linux-toradex.git/drivers/usb/phy/Kconfig, branch v3.9.2

usb: Fix compile error by selecting USB_OTG_UTILS

2013-03-27T15:49:20+00:00

The current lpc32xx_defconfig breaks like this, caused by recent phy
restructuring:

  LD      init/built-in.o
drivers/built-in.o: In function `usb_hcd_nxp_probe':
drivers/usb/host/ohci-nxp.c:224: undefined reference to `isp1301_get_client'
drivers/built-in.o: In function `lpc32xx_udc_probe':
drivers/usb/gadget/lpc32xx_udc.c:3104: undefined reference to
`isp1301_get_client' distcc[27867] ERROR: compile (null) on localhost failed
make: *** [vmlinux] Error 1

Caused by 1c2088812f095df77f4b3224b65db79d7111a300 (usb: Makefile: fix
drivers/usb/phy/ Makefile entry)

This patch fixes this by selecting USB_OTG_UTILS in Kconfig which
causes the phy driver to be built again.

Signed-off-by: Roland Stigge 
Acked-by: Felipe Balbi 
Signed-off-by: Greg Kroah-Hartman

usb: phy: fix Kconfig warning

2013-01-29T15:33:07+00:00

Recent commits introduced the following
Kconfig warning:

warning: (USB_MUSB_HDRC && OMAP_USB3) selects \
	OMAP_CONTROL_USB which has unmet direct \
	dependencies (USB_SUPPORT && ARCH_OMAP2PLUS)

This patch just fixes it, by removing the
unnecessary OMAP dependency.

Signed-off-by: Felipe Balbi 
Signed-off-by: Greg Kroah-Hartman

usb: phy: add a new driver for usb3 phy

2013-01-25T11:02:50+00:00

Added a driver for usb3 phy that handles the interaction between usb phy
device and dwc3 controller.

This also includes device tree support for usb3 phy driver and
the documentation with device tree binding information is updated.

Currently writing to control module register is taken care in this
driver which will be removed once the control module driver is in place.

Signed-off-by: Kishon Vijay Abraham I 
Signed-off-by: Felipe Balbi 
Signed-off-by: Moiz Sonasath 
Signed-off-by: Felipe Balbi

usb: start using the control module driver

2013-01-25T10:27:24+00:00

Start using the control module driver for powering on the PHY and for
writing to the mailbox instead of writing to the control module
registers on their own.

Signed-off-by: Kishon Vijay Abraham I 
Signed-off-by: Felipe Balbi

usb: phy: add a new driver for usb part of control module

2013-01-25T10:25:36+00:00

Added a new driver for the usb part of control module. This has an API
to power on the USB2 phy and an API to write to the mailbox depending on
whether MUSB has to act in host mode or in device mode.

Writing to control module registers for doing the above task which was
previously done in omap glue and in omap-usb2 phy will be removed.

Signed-off-by: Kishon Vijay Abraham I 
Signed-off-by: Felipe Balbi

usb: phy: samsung: Add host phy support to samsung-phy driver

2013-01-23T11:39:11+00:00

This patch adds host phy support to samsung-usbphy driver and
further adds support for samsung's exynos5250 usb-phy.

Signed-off-by: Praveen Paneri 
Signed-off-by: Vivek Gautam 
Acked-by: Kukjin Kim 
Signed-off-by: Felipe Balbi

usb: phy: samsung: Introducing usb phy driver for hsotg

2013-01-18T13:06:30+00:00

This driver uses usb_phy interface to interact with s3c-hsotg. Supports
phy_init and phy_shutdown functions to enable/disable usb phy. Support
will be extended to host controllers and more Samsung SoCs.

Signed-off-by: Praveen Paneri 
Acked-by: Heiko Stuebner 
Acked-by: Kyungmin Park 
Signed-off-by: Felipe Balbi

ARM: OMAP: Fix drivers to depend on omap for internal devices

2012-12-16T23:23:37+00:00

These devices are not available on other architectures, so
let's limit them to omap.

If the driver subsystem maintainers want to build test
system wide changes without building for each target,
it's easy to carry a test patch that just strips out the
depends entries from Kconfig files.

Signed-off-by: Tony Lindgren 
Signed-off-by: Linus Torvalds

usb: phy: add R-Car USB phy driver

2012-11-01T10:17:53+00:00

This patch adds Renesas R-Car USB phy driver.
It supports R8A7779 chip at this point.

R-Car has some USB controllers, but has only one phy-initializer.
So, this driver is counting users.

Signed-off-by: Kuninori Morimoto 
Signed-off-by: Felipe Balbi

usb: phy: add a new driver for omap usb2 phy

2012-09-06T17:14:53+00:00

All phy related programming like enabling/disabling the clocks, powering
on/off the phy is taken care of by this driver. It is also used for OTG
related functionality like srp.

This also includes device tree support for usb2 phy driver and
the documentation with device tree binding information is updated.

Currently writing to control module register is taken care in this
driver which will be removed once the control module driver is in place.

Cc: Felipe Balbi 
Signed-off-by: Kishon Vijay Abraham I 
Signed-off-by: Felipe Balbi