linux-toradex.git/drivers/usb/phy/phy-am335x-control.c, branch v4.16

USB: add SPDX identifiers to all remaining files in drivers/usb/

2017-11-04T10:48:02+00:00

It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.

Update the drivers/usb/ and include/linux/usb* files with the correct
SPDX license identifier based on the license text in the file itself.
The SPDX identifier is a legally binding shorthand, which can be used
instead of the full boiler plate text.

This work is based on a script and data from Thomas Gleixner, Philippe
Ombredanne, and Kate Stewart.

Cc: Thomas Gleixner 
Cc: Kate Stewart 
Cc: Philippe Ombredanne 
Signed-off-by: Greg Kroah-Hartman 
Acked-by: Felipe Balbi 
Acked-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: phy: am335x-control: fix device and of_node leaks

2016-11-18T11:54:09+00:00

Make sure to drop the references taken by of_parse_phandle() and
bus_find_device() before returning from am335x_get_phy_control().

Note that there is no guarantee that the devres-managed struct
phy_control will be valid for the lifetime of the sibling phy device
regardless of this change.

Fixes: 3bb869c8b3f1 ("usb: phy: Add AM335x PHY driver")
Acked-by: Bin Liu 
Signed-off-by: Johan Hovold 
Signed-off-by: Felipe Balbi

usb: phy: phy-am335x: bypass first VBUS sensing for host-only mode

2015-12-16T16:07:25+00:00

To prevent VBUS contention, the am335x MUSB phy senses VBUS first before
transitioning to host mode. However, for host-only mode, VBUS could be
directly tied to 5V power rail which could prevent MUSB transitions to
host mode.

This change receives dr_mode of the controller then bypass the first
VBUS sensing for host-only mode, so that MUSB can work in host mode
event if VBUS is tied to 5V.

Signed-off-by: Bin Liu 
Signed-off-by: Felipe Balbi

usb: phy: correct the am335x phy header filename

2015-12-16T16:07:25+00:00

The filename of am35x-phy-control.h is confusing. The header is used
by the am335x phy driver, but the filename refers to am35x. Even worse
there is indeed another device called am35x but it does not use this
header at all.

Signed-off-by: Bin Liu 
Signed-off-by: Felipe Balbi

usb: phy: am335x-control: check return value of bus_find_device

2015-03-10T21:28:44+00:00

This fixes a potential null pointer dereference.

Cc:  # v3.16+
Fixes: d4332013919a ("driver core: dev_get_drvdata: Don't check for NULL dev")
Acked-by: Sebastian Andrzej Siewior 
Signed-off-by: David Dueck 
Signed-off-by: Felipe Balbi

Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2014-12-15T00:10:09+00:00

Pull driver core update from Greg KH:
 "Here's the set of driver core patches for 3.19-rc1.

  They are dominated by the removal of the .owner field in platform
  drivers.  They touch a lot of files, but they are "simple" changes,
  just removing a line in a structure.

  Other than that, a few minor driver core and debugfs changes.  There
  are some ath9k patches coming in through this tree that have been
  acked by the wireless maintainers as they relied on the debugfs
  changes.

  Everything has been in linux-next for a while"

* tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits)
  Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries"
  fs: debugfs: add forward declaration for struct device type
  firmware class: Deletion of an unnecessary check before the function call "vunmap"
  firmware loader: fix hung task warning dump
  devcoredump: provide a one-way disable function
  device: Add dev__once variants
  ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries
  ath: use seq_file api for ath9k debugfs files
  debugfs: add helper function to create device related seq_file
  drivers/base: cacheinfo: remove noisy error boot message
  Revert "core: platform: add warning if driver has no owner"
  drivers: base: support cpu cache information interface to userspace via sysfs
  drivers: base: add cpu_device_create to support per-cpu devices
  topology: replace custom attribute macros with standard DEVICE_ATTR*
  cpumask: factor out show_cpumap into separate helper function
  driver core: Fix unbalanced device reference in drivers_probe
  driver core: fix race with userland in device_add()
  sysfs/kernfs: make read requests on pre-alloc files use the buffer.
  sysfs/kernfs: allow attributes to request write buffer be pre-allocated.
  fs: sysfs: return EGBIG on write if offset is larger than file size
  ...

usb: phy: phy-am335x-control: delete unnecessary 'out of memory' messages

2014-11-03T16:01:05+00:00

The memory subsystem has already had similar message for it.

Signed-off-by: Peter Chen 
Signed-off-by: Felipe Balbi

usb: phy: drop owner assignment from platform_drivers

2014-10-20T14:21:50+00:00

A platform_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Wolfram Sang

usb: phy: am335x-control: wait 1ms after power-up transitions

2014-04-21T15:21:24+00:00

Tests have shown that when a power-up transition is followed by other
PHY operations too quickly, the USB port appears dead. Waiting 1ms fixes
this problem.

Signed-off-by: Daniel Mack 
Cc: stable@vger.kernel.org [3.14]
Signed-off-by: Felipe Balbi

usb: phy: am335x-control: include appropriate header file in phy-am335x-control.c

2013-12-19T15:27:42+00:00

Include header file drivers/usb/phy/am35x-phy-control.h in
phy/phy-am335x-control.c because function am335x_get_phy_control() has
its prototype declaration in drivers/usb/phy/am35x-phy-control.h.

Also, remove definition of structure phy_control because it is already
defined in the included header.

This eliminates the following warning in phy/phy-am335x-control.c:
drivers/usb/phy/phy-am335x-control.c:114:21: warning: no previous prototype for ‘am335x_get_phy_control’ [-Wmissing-prototypes]

Signed-off-by: Rashika Kheria 
Reviewed-by: Josh Triplett 
Signed-off-by: Felipe Balbi