commit b579fa52f6be0b4157ca9cc5e94d44a2c89a7e95 upstream. This patch adds support for the Schweitzer Engineering Laboratories C662 USB cable based off the CP210x driver. Signed-off-by: Barry Grussling <barry@grussling.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7681156982026ebf7eafd7301eb0374d7648d068 upstream. Added support for MMB Networks and Planet Innovation Ingeni ZigBee USB devices using customized Silicon Labs' CP210x.c USB to UART bridge drivers with PIDs: 88A4, 88A5. Signed-off-by: Sami Rahman <sami.rahman@mmbresearch.com> Tested-by: Sami Rahman <sami.rahman@mmbresearch.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 90625070c4253377025878c4e82feed8b35c7116 upstream. This adds NetGear Managed Switch M4100 series, M5300 series, M7100 series USB ID (0846:0110) to the cp210x driver. Without this, the serial adapter is not recognized in Linux. Description was obtained from an Netgear Eng. Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a57e82a18779ab8a5e5a1f5841cef937cf578913 upstream. The Rigblaster Advantage is an amateur radio interface sold by West Mountain Radio. It contains a cp210x serial interface but the device ID is not in the driver. Signed-off-by: Steve Conklin <sconklin@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit be3101c23394af59694c8a2aae6d07f5da62fea5 upstream. This patch adds support for the Lake Shore Cryotronics devices to the CP210x driver. These lines are ported from cp210x driver distributed by Lake Shore web site: http://www.lakeshore.com/Documents/Lake%20Shore%20cp210x-3.0.0.tar.gz and licensed under the terms of GPLv2. Moreover, I've tested this changes with Lake Shore 335 in my labs. Signed-off-by: Matwey V. Kornilov <matwey@sai.msu.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 356fe44f4b8ece867bdb9876b1854d7adbef9de2 upstream. Signed-off-by: Markus Becker <mab@comnets.uni-bremen.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3fcc8f96829776cf181918461923d1e3bbb831a2 upstream. This patch adds 10 device IDs for CP210x based devices from the following manufacturers: Timewave Clipsal Festo Link Instruments Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5bbfa6f427c1d7244a5ee154ab8fa37265a5e049 upstream. Signed-off-by: Mikko Tuumanen <mikko.tuumanen@qemsoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixed too small hardcoded timeout values for usb_control_msg in driver for SiliconLabs cp210x-based usb-to-serial adapters. Replaced with USB_CTRL_GET_TIMEOUT/USB_CTRL_SET_TIMEOUT. Signed-off-by: Yuri Matylitski <ym@tekinsoft.com> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch updates the cp210x driver to support CP210x multiple interface devices devices from Silicon Labs. The existing driver always sends control requests to interface 0, which is hardcoded in the usb_control_msg function calls. This only allows for single interface devices to be used, and causes a bug when using ports on an interface other than 0 in the multiple interface devices. Here are the changes included in this patch: - Updated the device list to contain the Silicon Labs factory default VID/PID for multiple interface CP210x devices - Created a cp210x_port_private struct created for each port on startup, this struct holds the interface number - Added a cp210x_release function to clean up the cp210x_port_private memory created on startup - Modified usb_get_config and usb_set_config to get a pointer to the cp210x_port_private struct, and use the interface number there in the usb_control_message wIndex param Signed-off-by: Preston Fick <preston.fick@silabs.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>