linux-toradex.git/drivers/usb/mtu3, branch v5.19-rc1

usb: mtu3: fix USB 3.0 dual-role-switch from device to host

2022-04-21T17:06:41+00:00

Issue description:
  When an OTG port has been switched to device role and then switch back
  to host role again, the USB 3.0 Host (XHCI) will not be able to detect
  "plug in event of a connected USB 2.0/1.0 ((Highspeed and Fullspeed)
  devices until system reboot.

Root cause and Solution:
  There is a condition checking flag "ssusb->otg_switch.is_u3_drd" in
  toggle_opstate(). At the end of role switch procedure, toggle_opstate()
  will be called to set DC_SESSION and SOFT_CONN bit. If "is_u3_drd" was
  set and switched the role to USB host 3.0, bit DC_SESSION and SOFT_CONN
  will be skipped hence caused the port cannot detect connected USB 2.0
  (Highspeed and Fullspeed) devices. Simply remove the condition check to
  solve this issue.

Fixes: d0ed062a8b75 ("usb: mtu3: dual-role mode support")
Cc: stable@vger.kernel.org
Tested-by: Fabien Parent 
Reviewed-by: Chunfeng Yun 
Signed-off-by: Macpaul Lin 
Signed-off-by: Tainping Fang 
Link: https://lore.kernel.org/r/20220419081245.21015-1-macpaul.lin@mediatek.com
Signed-off-by: Greg Kroah-Hartman

usb: mtu3: set interval of FS intr and isoc endpoint

2021-12-21T08:05:45+00:00

Add support to set interval also for FS intr and isoc endpoint.

Fixes: 4d79e042ed8b ("usb: mtu3: add support for usb3.1 IP")
Cc: stable@vger.kernel.org
Signed-off-by: Chunfeng Yun 
Link: https://lore.kernel.org/r/20211218095749.6250-4-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman

usb: mtu3: fix list_head check warning

2021-12-21T08:05:45+00:00

This is caused by uninitialization of list_head.

BUG: KASAN: use-after-free in __list_del_entry_valid+0x34/0xe4

Call trace:
dump_backtrace+0x0/0x298
show_stack+0x24/0x34
dump_stack+0x130/0x1a8
print_address_description+0x88/0x56c
__kasan_report+0x1b8/0x2a0
kasan_report+0x14/0x20
__asan_load8+0x9c/0xa0
__list_del_entry_valid+0x34/0xe4
mtu3_req_complete+0x4c/0x300 [mtu3]
mtu3_gadget_stop+0x168/0x448 [mtu3]
usb_gadget_unregister_driver+0x204/0x3a0
unregister_gadget_item+0x44/0xa4

Fixes: 83374e035b62 ("usb: mtu3: add tracepoints to help debug")
Cc: stable@vger.kernel.org
Reported-by: Yuwen Ng 
Signed-off-by: Chunfeng Yun 
Link: https://lore.kernel.org/r/20211218095749.6250-3-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman

usb: mtu3: add memory barrier before set GPD's HWO

2021-12-21T08:05:44+00:00

There is a seldom issue that the controller access invalid address
and trigger devapc or emimpu violation. That is due to memory access
is out of order and cause gpd data is not correct.
Add mb() to prohibit compiler or cpu from reordering to make sure GPD
is fully written before setting its HWO.

Fixes: 48e0d3735aa5 ("usb: mtu3: supports new QMU format")
Cc: stable@vger.kernel.org
Reported-by: Eddie Hung 
Signed-off-by: Chunfeng Yun 
Link: https://lore.kernel.org/r/20211218095749.6250-2-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman

usb: mtu3: fix interval value for intr and isoc

2021-12-21T08:05:44+00:00

Use the Interval value from isoc/intr endpoint descriptor, no need
minus one. The original code doesn't cause transfer error for
normal cases, but it may have side effect with respond time of ERDY
or tPingTimeout.

Signed-off-by: Chunfeng Yun 
Link: https://lore.kernel.org/r/20211218095749.6250-1-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman

usb: mtu3: enable wake-up interrupt after runtime_suspend called

2021-10-27T18:49:32+00:00

Use the new API dev_pm_set_dedicated_wake_irq_reverse() to request
dedicated wake-up interrupt, due to we want to enable the wake IRQ
after running ->runtime_suspend().

Signed-off-by: Chunfeng Yun 
Signed-off-by: Rafael J. Wysocki

usb: mtu3: fix random remote wakeup

2021-08-26T11:41:52+00:00

Some platforms, e.g. 8183/8192, use low level latch way to keep
wakeup signal, it may latch a wrong signal if debounce more time,
and enable wakeup earlier.
                   ____________________
ip_sleep      ____/                    \__________
                           ___________________
wakeup_signal ____________/                   \______
                      _______________________________
wakeup_en     _______/
                      ^     ^
                      |(1)  |(2)
latch wakeup_signal mistakenly at (1), should latch it at (2);

Workaround: delay about 100us to enable wakeup, meanwhile decrease
debounce time.

Fixes: b1a344589eea ("usb: mtu3: support ip-sleep wakeup for MT8183")
Cc: stable@vger.kernel.org
Signed-off-by: Chunfeng Yun 
Link: https://lore.kernel.org/r/20210826083637.33237-2-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman

usb: mtu3: return successful suspend status

2021-08-26T11:41:52+00:00

Forgot 'return 0;' when suspend successfully, make the mistake
when I split patches.

Fixes: 6b587394c65c ("usb: mtu3: support suspend/resume for dual-role mode")
Signed-off-by: Chunfeng Yun 
Link: https://lore.kernel.org/r/20210826083637.33237-1-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman

usb: mtu3: fix the wrong HS mult value

2021-08-13T11:05:50+00:00

usb_endpoint_maxp() returns actual max packet size, @mult will
always be zero, fix it by using usb_endpoint_maxp_mult() instead
to get mult.

Fixes: 4d79e042ed8b ("usb: mtu3: add support for usb3.1 IP")
Cc: stable@vger.kernel.org
Signed-off-by: Chunfeng Yun 
Link: https://lore.kernel.org/r/1628836253-7432-3-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman

usb: mtu3: use @mult for HS isoc or intr

2021-08-13T11:05:50+00:00

For HS isoc or intr, should use @mult but not @burst
to save mult value.

Fixes: 4d79e042ed8b ("usb: mtu3: add support for usb3.1 IP")
Cc: stable@vger.kernel.org
Signed-off-by: Chunfeng Yun 
Link: https://lore.kernel.org/r/1628836253-7432-2-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman