linux-toradex.git/drivers/usb/net/Makefile, branch v2.6.16.45

[PATCH] USB: move CONFIG_USB_DEBUG checks into the Makefile

2005-11-17T19:29:55+00:00

This lets us remove a lot of code in the drivers that were all checking
the same thing.  It also found some bugs in a few of the drivers, which
has been fixed up.

Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Linus Torvalds

[PATCH] USB: usbnet (9/9) module for pl2301/2302 cables

2005-09-08T23:28:33+00:00

This wraps up the conversion of the "usbnet" driver structure, by
moving the Prolific PL-2201/2302 minidriver to a module of its own.
It also includes some minor cleanups to the remaining "usbnet" file,
notably removing that long changelog at the top.

Minor historical note:  Linux 2.2 first called the driver for
this hardware "plusb".

Signed-off-by: David Brownell 
Signed-off-by: Greg Kroah-Hartman

[PATCH] USB: usbnet (8/9) module for RNDIS devices

2005-09-08T23:28:33+00:00

This adds host-side RNDIS support to the "usbnet" driver, so Linux can talk
to various devices (often based on WinCE) that otherwise only Windows could
talk to.

Tested with little-endian Linux talking to a Linux-USB Ethernet/RNDIS based
peripheral.  This also includes updates from Eddie C. Dost 
for big-endian SPARC Linux talking to a Nokia 9500 Communicator.

It's still marked as EXPERIMENTAL because this code is so young.  This
ought to let Linux to work with various cable modems that previously
would have been "Windows Only".

Signed-off-by: David Brownell 
Signed-off-by: Greg Kroah-Hartman

[PATCH] USB: usbnet (7/9) module for CDC Ethernet

2005-09-08T23:28:32+00:00

Makes the CDC Ethernet support live in a separate driver module.
This module is a bit special since it exports utility functions
that are reused by the the Zaurus and RNDIS drivers, but it's
not "core" like usbnet itself.

Signed-off-by: David Brownell 
Signed-off-by: Greg Kroah-Hartman

[PATCH] USB: usbnet (6/9) module for Zaurii and compatibles

2005-09-08T23:28:32+00:00

This moves usbnet support for Zaurus and compatibles into its own module.
Other than exporting a couple of helper functions, this just involved
shuffling some code and updating the comments.

Signed-off-by: David Brownell 
Signed-off-by: Greg Kroah-Hartman

[PATCH] USB: usbnet (5/9) module for genesys gl620a cables

2005-09-08T23:28:32+00:00

This moves the GeneSys GL620USB-A support into its own driver file.
It also fixes a "return wrong skb" glitch in the rx unbatching, as
recently reported, and adds some missing byteswaps in the special
"genelink" headers (so it might now work on big-endian Linux).

Signed-off-by: David Brownell 
Signed-off-by: Greg Kroah-Hartman

[PATCH] USB: usbnet (4/9) module for net1080 cables

2005-09-08T23:28:31+00:00

As with the "cdc_subset" and "asix" drivers, this just moves the net1080
support into its one driver module.  In this case there's a small bit of
extra cleanup involved, moving some funky framing logic into the tx_fixup()
routine (resolving a long overdue FIXME).

Minor historical note:  "usbnet" started out as "net1080", then got
generalized to make it easier for other network drivers to reuse the
urb queueing and fault management code here.

Signed-off-by: David Brownell 
Signed-off-by: Greg Kroah-Hartman

[PATCH] USB: usbnet (3/9) module for ASIX Ethernet adapters

2005-09-08T23:28:31+00:00

This patch moves the ASIX AX8817x driver into its own file, just using
the "usbnet" infrastructure as a utility library.

 - As with "cdc_subset" this involved minor Kconfig/kbuild tweaks,
   moving code from one file to another, and exporting a few functions.

 - This includes updates from Jamie Painter to add (and use) a new hook
   to handle the different maximum transfer sizes for rx and tx sides.

 - Also from Jamie, some bugfixes:
    * MDIO byteorder (to address some PPC media negotiation problems);
    * Force alignment at key spots when using ax88772 framing (on some
      embedded hardware, the network stack will break otherwise);
    * Address some link reset problems.

It also makes this driver use the standard (5 seconds vs half second)
control timeouts used elsewhere in USB; and wraps a few lines before
the 80th column (which previously needed it).

Signed-off-by: David Brownell 
Signed-off-by: Greg Kroah-Hartman

[PATCH] USB: usbnet (2/9) module for simple network links

2005-09-08T23:28:31+00:00

This patch creates the first of several separate "minidriver" modules
for "usbnet".  This one handles only the very simplest hardware, which
can be handled almost entirely by the "usbnet" core.

    - Move device-specific bits into new "cdc_subset.c" driver,
      shrinking "usbnet" by a bunch;

    - Export the functions needed to support this minidriver
      (with EXPORT_SYMBOL_GPL);

    - Update Kconfig and kbuild accordingly.

This one handles about a dozen different device types, with the most
notable ones being Gumstix and most Linux-based PDAs (except Zaurus
running that ancient code from Sharp).

Signed-off-by: David Brownell 
Signed-off-by: Greg Kroah-Hartman

[PATCH] zd1201 fixes

2005-05-28T02:23:04+00:00

	In netdev-2.6 we need to update zd1201.c since we don't have
driver/net/wireless/ieee802_11.h anymore.

Signed-off-by: Al Viro