linux-toradex.git/drivers/usb/otg/Kconfig, branch v3.0.97

USB: add Freescale USB OTG Transceiver driver

2011-05-02T23:59:38+00:00

Slightly reworked and cleaned up driver from Freescale LTIB
for MPC5121E. The driver has been ported to the current kernel,
proc interface "/proc/driver/fsl_usb2_otg" has been replaced by
sysfs interface.

Signed-off-by: Li Yang 
Signed-off-by: Anatolij Gustschin 
Signed-off-by: Greg Kroah-Hartman

usb: otg: Add ulpi viewport access ops

2011-03-11T22:22:10+00:00

Add generic access ops for controllers with a ulpi viewport register
(e.g. Chipidea/ARC based controllers).

Signed-off-by: Benoit Goby 
Signed-off-by: Greg Kroah-Hartman

USB: Rename "msm72k_otg.c" to "msm_otg.c"

2011-03-07T20:15:21+00:00

This driver is used across all MSM SoCs.  Hence give a generic name.
All Functions and strutures are also using "msm_otg" as prefix.

Signed-off-by: Pavankumar Kondeti 
Signed-off-by: Greg Kroah-Hartman

USB: Fix trout build failure with ci13xxx_msm gadget

2011-02-04T20:38:14+00:00

This patch fixes the below compilation errors.

  CC      drivers/usb/gadget/ci13xxx_msm.o
  CC      net/mac80211/led.o
  drivers/usb/gadget/ci13xxx_msm.c: In function 'ci13xxx_msm_notify_event':
  drivers/usb/gadget/ci13xxx_msm.c:42: error: 'USB_AHBBURST' undeclared (first use in this function)
  drivers/usb/gadget/ci13xxx_msm.c:42: error: (Each undeclared identifier is reported only once
  drivers/usb/gadget/ci13xxx_msm.c:42: error: for each function it appears in.)
  drivers/usb/gadget/ci13xxx_msm.c:43: error: 'USB_AHBMODE' undeclared (first use in this function)
make[4]: *** [drivers/usb/gadget/ci13xxx_msm.o] Error 1
make[3]: *** [drivers/usb/gadget] Error 2

MSM USB driver is not supported on boards like trout (MSM7201) which
has an external PHY.

Signed-off-by: Pavankumar Kondeti 
Signed-off-by: Greg Kroah-Hartman

Merge branch 'musb-hw' of git://gitorious.org/usb/usb into musb

2010-12-15T17:29:38+00:00

* 'musb-hw' of git://gitorious.org/usb/usb: (43 commits)
  usb: musb: core: kill unneeded #include's
  DA8xx: assign name to MUSB IRQ resource
  arm: OMAP4430: musb: Configure musb to OTG mode
  usb: musb: Adding musb support for OMAP4430
  usb: otg: TWL6030: Add twl6030_usb file for compilation
  mfd: TWL6030: OMAP4: Registering the TWL6030-usb device
  usb: musb: TWL6030: Selecting TWL6030_USB transceiver
  usb: otg: Kconfig: Add Kconfig option for TWL6030 transceiver.
  usb: otg: Adding twl6030-usb transceiver driver for OMAP4430
  mfd: TWL6030: USBOTG VBUS event generation on
  usb: musb: add support for ux500 platform
  musb: am35x: fix compile error due to control apis
  arm: omap4: enable usb on 4430sdp
  usb: musb: drop board_set_vbus
  usb: musb: drop musb_platform_suspend/resume
  usb: musb: blackfin: usb dev_pm_ops structure
  usb: musb: am35x: usb dev_pm_ops structure
  usb: musb: omap2430: use dev_pm_ops structure
  usb: musb: omap2430: drop the nops
  usb: musb: mark musb_save/restore_context static
  ...

usb: add ab8500 usb transceiver driver

2010-12-10T22:27:33+00:00

Basic driver for ab8500 usb otg transceiver

TODO:
-Regulators support
-Host and OTG testing
-Interface with PRCMU
-Charging support

Signed-off-by: Mian Yousaf Kaukab 
Acked-by: Linus Walleij 
Signed-off-by: Greg Kroah-Hartman

USB: OTG: msm: Add support for power management

2010-12-10T22:23:32+00:00

Implement runtime and system pm ops to put hardware into low power
mode (LPM). As part of LPM, USB clocks are turned off, PHY is put
into suspend state and PHY comparators are turned off if VBUS/Id
notifications are not required from PHY.

Signed-off-by: Pavankumar Kondeti 
Signed-off-by: Greg Kroah-Hartman

USB: Add MSM OTG Controller driver

2010-12-10T22:23:31+00:00

This driver implements PHY initialization, clock management, ULPI IO ops
and simple OTG state machine to kick host/peripheral based on Id/VBUS
line status.  VBUS/Id lines are tied to a reference voltage on some boards.
Hence provide debugfs interface to select host/peripheral mode.

Signed-off-by: Pavankumar Kondeti 
Signed-off-by: Greg Kroah-Hartman

usb: otg: Kconfig: Add Kconfig option for TWL6030 transceiver.

2010-12-10T12:45:14+00:00

Added the TWL6030-usb transceiver option in the Kconfig

Signed-off-by: Hema HK 
Cc: David Brownell 
Signed-off-by: Felipe Balbi

USB OTG Langwell: Update OTG Kconfig and driver version.

2010-10-22T17:21:33+00:00

This patch updated Kconfig for langwell otg transceiver driver.
Add ipc driver(INTEL_SCU_IPC) as a dependency. Driver version is
updated too.

Signed-off-by: Hao Wu 
Signed-off-by: Alan Cox 
Signed-off-by: Greg Kroah-Hartman