linux-toradex.git/drivers/usb/misc, branch v3.14.37

USB: sisusb: add device id for Magic Control USB video

2014-10-05T21:52:13+00:00

commit 5b6b80aeb21091ed3030b9b6aae597d81326f1aa upstream.

I have a j5 create (JUA210) USB 2 video device and adding it device id
to SIS USB video gets it to work.

Signed-off-by: Stephen Hemminger 
Signed-off-by: Greg Kroah-Hartman

USB: usbtest: add a timeout for scatter-gather tests

2014-07-01T03:11:52+00:00

commit 32b36eeae6a859670d2939a7d6136cb5e9ed64f8 upstream.

In usbtest, tests 5 - 8 use the scatter-gather library in usbcore
without any sort of timeout.  If there's a problem in the gadget or
host controller being tested, the test can hang.

This patch adds a 10-second timeout to the tests, so that they will
fail gracefully with an ETIMEDOUT error instead of hanging.

Signed-off-by: Alan Stern 
Reported-by: Huang Rui 
Tested-by: Huang Rui 
Signed-off-by: Greg Kroah-Hartman

usb: usbtest: fix unlink write error with pattern 1

2014-07-01T03:11:52+00:00

commit e4d58f5dcb7d7be45df8def31881ebfae99c75da upstream.

TEST 12 and TEST 24 unlinks the URB write request for N times. When
host and gadget both initialize pattern 1 (mod 63) data series to
transfer, the gadget side will complain the wrong data which is not
expected.  Because in host side, usbtest doesn't fill the data buffer
as mod 63 and this patch fixed it.

[20285.488974] dwc3 dwc3.0.auto: ep1out-bulk: Transfer Not Ready
[20285.489181] dwc3 dwc3.0.auto: ep1out-bulk: reason Transfer Not Active
[20285.489423] dwc3 dwc3.0.auto: ep1out-bulk: req ffff8800aa6cb480 dma aeb50800 length 512 last
[20285.489727] dwc3 dwc3.0.auto: ep1out-bulk: cmd 'Start Transfer' params 00000000 a9eaf000 00000000
[20285.490055] dwc3 dwc3.0.auto: Command Complete --> 0
[20285.490281] dwc3 dwc3.0.auto: ep1out-bulk: Transfer Not Ready
[20285.490492] dwc3 dwc3.0.auto: ep1out-bulk: reason Transfer Active
[20285.490713] dwc3 dwc3.0.auto: ep1out-bulk: endpoint busy
[20285.490909] dwc3 dwc3.0.auto: ep1out-bulk: Transfer Complete
[20285.491117] dwc3 dwc3.0.auto: request ffff8800aa6cb480 from ep1out-bulk completed 512/512 ===> 0
[20285.491431] zero gadget: bad OUT byte, buf[1] = 0
[20285.491605] dwc3 dwc3.0.auto: ep1out-bulk: cmd 'Set Stall' params 00000000 00000000 00000000
[20285.491915] dwc3 dwc3.0.auto: Command Complete --> 0
[20285.492099] dwc3 dwc3.0.auto: queing request ffff8800aa6cb480 to ep1out-bulk length 512
[20285.492387] dwc3 dwc3.0.auto: ep1out-bulk: Transfer Not Ready
[20285.492595] dwc3 dwc3.0.auto: ep1out-bulk: reason Transfer Not Active
[20285.492830] dwc3 dwc3.0.auto: ep1out-bulk: req ffff8800aa6cb480 dma aeb51000 length 512 last
[20285.493135] dwc3 dwc3.0.auto: ep1out-bulk: cmd 'Start Transfer' params 00000000 a9eaf000 00000000
[20285.493465] dwc3 dwc3.0.auto: Command Complete --> 0

Signed-off-by: Huang Rui 
Signed-off-by: Greg Kroah-Hartman

usb: delete non-required instances of include

2014-01-08T23:01:39+00:00

None of these files are actually using any __init type directives
and hence don't need to include .  Most are just a
left over from __devinit and __cpuinit removal, or simply due to
code getting copied from one driver to the next.

Signed-off-by: Paul Gortmaker 
Signed-off-by: Greg Kroah-Hartman

USB: misc: idmouse: correct spelling mistake in error string

2014-01-03T20:39:31+00:00

Signed-off-by: Rahul Bedarkar 
Signed-off-by: Greg Kroah-Hartman

USB: yurex: fix spelling mistake in comment

2014-01-03T20:37:57+00:00

fix spelling mistake in comment

Signed-off-by: Rahul Bedarkar 
Signed-off-by: Greg Kroah-Hartman

USB: iowarrior: fix spelling mistake in comment

2014-01-03T20:37:57+00:00

Signed-off-by: Rahul Bedarkar 
Signed-off-by: Greg Kroah-Hartman

Merge tag 'for-usb-next-2013-12-20' of git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-next

2013-12-21T23:58:40+00:00

Sarah writes:

xhci: Cleanups, non-urgent fixes for 3.14.

Happy Holidays, Greg!

Here's four patches to be queued to usb-next for 3.14.

One adds a module parameter to the xHCI driver to allow users to enable
xHCI quirks without recompiling their kernel, which you've already said
is fine.  The second patch is a bug fix for new usbtest code that's only
in usb-next.  The third patch is simple cleanup.

The last patch is a non-urgent bug fix for xHCI platform devices.  The
bug has been in the code since 3.9.  You've been asking me to hold off
on non-urgent bug fixes after -rc4/-rc5, so it can go into usb-next, and
be backported to stable once 3.14 is out.

These have all been tested over the past week.  I did run across one
oops, but it turned out to be a bug in 3.12, and therefore not related
to any of these patches.

Please queue these for usb-next and 3.14.

Thanks,
Sarah Sharp

drivers: usb: Mark function as static in usbsevseg.c

2013-12-19T18:23:12+00:00

Mark function my_memlen() as static in misc/usbsevseg.c because it is
not used outside this file.

This eliminates the following warning in misc/usbsevseg.c:
drivers/usb/misc/usbsevseg.c:60:15: warning: no previous prototype for ‘my_memlen’ [-Wmissing-prototypes]

Signed-off-by: Rashika Kheria 
Reviewed-by: Josh Triplett 
Signed-off-by: Greg Kroah-Hartman

usb: usbtest: Always clear halt else further tests will fail

2013-12-19T00:26:12+00:00

In test_halt() we set an endpoint halt condition and return on halt verification
failure, then the enpoint will remain halted and all further tests related
to that enpoint will fail. This is because we don't tackle endpoint halt error condition
in any of the tests. To avoid that situation, make sure to clear the
halt condition before exiting test_halt().

Signed-off-by: Roger Quadros 
Reviewed-by: Felipe Balbi 
Signed-off-by: Greg Kroah-Hartman