linux-toradex.git/drivers/usb/net, branch v2.6.16

[PATCH] USB: asix - Add device IDs for 0G0 Cable Ethernet

2006-02-01T01:23:38+00:00

Add device IDs for the 0G0 Cable Ethernet device as reported by
Charles Lepple .

Signed-off-by: David Hollis 
Signed-off-by: Greg Kroah-Hartman

[PATCH] USB: zd1201: make sysfs device symlink

2006-01-04T21:51:44+00:00

Noticed that my zd1201 adapter isn't "seen" by hal and NetworkManager.
The problem seems to be that unlike other network device drivers I
checked, zd1201 does not do a SET_NETDEV_DEV(), which makes it so a
"device" symlink is created under /sys/class/net/wlan0.

With the following patch the device symlink shows up, and now I am
happily using NetworkManager to control the adapter:

$ ls -l /sys/class/net/wlan0
total 0
-r--r--r--  1 root root 4096 Dec 18 13:42 address
-r--r--r--  1 root root 4096 Dec 18 13:42 addr_len
-r--r--r--  1 root root 4096 Dec 18 13:42 broadcast
-r--r--r--  1 root root 4096 Dec 18 13:42 carrier
lrwxrwxrwx  1 root root    0 Dec 18 13:42 device -> ../../../devices/pci0001:10/0001:10:1b.1/usb4/4-1
-r--r--r--  1 root root 4096 Dec 18 13:42 features

Signed-off-by: Nathan Lynch 
Signed-off-by: Greg Kroah-Hartman

[PATCH] USB: asix.c - Add Linksys USB200M Rev 2 ids

2006-01-04T21:51:44+00:00

Attached patch adds device IDs for the Linksys USB200M Rev 2 device
which uses the AX88772 chipset.

Signed-off-by: David Hollis 
Signed-off-by: Greg Kroah-Hartman

[PATCH] USB: Use ARRAY_SIZE macro

2006-01-04T21:51:43+00:00

Use ARRAY_SIZE macro instead of sizeof(x)/sizeof(x[0]) and remove
duplicates of ARRAY_SIZE. Some trailing whitespaces are also removed.

Patch is compile-tested on i386.

Signed-off-by: Tobias Klauser 
Signed-off-by: Greg Kroah-Hartman

[PATCH] USB: remove .owner field from struct usb_driver

2006-01-04T21:48:34+00:00

It is no longer needed, so let's remove it, saving a bit of memory.

Signed-off-by: Greg Kroah-Hartman

[PATCH] USB: usb-net: new device ID passed through module parameter

2006-01-04T21:48:31+00:00

adds new module parameter "devid" that points to a string with format
"device_name:vendor_id:device_id:flags".  if provided at module load
time, this string is being parsed and a new entry is created in
usb_dev_id[] and pegasus_ids[] so the new device can later be recognized
by the probe routine.  this might be helpful for someone who don't
know/wish to build new module/kernel, but want to use his new usb-to-eth
device that is not yet listed in pegasus.h

Signed-off-by:	Petko Manolov 
Signed-off-by: Greg Kroah-Hartman

[PATCH] USB: usb-net: removes redundant return

2006-01-04T21:48:30+00:00

removes all redundant collecting of the return value from
get/set_registers() and suchlike.  can't remember who put all of those
some time ago, but they doesn't make any sense to me.  where needed only
a few references remained;

Signed-off-by: Petko Manolov 
Signed-off-by: Greg Kroah-Hartman

[PATCH] USB: move CONFIG_USB_DEBUG checks into the Makefile

2005-11-17T19:29:55+00:00

This lets us remove a lot of code in the drivers that were all checking
the same thing.  It also found some bugs in a few of the drivers, which
has been fixed up.

Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Linus Torvalds

[PATCH] USB: fix race in kaweth disconnect

2005-11-17T19:29:54+00:00

this patch from Herbert Xu fixes a race by moving termination of
the URBs into close() exclusively.

Signed-off-by: Herbert Xu 
Signed-off-by: Oliver Neukum 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Linus Torvalds

[PATCH] USB: fix correct wording in drivers/usb/net/KConfig

2005-10-28T23:47:52+00:00

Signed-off-by: Koen Kooi