linux-toradex.git/drivers/usb/serial/empeg.c, branch v3.11

USB: serial: remove driver version information

2012-10-31T19:48:06+00:00

Remove all MODULE_VERSION macros and driver-version information (except
for garmin_gps which uses it in a status reply).

It is the kernel version that matters and not some private version
scheme which rarely even gets updated.

Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2012-10-01T20:23:01+00:00

Pull USB changes from Greg Kroah-Hartman:
 "Here is the big USB pull request for 3.7-rc1

  There are lots of gadget driver changes (including copying a bunch of
  files into the drivers/staging/ccg/ directory so that the other gadget
  drivers can be fixed up properly without breaking that driver), and we
  remove the old obsolete ub.c driver from the tree.

  There are also the usual XHCI set of updates, and other various driver
  changes and updates.  We also are trying hard to remove the old dbg()
  macro, but the final bits of that removal will be coming in through
  the networking tree before we can delete it for good.

  All of these patches have been in the linux-next tree.

  Signed-off-by: Greg Kroah-Hartman "

Fix up several annoying - but fairly mindless - conflicts due to the
termios structure having moved into the tty device, and often clashing
with dbg -> dev_dbg conversion.

* tag 'usb-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (339 commits)
  USB: ezusb: move ezusb.c from drivers/usb/serial to drivers/usb/misc
  USB: uas: fix gcc warning
  USB: uas: fix locking
  USB: Fix race condition when removing host controllers
  USB: uas: add locking
  USB: uas: fix abort
  USB: uas: remove aborted field, replace with status bit.
  USB: uas: fix task management
  USB: uas: keep track of command urbs
  xhci: Intel Panther Point BEI quirk.
  powerpc/usb: remove checking PHY_CLK_VALID for UTMI PHY
  USB: ftdi_sio: add TIAO USB Multi-Protocol Adapter (TUMPA) support
  Revert "usb : Add sysfs files to control port power."
  USB: serial: remove vizzini driver
  usb: host: xhci: Fix Null pointer dereferencing with 71c731a for non-x86 systems
  Increase XHCI suspend timeout to 16ms
  USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irq
  USB: sierra_ms: don't keep unused variable
  fsl/usb: Add support for USB controller version 2.4
  USB: qcaux: add Pantech vendor class match
  ...

USB: serial: empeg.c: remove debug module parameter

2012-09-14T19:31:22+00:00

Now that the dbg() macro is no longer being used in the driver,
the debug module parameter doesn't do anything at all.  So remove
it so as to not confuse people.

CC: Gary Brubaker 
Signed-off-by: Greg Kroah-Hartman

tty: move the termios object into the tty

2012-07-16T20:00:41+00:00

This will let us sort out a whole pile of tty related races. The
alternative would be to keep points and refcount the termios objects.
However
1. They are tiny anyway
2. Many devices don't use the stored copies
3. We can remove a pty special case

Signed-off-by: Alan Cox 
Signed-off-by: Greg Kroah-Hartman

USB: serial: rework usb_serial_register/deregister_drivers()

2012-05-08T22:46:14+00:00

This reworks the usb_serial_register_drivers() and
usb_serial_deregister_drivers() to not need a pointer to a struct
usb_driver anymore.  The usb_driver structure is now created dynamically
and registered and unregistered as needed.

This saves lines of code in each usb-serial driver.  All in-kernel users
of these functions were also fixed up at this time.  The pl2303 driver
was tested that everything worked properly.

Thanks for the idea to do this from Alan Stern.

Cc: Adhir Ramjiawan 
Cc: Alan Stern 
Cc: Al Borchers 
Cc: Aleksey Babahin 
Cc: Andrew Morton 
Cc: Andrew Worsley 
Cc: Bart Hartgers 
Cc: Bill Pemberton 
Cc: Dan Carpenter 
Cc: Dan Williams 
Cc: Donald Lee 
Cc: Eric Dumazet 
Cc: "Eric W. Biederman" 
Cc: Felipe Balbi 
Cc: Gary Brubaker 
Cc: Jesper Juhl 
Cc: Jiri Kosina 
Cc: Johan Hovold 
Cc: Julia Lawall 
Cc: Kautuk Consul 
Cc: Kuninori Morimoto 
Cc: Lonnie Mendez 
Cc: Matthias Bruestle and Harald Welte 
Cc: Matthias Urlichs 
Cc: Mauro Carvalho Chehab 
Cc: Michal Sroczynski 
Cc: "Michał Wróbel" 
Cc: Oliver Neukum 
Cc: Paul Gortmaker 
Cc: Peter Berger 
Cc: Preston Fick 
Cc: "Rafael J. Wysocki" 
Cc: Rigbert Hamisch 
Cc: Rusty Russell 
Cc: Simon Arlott 
Cc: Support Department 
Cc: Thomas Tuttle 
Cc: Uwe Bonnes 
Cc: Wang YanQing 
Cc: William Greathouse 
Signed-off-by: Greg Kroah-Hartman

USB: serial: remove usb_serial_disconnect call in all drivers

2012-05-07T21:02:13+00:00

This is now set by the usb-serial core, no need for the driver to
individually set it.

Thanks to Alan Stern for the idea to get rid of it.

Cc: William Greathouse 
Cc: Matthias Bruestle and Harald Welte 
Cc: Lonnie Mendez 
Cc: Peter Berger 
Cc: Al Borchers 
Cc: Gary Brubaker 
Cc: Oliver Neukum 
Cc: Matthias Urlichs 
Cc: Support Department 
Cc: Rusty Russell 
Cc: Alan Stern 
Cc: Mauro Carvalho Chehab 
Cc: Kautuk Consul 
Cc: Bill Pemberton 
Cc: Paul Gortmaker 
Cc: Bart Hartgers 
Cc: Johan Hovold 
Cc: Preston Fick 
Cc: Uwe Bonnes 
Cc: Simon Arlott 
Cc: Andrew Worsley 
Cc: "Michał Wróbel" 
Cc: Andrew Morton 
Cc: Eric Dumazet 
Cc: "Eric W. Biederman" 
Cc: Felipe Balbi 
Cc: Aleksey Babahin 
Cc: Dan Carpenter 
Cc: Jiri Kosina 
Cc: Donald Lee 
Cc: Julia Lawall 
Cc: Michal Sroczynski 
Cc: Wang YanQing 
Cc: Dan Williams 
Cc: Thomas Tuttle 
Cc: Rigbert Hamisch 
Cc: "Rafael J. Wysocki" 
Cc: Kuninori Morimoto 
Cc: Jesper Juhl 
Cc: Adhir Ramjiawan 
Signed-off-by: Greg Kroah-Hartman

USB: serial: remove usb_serial_probe call in all drivers

2012-05-07T20:48:33+00:00

This is now set by the usb-serial core, no need for the driver to
individually set it.

Thanks to Alan Stern for the idea to get rid of it.

Cc: William Greathouse 
Cc: Matthias Bruestle and Harald Welte 
Cc: Lonnie Mendez 
Cc: Peter Berger 
Cc: Al Borchers 
Cc: Gary Brubaker 
Cc: Oliver Neukum 
Cc: Matthias Urlichs 
Cc: Support Department 
Cc: Rusty Russell 
Cc: Alan Stern 
Cc: Mauro Carvalho Chehab 
Cc: Kautuk Consul 
Cc: Bill Pemberton 
Cc: Paul Gortmaker 
Cc: Bart Hartgers 
Cc: Johan Hovold 
Cc: Preston Fick 
Cc: Uwe Bonnes 
Cc: Simon Arlott 
Cc: Andrew Worsley 
Cc: "Michał Wróbel" 
Cc: Andrew Morton 
Cc: Eric Dumazet 
Cc: "Eric W. Biederman" 
Cc: Felipe Balbi 
Cc: Aleksey Babahin 
Cc: Dan Carpenter 
Cc: Jiri Kosina 
Cc: Donald Lee 
Cc: Julia Lawall 
Cc: Michal Sroczynski 
Cc: Wang YanQing 
Cc: Dan Williams 
Cc: Thomas Tuttle 
Cc: Rigbert Hamisch 
Cc: "Rafael J. Wysocki" 
Cc: Kuninori Morimoto 
Cc: Jesper Juhl 
Cc: Adhir Ramjiawan 
Signed-off-by: Greg Kroah-Hartman

USB: empeg.c: remove dbg() tracing calls

2012-05-03T23:43:59+00:00

dbg() was used a lot a long time ago to trace code flow.  Now that we have
ftrace, this isn't needed at all, so remove these calls.

CC: Gary Brubaker 
Signed-off-by: Greg Kroah-Hartman

USB: serial: empeg.c: use module_usb_serial_driver

2012-02-28T21:11:42+00:00

This converts the empeg.c driver to use the module_usb_serial_driver() call
instead of having to have a module_init/module_exit function, saving a lot
of duplicated code.

CC: Gary Brubaker 
Signed-off-by: Greg Kroah-Hartman

usb-serial: use new registration API in [d-h]* drivers

2012-02-24T20:39:18+00:00

This patch (as1524) modifies the following usb-serial drivers to
utilize the new usb_serial_{de}register_drivers() routines:

	digi_acceleport, empeg, ftdi_sio, funsoft, garmin_gps,
	and hp4x.

Signed-off-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman