Pull USB and Thunderbolt driver updates from Greg KH:
 "Here is the large set of USB and Thunderbolt driver changes for
  6.2-rc1. Overall, thanks to the removal of a driver, more lines were
  removed than added, a nice change. Highlights include:

   - removal of the sisusbvga driver that was not used by anyone anymore

   - minor thunderbolt driver changes and tweaks

   - chipidea driver updates

   - usual set of typec driver features and hardware support added

   - musb minor driver fixes

   - fotg210 driver fixes, bringing that hardware back from the "dead"

   - minor dwc3 driver updates

   - addition, and then removal, of a list.h helper function for many
     USB and other subsystem drivers, that ended up breaking the build.
     That will come back for 6.3-rc1, it missed this merge window.

   - usual xhci updates and enhancements

   - usb-serial driver updates and support for new devices

   - other minor USB driver updates

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'usb-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (153 commits)
  usb: gadget: uvc: Rename bmInterfaceFlags -> bmInterlaceFlags
  usb: dwc2: power on/off phy for peripheral mode in dual-role mode
  usb: dwc2: disable lpm feature on Rockchip SoCs
  dt-bindings: usb: mtk-xhci: add support for mt7986
  usb: dwc3: core: defer probe on ulpi_read_id timeout
  usb: ulpi: defer ulpi_register on ulpi_read_id timeout
  usb: misc: onboard_usb_hub: add Genesys Logic GL850G hub support
  dt-bindings: usb: Add binding for Genesys Logic GL850G hub controller
  dt-bindings: vendor-prefixes: add Genesys Logic
  usb: fotg210-udc: fix potential memory leak in fotg210_udc_probe()
  usb: typec: tipd: Set mode of operation for USB Type-C connector
  usb: gadget: udc: drop obsolete dependencies on COMPILE_TEST
  usb: musb: remove extra check in musb_gadget_vbus_draw
  usb: gadget: uvc: Prevent buffer overflow in setup handler
  usb: dwc3: qcom: Fix memory leak in dwc3_qcom_interconnect_init
  usb: typec: wusb3801: fix fwnode refcount leak in wusb3801_probe()
  usb: storage: Add check for kcalloc
  USB: sisusbvga: use module_usb_driver()
  USB: sisusbvga: rename sisusb.c to sisusbvga.c
  USB: sisusbvga: remove console support
  ...

Pull ARM SoC driver updates from Arnd Bergmann:
 "There are few major updates in the SoC specific drivers, mainly the
  usual reworks and support for variants of the existing SoC. While this
  remains Arm centric for the most part, the branch now also contains
  updates to risc-v and loongarch specific code in drivers/soc/.

  Notable changes include:

   - Support for the newly added Qualcomm Snapdragon variants (MSM8956,
     MSM8976, SM6115, SM4250, SM8150, SA8155 and SM8550) in the soc ID,
     rpmh, rpm, spm and powerdomain drivers.

   - Documentation for the somewhat controversial qcom,board-id
     properties that are required for booting a number of machines

   - A new SoC identification driver for the loongson-2 (loongarch)
     platform

   - memory controller updates for stm32, tegra, and renesas.

   - a new DT binding to better describe LPDDR2/3/4/5 chips in the
     memory controller subsystem

   - Updates for Tegra specific drivers across multiple subsystems,
     improving support for newer SoCs and better identification

   - Minor fixes for Broadcom, Freescale, Apple, Renesas, Sifive, TI,
     Mediatek and Marvell SoC drivers"

* tag 'soc-drivers-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (137 commits)
  soc: qcom: socinfo: Add SM6115 / SM4250 SoC IDs to the soc_id table
  dt-bindings: arm: qcom,ids: Add SoC IDs for SM6115 / SM4250 and variants
  soc: qcom: socinfo: Add SM8150 and SA8155 SoC IDs to the soc_id table
  dt-bindings: arm: qcom,ids: Add SoC IDs for SM8150 and SA8155
  dt-bindings: soc: qcom: apr: document generic qcom,apr compatible
  soc: qcom: Select REMAP_MMIO for ICC_BWMON driver
  soc: qcom: Select REMAP_MMIO for LLCC driver
  soc: qcom: rpmpd: Add SM4250 support
  dt-bindings: power: rpmpd: Add SM4250 support
  dt-bindings: soc: qcom: aoss: Add compatible for SM8550
  soc: qcom: llcc: Add configuration data for SM8550
  dt-bindings: arm: msm: Add LLCC compatible for SM8550
  soc: qcom: llcc: Add v4.1 HW version support
  soc: qcom: socinfo: Add SM8550 ID
  soc: qcom: rpmh-rsc: Avoid unnecessary checks on irq-done response
  soc: qcom: rpmh-rsc: Add support for RSC v3 register offsets
  soc: qcom: rpmhpd: Add SM8550 power domains
  dt-bindings: power: rpmpd: Add SM8550 to rpmpd binding
  soc: qcom: socinfo: Add MSM8956/76 SoC IDs to the soc_id table
  dt-bindings: arm: qcom,ids: Add SoC IDs for MSM8956 and MSM8976
  ...

Commit 84582f9ed090 ("soc: fsl: qe: Avoid using gpio_to_desc()") changed
qe_pin_request() to request and hold GPIO corresponding to a given pin.
Unfortunately this does not work, as fhci-hcd requests these GPIOs
first, befor calling qe_pin_request() (see
drivers/usb/host/fhci-hcd.c::of_fhci_probe()).
To fix it change qe_pin_request() to request GPIOs non-exclusively, and
free them once the code determines GPIO controller and offset for each
GPIO/pin.

Also reaching deep into gpiolib implementation is not the best idea. We
should either export gpio_chip_hwgpio() or keep converting to the global
gpio numbers space until we fix the driver to implement proper pin
control.

Fixes: 84582f9ed090 ("soc: fsl: qe: Avoid using gpio_to_desc()")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/Y400YXnWBdz1e/L5@google.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The stream_id parameter is no longer used when handling halted endpoints.
Remove it

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20221130091944.2171610-7-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Make sure to also limit the amount of soft reset retries for transaction
errors on streams in cases where the transaction error event doesn't point
to any specific TRB.

In these cases we don't know the TRB or stream ring, but we do know which
endpoint had the error.

To keep error counting simple and functional, move the current err_count
from ring structure to endpoint structure.

Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20221130091944.2171610-6-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Disable U3 suspended ports in hibernate S4 poweroff_late for systems
with XHCI_RESET_TO_DEFAULT quirk, if wakeup is not enabled.

This reduces the number of self-powered usb devices from surviving in
U3 suspended state into next reboot.

Bootloader/firmware on these systems can't handle usb ports in U3, and
will timeout, causing extra delay during reboot/restore from S4.

Add pci_poweroff_late() callback to struct usb_hcd to get this done at
the correct stage in hibernate.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20221130091944.2171610-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

some Intel Alder Lake xHC hosts on ChromeOS platforms need special
workarounds touching port registers at xHC pci host hibernate.

Export xhci_port_state_to_neutral() and xhci_find_slot_id_by_port()
so they can be called from xhci-pci.c and thus the xhci-pci module.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20221130091944.2171610-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ADL-N systems have the same issue as ADL-P, where a large boot firmware
delay is seen if USB ports are left in U3 at shutdown. So apply the
XHCI_RESET_TO_DEFAULT quirk to ADL-N as well.

This patch depends on commit 34cd2db408d5 ("xhci: Add quirk to reset
host back to default state at shutdown").

The issue it fixes is a ~20s boot time delay when booting from S5. It
affects ADL-N devices, and ADL-N support was added starting from v5.16.

Cc: stable@vger.kernel.org
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20221130091944.2171610-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When HCE(Host Controller Error) is set, it means that the xhci hardware
controller has an error at this time, but the current xhci driver
software does not log this event.

By adding an HCE event detection in the xhci interrupt processing
interface, a warning log is output to the system, which is convenient
for system device status tracking.

Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20221130091944.2171610-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit b47ec9727f47d1dce4e8cbc9aef01c80b2332535 as it
breaks the build.

Link: https://lore.kernel.org/r/20221130131854.35b58b16@canb.auug.org.au
Link: https://lore.kernel.org/r/202211301628.iwMjPVMp-lkp@intel.com
Cc: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>