We need the USB fixes in here as well for some follow-on patches.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Call usb_phy_generic_unregister() if of_platform_populate() fails.

Fixes: d6299b6efbf6 ("usb: musb: Add support of CPPI 4.1 DMA controller to DA8xx")
Cc: stable <stable@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/69af1b1d-d3f4-492b-bcea-359ca5949f30@moroto.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is no specific behaviour implemented to recover from a babble
error. When a BABBLE error happens, recovery fails as connected sticks
are no longer detected by the USB controller.

Implement the recover callback of the MUSB operation to reset the USB
controller when a BABBLE happens.

Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20240528102026.40136-5-bastien.curutchet@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The idle_state is not meant for host-only mode. When the device acts as a
host, it fails to exit the idle state once entered. This prevents new
USB gadgets from being detected once plugged in.

Commit 032ec49f5351 ("usb: musb: drop useless board_mode usage") removed
a is_otg_enabled() check in the try_idle() that prevented from entering
idle_state. This was removed because at that time it was not possible to
select host-only mode with CONFIG_USB_MUSB_HOST so dual role was always
set.

Add #ifndef CONFIG_USB_MUSB_HOST around try_idle() callback to prevent
from entering idle_state when host-only mode has been selected.

Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20240528102026.40136-4-bastien.curutchet@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 7ccf62941a38701ec9a42b4a0fa2868af456e96a.

da8xx_musb_set_mode() forces OTG mode regardless the selected mode even
if the property 'dr_mode = "host"' is present in device-tree. This
causes an unrecoverable error when VBUS supply is shut down : plugged
gadgets are no longer detected once VBUS supply is back.

Reverting it allows to have a selected mode coherent with device-tree's
description. IMO, this shouldn't cause regression because OTG mode is
the default selection when 'dr_mode' property is not set.

Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20240528102026.40136-3-bastien.curutchet@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The musb driver core already supports external vbus control for ULPI
PHYs, but none of the drivers actually enable it. A customer reported
needing this for their device, and now that a DT property for detecting
this configuration exists, read the property to enable the feature.

Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240531-spilt-garage-ed2113d628e8@wendy
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

With the rework of how the __string() handles dynamic strings where it
saves off the source string in field in the helper structure[1], the
assignment of that value to the trace event field is stored in the helper
value and does not need to be passed in again.

This means that with:

  __string(field, mystring)

Which use to be assigned with __assign_str(field, mystring), no longer
needs the second parameter and it is unused. With this, __assign_str()
will now only get a single parameter.

There's over 700 users of __assign_str() and because coccinelle does not
handle the TRACE_EVENT() macro I ended up using the following sed script:

  git grep -l __assign_str | while read a ; do
      sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file;
      mv /tmp/test-file $a;
  done

I then searched for __assign_str() that did not end with ';' as those
were multi line assignments that the sed script above would fail to catch.

Note, the same updates will need to be done for:

  __assign_str_len()
  __assign_rel_str()
  __assign_rel_str_len()

I tested this with both an allmodconfig and an allyesconfig (build only for both).

[1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/

Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts.
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for
Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Darrick J. Wong <djwong@kernel.org>	# xfs
Tested-by: Guenter Roeck <linux@roeck-us.net>

Remove the unused list head 'buffers' and the
'struct free_record' which is also unused below it.

To me it looks like this has always been unused, but I've
not dug into why.

Build test only.

Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Link: https://lore.kernel.org/r/20240504150315.77598-1-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The variable count is being initialized and incremented but it is never
actually referenced in any other way. The variable is redundant and can
be removed.

Cleans up clang scan build warning:
drivers/usb/musb/musb_gadget.c:1747:12: warning: variable 'count' set
but not used [-Wunused-but-set-variable]

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240229115548.218713-1-colin.i.king@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We need the USB and Thunderbolt fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>