linux-toradex.git/drivers/usb/serial/Kconfig, branch v4.4.73

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

2015-06-23T21:08:54+00:00

Pull trivial tree updates from Jiri Kosina:
 "As usual, mostly comment, kerneldoc and printk() fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  lpfc: Grammar s/an negative/a negative/
  ARM: lib/lib1funcs.S: fix typo s/substractions/subtractions/
  cx25821: cx25821-medusa-reg.h: fix 0x0x prefix
  lib: crc-itu-t.[ch] fix 0x0x prefix in integer constants
  rapidio: Fix kerneldoc and comment
  qla4xxx: Fix printk() in qla4_83xx_read_reset_template() and qla4_83xx_pre_loopback_config()
  treewide: Kconfig: fix wording / spelling
  usb/serial: fix grammar in Kconfig help text for FTDI_SIO
  megaraid_sas: fix kerneldoc
  netfilter: ebtables: fix comment grammar
  drm/radeon: fix comment
  isdn: fix grammar in comment
  ARM: KVM: fix comment

usb/serial: fix grammar in Kconfig help text for FTDI_SIO

2015-05-26T13:14:55+00:00

Signed-off-by: Paul Gortmaker 
Signed-off-by: Jiri Kosina

USB: serial: add Google simple serial SubClass support

2014-11-04T17:11:01+00:00

Add support for Google devices that export simple serial
interfaces using the vendor specific SubClass/Protocol pair
0x50/0x01.

Signed-off-by: Anton Staaf 
Reviewed-by: Benson Leung 
[johan: move id entries and update Kconfig]
Signed-off-by: Johan Hovold

USB: serial: keyspan_pda: fix Entrega company name spelling

2014-10-22T09:19:01+00:00

Entrega is misspelled as Entregra or Entrgra, so fix that.

Signed-off-by: Mark Knibbs 
Signed-off-by: Johan Hovold

USB: serial: remove zte_ev driver

2014-09-15T16:43:08+00:00

The zte_ev driver is based on code (once) distributed by ZTE that still
appears to originally have been reverse-engineered and bolted onto the
generic driver.

A closer analysis of the zte_ev setup code reveals that it consists of
standard CDC requests (SET/GET_LINE_CODING and SET_CONTROL_LINE_STATE)
but unfortunately fails to get some of those right. In particular, as
reported by Lei Liu, it fails to lower DTR/RTS on close. It also appears
that the control requests lack the interface argument.

Since line control is already handled properly by the option driver, and
the SET/GET_LINE_CODING requests appears to be redundant (amounts to a
SET 9600 8N1) let's remove the redundant zte_ev driver.

Also move the remaining ZTE PIDs to the generic option modem driver.

Reported-by: Lei Liu 
Signed-off-by: Johan Hovold

USB: serial: add Medtronic CareLink USB driver

2014-09-01T10:04:27+00:00

Add simple driver for Medtronic CareLink USB devices.

Reported-by: Benjamin West 
Tested-by: Benjamin West 
Signed-off-by: Johan Hovold

USB: serial: add Novatel Wireless GPS driver

2014-09-01T10:04:27+00:00

Add simple driver for Novatel Wireless GPS receivers.

Reported-by: Kirk Madsen 
Tested-by: Kirk Madsen 
Signed-off-by: Johan Hovold

USB: serial: add Moxa UPORT 12XX/14XX/16XX driver

2014-01-03T20:34:07+00:00

Add a driver which supports the following Moxa USB to serial converters:
*       2 ports : UPort 1250, UPort 1250I
*       4 ports : UPort 1410, UPort 1450, UPort 1450I
*       8 ports : UPort 1610-8, UPort 1650-8
*      16 ports : UPort 1610-16, UPort 1650-16

The UPORT devices don't directly fit the USB serial model. USB serial
assumes a bulk in/out endpoint pair per serial port. Thus a dual port
USB serial device is expected to have two bulk in/out pairs. The Moxa
UPORT only has one pair for data transfer and places a header on each
transfer over the endpoint indicating for which port the transfer
relates to. There is a second endpoint pair for events, such as modem
control lines changing state, setting baud rates etc. Again, a
multiplexing header is used on these endpoints.

Some ports need to have a kfifo explicitly allocated since the
framework does not allocate one if there is no associated endpoints.
The framework will however free it on unload of the module.

All data transfers are made on port0, yet the locks are taken on PortN.
urb->context points to PortN, even though the URB is for port0.

Where possible, code from the generic driver is called. However
mxuport_process_read_urb_data() is mostly a cut/paste of
usb_serial_generic_process_read_urb().

The driver will attempt to load firmware from userspace and compare
the available version and the running version. If the available
version is newer, it will be download into RAM of the device and
started. This is optional and the driver appears to work O.K. with
older firmware in the devices ROM.

This driver is based on the MOXA driver and retains MOXAs copyright.

[jhovold@gmail.com: fix get_fw_version error path and some style issues]

Signed-off-by: Andrew Lunn 
Reviewed-by: Johan Hovold 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: fix typo in usb serial simple driver Kconfig

2013-09-17T16:36:10+00:00

Signed-off-by: Dave Jones 
Signed-off-by: Greg Kroah-Hartman

USB: serial: move the "simple" drivers into usb-serial-simple.c

2013-08-12T19:14:52+00:00

Instead of having to create a new driver for a "simple" usb to serial
device, mush them all into one file, with a macro, so as to make it easy
to add new ones.

Cc: "René Bürgel" 
Acked-by: Wei Shuai 
Cc: Josh Triplett 
Acked-by: Frans Klaver 
Cc: "Wesley W. Terpstra" 
Cc: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman