linux-toradex.git/drivers/usb/serial/Makefile, branch v3.4.73 Linux kernel for Apalis and Colibri modules USB: serial: metro-usb: add to the build 2012-03-08T21:34:01+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2012-03-08T21:34:01+00:00 62f2a83de0436d5d35eefc668e3b25db54406910 This adds the metro-usb driver to the build system properly. Cc: Aleksey Babahin <tamerlan311@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This adds the metro-usb driver to the build system properly.

Cc: Aleksey Babahin <tamerlan311@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: serial: add Fintek F81232 usb to serial driver 2012-02-28T21:36:35+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2012-02-28T21:36:35+00:00 aac1fc386fa13f9f450909fcfb02e73db55f0c0f This is the first cut at a driver for the Fintek F81232 USB to serial single port converter. This provides the initial framework for the device, and some data can move through it, but no line settings are handled, so it's not that useful yet. It does give people a starting place to work from. Thank to Fintek for providing samples and specifications, without which, this driver would have never been able to be written. Cc: Amanda Ying <Amanda_Ying@fintek.com.tw> Cc: Tom Tsai <Tom_Tsai@fintek.com.tw> Cc: <linux-usb@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This is the first cut at a driver for the Fintek F81232 USB to serial
single port converter.  This provides the initial framework for the
device, and some data can move through it, but no line settings are
handled, so it's not that useful yet.  It does give people a starting
place to work from.

Thank to Fintek for providing samples and specifications, without which,
this driver would have never been able to be written.

Cc: Amanda Ying <Amanda_Ying@fintek.com.tw>
Cc: Tom Tsai <Tom_Tsai@fintek.com.tw>
Cc: <linux-usb@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert "USB: sam-ba: add driver for Atmel SAM Boot Assistant (SAM-BA)" 2011-04-13T23:48:25+00:00 Johan Hovold jhovold@gmail.com 2011-04-04T09:38:07+00:00 b750106bafbf9e8cb888a2b3681f444d8183a296 This reverts commit 90593899de83a6e6fdea563d058acd2f4334e3f9. SAM-BA devices identify themselves CDC-ACM devices and should be using the cdc-acm driver. Since commit 5b239f0aebd4dd6f85b13decf5e18e86e35d57f0 (USB: cdc-acm: Add pseudo modem without AT command capabilities) cdc-acm also binds to them. Note that the Atmel SAM-BA tools expect to use a USB-serial driver and thus require a symlink from /dev/ttyACMn to some /dev/ttyUSBm (with m < 30) to be able to select the device. This is simply a UI-issue that should be fixed by Atmel. Tested with the SAM-BA 2.10 tools and an Atmel at91sam9260-ek. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: Sven Köhler <sven.koehler@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
This reverts commit 90593899de83a6e6fdea563d058acd2f4334e3f9.

SAM-BA devices identify themselves CDC-ACM devices and should be using
the cdc-acm driver.

Since commit 5b239f0aebd4dd6f85b13decf5e18e86e35d57f0 (USB: cdc-acm: Add pseudo
modem without AT command capabilities) cdc-acm also binds to them.

Note that the Atmel SAM-BA tools expect to use a USB-serial driver and thus
require a symlink from /dev/ttyACMn to some /dev/ttyUSBm (with m < 30) to be
able to select the device. This is simply a UI-issue that should be
fixed by Atmel.

Tested with the SAM-BA 2.10 tools and an Atmel at91sam9260-ek.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Cc: Sven Köhler <sven.koehler@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
usb: makefile cleanup 2010-10-22T17:22:07+00:00 matt mooney mfm@muteddisk.com 2010-10-07T02:03:26+00:00 0a2b8a0d1101179fdebc974a7c72b514aede9d9d For all modules, change <module>-objs to <module>-y; remove if-statements and replace with lists using the kbuild idiom; move flags to the top of the file; and fix alignment while trying to maintain the original scheme in each file. None of the dependencies are modified. Signed-off-by: matt mooney <mfm@muteddisk.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
For all modules, change <module>-objs to <module>-y; remove
if-statements and replace with lists using the kbuild idiom; move
flags to the top of the file; and fix alignment while trying to
maintain the original scheme in each file.

None of the dependencies are modified.

Signed-off-by: matt mooney <mfm@muteddisk.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
USB: sam-ba: add driver for Atmel SAM Boot Assistant (SAM-BA) 2010-10-22T17:21:20+00:00 Johan Hovold jhovold@gmail.com 2010-08-18T22:13:48+00:00 90593899de83a6e6fdea563d058acd2f4334e3f9 Add new driver to access the SAM-BA boot application of Atmel AT91SAM devices. The SAM-BA firmware cannot handle merged write requests so we cannot use the generic write implementation (which uses the port write fifo). Tested with the SAM-BA 2.10 tools and an Atmel at91sam9260-ek. Signed-off-by: Johan Hovold <jhovold@gmail.com> Tested-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
Add new driver to access the SAM-BA boot application of Atmel AT91SAM
devices.

The SAM-BA firmware cannot handle merged write requests so we cannot use
the generic write implementation (which uses the port write fifo).

Tested with the SAM-BA 2.10 tools and an Atmel at91sam9260-ek.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Tested-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
USB: add USB serial ssu100 driver 2010-08-10T21:35:44+00:00 Bill Pemberton wfp5p@virginia.edu 2010-07-29T15:05:41+00:00 52af954599396e5945a895035525c703f2761b20 Add support for the Quatech SSU-100 single port usb to serial device. This driver is based on the ftdi_sio.c driver and the original serqt_usb driver from Quatech. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
Add support for the Quatech SSU-100 single port usb to serial device.
This driver is based on the ftdi_sio.c driver and the original
serqt_usb driver from Quatech.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
usb serial: Add generic USB wwan support 2010-05-20T20:21:37+00:00 Matthew Garrett mjg@redhat.com 2010-04-01T16:31:07+00:00 0d4561947b8ddd5d944bdbbdc1ea1d6fd9a06041 The generic USB serial code is ill-suited for high-speed USB wwan devices, resulting in the option driver. However, other non-option devices may also gain similar benefits from not using the generic code. Factorise out the non-option specific code from the option driver and make it available to other users. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
The generic USB serial code is ill-suited for high-speed USB wwan devices,
resulting in the option driver. However, other non-option devices may also
gain similar benefits from not using the generic code. Factorise out the
non-option specific code from the option driver and make it available to
other users.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
USB Serial Driver: ZIO Motherboard 2010-05-20T20:21:32+00:00 Vijay Kumar vijaykumar@zilogic.com 2010-03-10T15:47:56+00:00 2a1e7d5d54c1c046c1fe47dffd119b45087c6de6 Add ZIO Motherboard USB serial interface driver. Signed-off-by: Vijay Kumar B. <vijaykumar@zilogic.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
Add ZIO Motherboard USB serial interface driver.

Signed-off-by: Vijay Kumar B. <vijaykumar@zilogic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
USB: qcaux: driver for auxiliary serial ports on Qualcomm devices 2010-03-02T22:55:19+00:00 Dan Williams dcbw@redhat.com 2010-02-25T18:39:20+00:00 019ccc73201e933fe7d8119c90a812d347e325f9 qcaux: add driver for QCDM-capable ports on various devices Many Qualcomm-based devices provide a CDC-ACM port which accepts normal AT commands and PPP connections. But they only provide one which makes status or signal strength requests impossible while PPP is active. They also provide secondary USB interfaces that talk the Qualcomm Diagnostic Monitor (QCDM) protocol which can be used for status and strength. Make those QCDM ports accessible. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
qcaux: add driver for QCDM-capable ports on various devices

Many Qualcomm-based devices provide a CDC-ACM port which accepts
normal AT commands and PPP connections.  But they only provide one
which makes status or signal strength requests impossible while
PPP is active.  They also provide secondary USB interfaces that
talk the Qualcomm Diagnostic Monitor (QCDM) protocol which can be
used for status and strength.  Make those QCDM ports accessible.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
USB: serial: Add support for ViVOtech ViVOpay devices. 2010-03-02T22:54:57+00:00 Forest Bond forest.bond@outpostembedded.com 2010-02-05T16:30:28+00:00 5272098365514ab232fa6a695d58c3961fec6b7a Add support for USB serial interface provided by ViVOtech ViVOpay devices via new driver vivopay-serial. Currently only the ViVOpay 8800 device is supported, but support for similar devices can be added by adding the appropriate device IDs to the driver. Signed-off-by: Forest Bond <forest.bond@outpostembedded.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
Add support for USB serial interface provided by ViVOtech ViVOpay devices via
new driver vivopay-serial.  Currently only the ViVOpay 8800 device is supported,
but support for similar devices can be added by adding the appropriate device
IDs to the driver.

Signed-off-by: Forest Bond <forest.bond@outpostembedded.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>