clearing itself even though we were
setting IMAN_IE instead of IMAN_IP), we should still correct the values.

This patch should be backported to kernels as old as 2.6.36, that
contain the commit 4e833c0b87a30798e67f06120cecebef6ee9644c "xhci: don't
re-enable IE constantly".

Signed-off-by: Dmitry Torokhov <dtor@vmware.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert "USB: EHCI: don't check DMA values in QH overlays" 2013-03-28T19:11:52+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2013-03-20T21:16:12+00:00 3ff89240cd6922f9da638e2cc3012b5f8f01f943 This reverts commit 0319f9909ce68a7516dfc8d53400e07168d281a8, which is commit feca7746d5d9e84b105a613b7f3b6ad00d327372 upstream. It shouldn't have gone into this stable release. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Joseph Salisbury <joseph.salisbury@canonical.com> Cc: Stephen Thirlwall <sdt@dr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This reverts commit 0319f9909ce68a7516dfc8d53400e07168d281a8, which is commit
feca7746d5d9e84b105a613b7f3b6ad00d327372 upstream.

It shouldn't have gone into this stable release.

Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Joseph Salisbury <joseph.salisbury@canonical.com>
Cc: Stephen Thirlwall <sdt@dr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: EHCI: don't check DMA values in QH overlays 2013-03-20T20:04:58+00:00 Alan Stern stern@rowland.harvard.edu 2013-03-01T15:51:15+00:00 0319f9909ce68a7516dfc8d53400e07168d281a8 commit feca7746d5d9e84b105a613b7f3b6ad00d327372 upstream. This patch (as1661) fixes a rather obscure bug in ehci-hcd. In a couple of places, the driver compares the DMA address stored in a QH's overlay region with the address of a particular qTD, in order to see whether that qTD is the one currently being processed by the hardware. (If it is then the status in the QH's overlay region is more up-to-date than the status in the qTD, and if it isn't then the overlay's value needs to be adjusted when the QH is added back to the active schedule.) However, DMA address in the overlay region isn't always valid. It sometimes will contain a stale value, which may happen by coincidence to be equal to a qTD's DMA address. Instead of checking the DMA address, we should check whether the overlay region is active and valid. The patch tests the ACTIVE bit in the overlay, and clears this bit when the overlay becomes invalid (which happens when the currently-executing URB is unlinked). This is the second part of a fix for the regression reported at: https://bugs.launchpad.net/bugs/1088733 Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Joseph Salisbury <joseph.salisbury@canonical.com> Reported-and-tested-by: Stephen Thirlwall <sdt@dr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit feca7746d5d9e84b105a613b7f3b6ad00d327372 upstream.

This patch (as1661) fixes a rather obscure bug in ehci-hcd.  In a
couple of places, the driver compares the DMA address stored in a QH's
overlay region with the address of a particular qTD, in order to see
whether that qTD is the one currently being processed by the hardware.
(If it is then the status in the QH's overlay region is more
up-to-date than the status in the qTD, and if it isn't then the
overlay's value needs to be adjusted when the QH is added back to the
active schedule.)

However, DMA address in the overlay region isn't always valid.  It
sometimes will contain a stale value, which may happen by coincidence
to be equal to a qTD's DMA address.  Instead of checking the DMA
address, we should check whether the overlay region is active and
valid.  The patch tests the ACTIVE bit in the overlay, and clears this
bit when the overlay becomes invalid (which happens when the
currently-executing URB is unlinked).

This is the second part of a fix for the regression reported at:

	https://bugs.launchpad.net/bugs/1088733

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Joseph Salisbury <joseph.salisbury@canonical.com>
Reported-and-tested-by: Stephen Thirlwall <sdt@dr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: ehci-omap: Fix autoloading of module 2013-02-28T14:59:06+00:00 Roger Quadros rogerq@ti.com 2013-02-14T15:08:09+00:00 30361160bc12da86b9ce4c7c60bd68ff930eda76 commit 04753523266629b1cd0518091da1658755787198 upstream. The module alias should be "ehci-omap" and not "omap-ehci" to match the platform device name. The omap-ehci module should now autoload correctly. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 04753523266629b1cd0518091da1658755787198 upstream.

The module alias should be "ehci-omap" and not
"omap-ehci" to match the platform device name.
The omap-ehci module should now autoload correctly.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: Prevent dead ports when xhci is not enabled 2013-02-11T16:47:21+00:00 David Moore david.moore@gmail.com 2013-01-24T06:19:49+00:00 b4e8be42e038f1b931a44bc93050f8a261b495a1 commit 58b2939b4d5a030eaec469d29812ab8477ee7e76 upstream. When the xHCI driver is not available, actively switch the ports to EHCI mode since some BIOSes leave them in xHCI mode where they would otherwise appear dead. This was discovered on a Dell Optiplex 7010, but it's possible other systems could be affected. This should be backported to kernels as old as 3.0, that contain the commit 69e848c2090aebba5698a1620604c7dccb448684 "Intel xhci: Support EHCI/xHCI port switching." Signed-off-by: David Moore <david.moore@gmail.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 58b2939b4d5a030eaec469d29812ab8477ee7e76 upstream.

When the xHCI driver is not available, actively switch the ports to EHCI
mode since some BIOSes leave them in xHCI mode where they would
otherwise appear dead.  This was discovered on a  Dell Optiplex 7010,
but it's possible other systems could be affected.

This should be backported to kernels as old as 3.0, that contain the
commit 69e848c2090aebba5698a1620604c7dccb448684 "Intel xhci: Support
EHCI/xHCI port switching."

Signed-off-by: David Moore <david.moore@gmail.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: XHCI: fix memory leak of URB-private data 2013-02-11T16:47:20+00:00 Alan Stern stern@rowland.harvard.edu 2013-01-17T15:32:16+00:00 235b62026c1f73decda124912930e322dc8ec57d commit 48c3375c5f69b1c2ef3d1051a0009cb9bce0ce24 upstream. This patch (as1640) fixes a memory leak in xhci-hcd. The urb_priv data structure isn't always deallocated in the handle_tx_event() routine for non-control transfers. The patch adds a kfree() call so that all paths end up freeing the memory properly. This patch should be backported to kernels as old as 2.6.36, that contain the commit 8e51adccd4c4b9ffcd509d7f2afce0a906139f75 "USB: xHCI: Introduce urb_priv structure" Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Reported-and-tested-by: Martin Mokrejs <mmokrejs@fold.natur.cuni.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 48c3375c5f69b1c2ef3d1051a0009cb9bce0ce24 upstream.

This patch (as1640) fixes a memory leak in xhci-hcd.  The urb_priv
data structure isn't always deallocated in the handle_tx_event()
routine for non-control transfers.  The patch adds a kfree() call so
that all paths end up freeing the memory properly.

This patch should be backported to kernels as old as 2.6.36, that
contain the commit 8e51adccd4c4b9ffcd509d7f2afce0a906139f75 "USB: xHCI:
Introduce urb_priv structure"

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Reported-and-tested-by: Martin Mokrejs <mmokrejs@fold.natur.cuni.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci: Fix TD size for isochronous URBs. 2013-02-11T16:47:20+00:00 Sarah Sharp sarah.a.sharp@linux.intel.com 2013-01-11T21:36:35+00:00 d018dbbf6e7e3d588b09273c38ea57bc666d474c commit f18f8ed2a9adc41c2d9294b85b6af115829d2af1 upstream. To calculate the TD size for a particular TRB in an isoc TD, we need know the endpoint's max packet size. Isochronous endpoints also encode the number of additional service opportunities in their wMaxPacketSize field. The TD size calculation did not mask off those bits before using the field. This resulted in incorrect TD size information for isochronous TRBs when an URB frame buffer crossed a 64KB boundary. For example: - an isoc endpoint has 2 additional service opportunites and a max packet size of 1020 bytes - a frame transfer buffer contains 3060 bytes - one frame buffer crosses a 64KB boundary, and must be split into one 1276 byte TRB, and one 1784 byte TRB. The TD size is is the number of packets that remain to be transferred for a TD after processing all the max packet sized packets in the current TRB and all previous TRBs. For this TD, the number of packets to be transferred is (3060 / 1020), or 3. The first TRB contains 1276 bytes, which means it contains one full packet, and a 256 byte remainder. After processing all the max packet-sized packets in the first TRB, the host will have 2 packets left to transfer. The old code would calculate the TD size for the first TRB as: total packet count = DIV_ROUND_UP (TD length / endpoint wMaxPacketSize) total packet count - (first TRB length / endpoint wMaxPacketSize) The math should have been: total packet count = DIV_ROUND_UP (3060 / 1020) = 3 3 - (1276 / 1020) = 2 Since the old code didn't mask off the additional service interval bits from the wMaxPacketSize field, the math ended up as total packet count = DIV_ROUND_UP (3060 / 5116) = 1 1 - (1276 / 5116) = 1 Fix this by masking off the number of additional service opportunities in the wMaxPacketSize field. This patch should be backported to stable kernels as old as 3.0, that contain the commit 4da6e6f247a2601ab9f1e63424e4d944ed4124f3 "xhci 1.0: Update TD size field format." It may not apply well to kernels older than 3.2 because of commit 29cc88979a8818cd8c5019426e945aed118b400e "USB: use usb_endpoint_maxp() instead of le16_to_cpu()". Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f18f8ed2a9adc41c2d9294b85b6af115829d2af1 upstream.

To calculate the TD size for a particular TRB in an isoc TD, we need
know the endpoint's max packet size.  Isochronous endpoints also encode
the number of additional service opportunities in their wMaxPacketSize
field.  The TD size calculation did not mask off those bits before using
the field.  This resulted in incorrect TD size information for
isochronous TRBs when an URB frame buffer crossed a 64KB boundary.

For example:
 - an isoc endpoint has 2 additional service opportunites and
   a max packet size of 1020 bytes
 - a frame transfer buffer contains 3060 bytes
 - one frame buffer crosses a 64KB boundary, and must be split into
   one 1276 byte TRB, and one 1784 byte TRB.

The TD size is is the number of packets that remain to be transferred
for a TD after processing all the max packet sized packets in the
current TRB and all previous TRBs.

For this TD, the number of packets to be transferred is (3060 / 1020),
or 3.  The first TRB contains 1276 bytes, which means it contains one
full packet, and a 256 byte remainder.  After processing all the max
packet-sized packets in the first TRB, the host will have 2 packets left
to transfer.

The old code would calculate the TD size for the first TRB as:

total packet count = DIV_ROUND_UP (TD length / endpoint wMaxPacketSize)
total packet count - (first TRB length / endpoint wMaxPacketSize)

The math should have been:

total packet count = DIV_ROUND_UP (3060 / 1020) = 3
3 - (1276 / 1020) = 2

Since the old code didn't mask off the additional service interval bits
from the wMaxPacketSize field, the math ended up as

total packet count = DIV_ROUND_UP (3060 / 5116) = 1
1 - (1276 / 5116) = 1

Fix this by masking off the number of additional service opportunities
in the wMaxPacketSize field.

This patch should be backported to stable kernels as old as 3.0, that
contain the commit 4da6e6f247a2601ab9f1e63424e4d944ed4124f3 "xhci 1.0:
Update TD size field format."  It may not apply well to kernels older
than 3.2 because of commit 29cc88979a8818cd8c5019426e945aed118b400e
"USB: use usb_endpoint_maxp() instead of le16_to_cpu()".

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci: Fix isoc TD encoding. 2013-02-11T16:47:20+00:00 Sarah Sharp sarah.a.sharp@linux.intel.com 2013-01-11T19:19:07+00:00 1757e241ae2c9758bd983250b94328bddeff8760 commit 760973d2a74b93eb1697981f7448f0e62767cfc4 upstream. An isochronous TD is comprised of one isochronous TRB chained to zero or more normal TRBs. Only the isoc TRB has the TBC and TLBPC fields. The normal TRBs must set those fields to zeroes. The code was setting the TBC and TLBPC fields for both isoc and normal TRBs. Fix this. This should be backported to stable kernels as old as 3.0, that contain the commit b61d378f2da41c748aba6ca19d77e1e1c02bcea5 " xhci 1.0: Set transfer burst last packet count field." Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 760973d2a74b93eb1697981f7448f0e62767cfc4 upstream.

An isochronous TD is comprised of one isochronous TRB chained to zero or
more normal TRBs.  Only the isoc TRB has the TBC and TLBPC fields.  The
normal TRBs must set those fields to zeroes.  The code was setting the
TBC and TLBPC fields for both isoc and normal TRBs.  Fix this.

This should be backported to stable kernels as old as 3.0, that contain
the commit b61d378f2da41c748aba6ca19d77e1e1c02bcea5 " xhci 1.0: Set
transfer burst last packet count field."

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>